CHANGELOG

================================================================================
bladeRF HDL Change Log Summary

For more detailed information, please see the git change log and issue tracker
hosted on GitHub: https://github.com/nuand/bladeRF
================================================================================

--------------------------------
v0.15.2 (2023-06-26)
--------------------------------

Corrects RX timestamp when MIMO enabled.

 Fixes:
 *  hdl: MIMO RX timestamp correction

--------------------------------
v0.15.1 (2023-04-03)
--------------------------------

Fixes timestamps and signal generator when 8bit format enabled.

 Fixes:
 *  hdl: 8bit support for signal_generator.vhd
 *  hdl: 8bit RX timestamp correction

--------------------------------
v0.15.0 (2023-02-13)
--------------------------------

 Added 8bit mode feature necessary for oversampling on the bladeRF 2.0 micro

 Fixes:
 *  hdl: rx-adsb: update rx-adsb and bladerf-adsb to handle packet_mode

 Features:
 *  hdl: 8bit mode added

--------------------------------
v0.14.0 (2021-10-01)
--------------------------------

 Fix several bugs in packet mode buffering mechanism, and add Wishbone master
   core as NiOS peripheral. Add support for bladeRF 2.0 micro xA5.

 Fixes:
 *  hdl: fix RX halting issue in packet mode
 *  hdl: ensure meta_fifos never overflow
 *  hdl: disconnect nios_ss_n bus from GPIO(20 downto 19)

 Features:
 *  hdl: add Wishbone master to bladeRF 2.0 micro's bladeRF-hosted revision
 *  hdl: add Wishbone master IP NiOS peripheral


--------------------------------
v0.12.0 (2020-08-01)
--------------------------------

 This version adds short packet states to the GPIF allowing the FPGA to exchange
 variable length packets with the FX3.

 Features:

 * bladerf: added support for short packets

--------------------------------
v0.11.1 (2020-09-12)
--------------------------------

 This version includes a few bug fixes that mostly affect meta mode.

 Fixes:

 * hdl: meta_time_go clear if in WAIT state for longer than a cycle
 * hdl: avoid consecutive data_valid on adc_stream

--------------------------------
v0.11.0 (2019-05-05)
--------------------------------

 This version improves buffering on the FPGA, and extends quicktune's controls
 over the XB gpio register.

 Fixes:

 * hdl: buffer sizes and checks
 * hdl: misc fixes

 Features:

 * bladerf: quicktune controls XB gpio register

--------------------------------
v0.10.2 (2018-12-17)
--------------------------------

 This version improves the FPGA-based tuning support on the bladeRF2, adding
 quick tuning, a standby state (initialized but idle), and defining user space
 for API commands.

 Fixes:

 * bladerf2: retune2: fix RF path selection in adi_rfspdt_select
 * bladerf2: FPGA tuning: invalidate RFIC frequency on quick tune
 * bladerf2: FPGA tuning: Fix GAIN command on TX channels
 * bladerf2: FPGA tuning: Fix TX sample rate being wrong
 * bladerf2: FPGA tuning: Fix GAINMODE command
 * bladerf2: FPGA tuning: Fix implosion when state change OFF->STANDBY
 * build: fix SignalTap variable name
 * build: fix patch ordering in fpga/ip/adi

 Features:

 * bladerf2: FPGA tuning: add FASTLOCK command
 * bladerf2: FPGA tuning: add standby (warm idle) state
 * bladerf2: FPGA tuning: define user-defined command space

--------------------------------
v0.10.1 (2018-12-06)
--------------------------------
 This version is part of development series of changes, not an official release.

 This version adds FPGA-based tuning for the bladeRF2. This tuning mode has the
 following advantages over host-based tuning:

 * Faster command processing: the Nios II processor on the FPGA handles the
   RFIC control directly, instead of relaying SPI commands between the host
   and RFIC. This improves turnaround time slightly.

 * State preservation: the device itself maintains the RFIC state, so closing
   and re-opening the device no longer requires reinitialization. In practice,
   this is about a 7.5x speedup when doing a "warm" open of an
   already-initialized device.

 * Headless operation: more and improved host-based functionalities are
   available in headless mode

 Features:

 * bladerf2: add FPGA-based tuning
 * bladerf2: increase Nios II RAM footprint from 32 kB to 128 kB

--------------------------------
v0.10.0 (2018-11-26)
--------------------------------
 This version is part of development series of changes, not an official release.

 This version adds quick tuning on bladeRF2 devices.

 Fixes:

 * build: add -S option to specify fitter seed
 * nios: Fix Eclipse project, update docs
 * build: add device and device family to qsys scripts
 * build: fix escaping on Windows
 * fpga_common: check return val in lms_set_frequency (#691)

 Features:

 * bladerf2: add fastlock functions, increase Nios RAM from 16 to 32 kB
 * bladerf2: implement pkt_retune2 packet format for quick tuning

--------------------------------
v0.9.0 (2018-10-26)
--------------------------------
 * bladeRF: hosted: fix typo in toggle_led1
 * bladeRF: move AGC SPI driver into 80 MHz clock domain (fixes #640) (#642)
 * bladeRF: timing improvements (fixes #395) (#652)
 * build: Cygwin compatibility (#660)
 * bladeRF: adsb: adjust build and FIFO type to match bladeRF-micro impl
 * bladeRF-micro: adsb: implement support for ADS-B core on bladeRF micro
 * fx3_gpif: clean up metadata flags field in GPIF
 * fifo_writer: add metadata flags for miniexp{1,2} IO pin status
 * nios: clarify README.md
 * bladeRF-micro: add false path constraint for pwr_status (#681)
 * bladeRF-micro: weak pull-up on fx3_uart_rxd (fixes #679) (#683)

--------------------------------
v0.8.0 (2018-09-05)
--------------------------------
 * bladeRF: Fix nios_gpio assignment overlap for AGC_EN
 * bladeRF: Fix bug in AGC band selection

--------------------------------
v0.7.3 (2018-08-07)
--------------------------------
 * Initial release with bladeRF Micro support
 * bladeRF Micro: Update pin-outs and constraints for Rev1.1+ PCBs
 * bladeRF Micro: Latch TX data going to the RFIC's DAC

--------------------------------
v0.7.2 (2018-03-26)
--------------------------------
 This version is part of development series of changes, not an official release.

 * Redesign build system to support multiple product models
 * Added support for the bladeRF Micro
 * Refactoring, bug fixes, and other misc. improvements

--------------------------------
v0.7.1 (2017-12-07)
--------------------------------
 * Minor fix-ups

--------------------------------
v0.7.0 (2017-07-02)
--------------------------------
 * Added support for the Automatic Gain Control

--------------------------------
v0.6.0 (2015-05-25)
--------------------------------
 * Added TRX synchronization trigger functionality via J71-4.

--------------------------------
v0.5.0 (2015-11-23)
--------------------------------
 * Added support for 1 PPS and 10 MHz input to tame VCTCXO
 * Added FIFO between TX and RX for digital loopback mode for clock
   synchronization and additional sample buffering.

--------------------------------
v0.4.1 (2015-09-01)
--------------------------------
 * Fixed bug in XB GPIO masked writes introduced in v0.4.0

--------------------------------
v0.4.0 (2015-08-27)
--------------------------------
 * Added support for multi-write of TX and RX NINT/NFRAC registers
    - LMS6002D PLL registers are written atomically to allow for
      slightly cleaner retuning.

--------------------------------
v0.3.5 (2015-08-25)
--------------------------------
 * Build and simulation fixes

--------------------------------
v0.3.4 (2015-07-24)
--------------------------------
 * Fixed a bug where multiple TX NOW bursts would accumulate samples
   in the RX FIFO and was causing a slip in metadata headers versus samples.
 * Modified sample FIFOs to have under/overflow checking
 * Register FIFO reader output
 * Addressed some warnings about latches.
 * Build fixes for atsc_tx image 

--------------------------------
v0.3.3 (2015-06-30)
--------------------------------
 * Addressed timing constraint issue by reducing LMS SPI clock rate.
 * Renamed SPI controller module

--------------------------------
v0.3.2 (2015-06-23)
--------------------------------
 * Fixed VCTCXO readback

--------------------------------
v0.3.1 (2015-06-17)
--------------------------------
 * Added faster, custom SPI block for LMS6 communication.
    - This custom block removes large gaps of time between CSn and the clocking
      of data, as well as gaps of time between bytes.

v0.3.0 (2015-06-17)
--------------------------------
 This version is part of development series of changes, not an official release.

 * Added support for the following packet formats.
    - pkt_8x8
    - pkt_8x16
    - pkt_8x32
    - pkt_8x64
    - pkt_32x32

   For more information about these packet formats, see:
    bladeRF/hdl/fpga/ip/altera/nios_system/software/bladeRF_nios/README.md

v0.2.0 (2015-06-17)
--------------------------------
 This version is part of development series of changes, not an official release.

 * Build updated for Quartus II 15.0
    - Earlier Quartus versions are not compatible.

 * Redesigned control/configuration program running on NIOS II
    - This introduces support for different packet formats for
      NIOS II <-> host communication.
    - Readability and performance improvements

 * The time tamers have been separated and now have programmable interrupts.

 * Added tuning support:
    - The LMS6 VCOCAP search can now be performed in the NIOS,
      cutting out overhead incurred when performing all register accesses
      via the host.
    - A "Quick tune" option allows the LMS6 to be tuned using previously
      determined settings, instead of running the full tuning algorithm.
    - Introduced scheduled retune support


v0.1.2 (2014-10-22)
--------------------------------
 * Fixed issues with TX_NOW and dropped messages. This fixes issues
   #334 and #335.

v0.1.1 (2014-10-22)
--------------------------------
 * Fixed timing errors that caused failures in SPI communication with the
   LMS6002D. This addresses the LMS calbration failure assocaited with issue
   #269.

v0.1.0 (2014-10-21)
--------------------------------
 * Backwards-compatible features introduced:
    - Added option to divide sample counter by 2.
    - Added "TX_NOW"

 * Fixes:
    - Addessed data/timestamp slipping
    - Fixed readback of current timestamp value
    - Send zero samples TX module to mitigate effect of default output power
      from the LMS after intialization.


v0.0.6 (2014-07-20)
--------------------------------
 * Fixed FPGA correction for gain/phase

v0.0.5 (2014-06-21)
--------------------------------
 * Added expansion board support for XB-200


v0.0.4 (2014-05-07)
--------------------------------
 * Added metadata timestamp support
    - Added RX/TX metadata FIFOs
 * Added FPGA digital loopback


v0.0.3 (2014-02-01)
--------------------------------
 * Tweaked constraints for FX3 interface drive strength
 * Add 32-bit counter mode for RX performance testing


v0.0.2 (2014-01-14)
--------------------------------
 * Tweaked constraints for the FX3 interface
 * Fixed SPI/UART signal contention issue
 * Fixed phase range for IQ correction block


v0.0.1 (2013-12-28)
--------------------------------
 * Updated to use Quartus 13.1 tools
    - Renamed OpenCores I2C Qsys core to not conflict
 * Introduced faster UART bridge (4Mbps versus 115.2kbps)
 * Added IQ correction block
 * Added FPGA version numbering
 * Made FX3 GPIF FSM more maintainable