IPSO objects used in the Creator WiFire application

This guide describes the object definitions used in the Creator Wifire application.

ObjectID	Name	Description
0	Security	Bootstrap server could override configured security settings.
1	Server	Device server LWM2M settings - set by the Bootstrap server
2	Access Control	Access control - set by the bootstrap server. WiFire currently ignores this.
3	Device	Device object - default values set by the application. WiFire currently ignores the device reboot command. Read only values provided by WiFire: Manufacturer Device type Serial number Software version

Object/ID	Name	Description
3200	IPSO Digital Input	InstanceIDs 0-1 = WiFire buttons 1..2. Device server can observe (subscribe to) button presses.
3311	IPSO Light Control	InstanceIDs 0-3 = WiFire LEDs 1..4.
3202	IPSO Analogue Input	InstanceID 0 = WiFire input voltage from potentiometer (0 to 3.3V). Server can read current value + min/max values (since startup or last reset_stats command)
3303	IPSO Temperature Sensor	InstanceID 0 = Read temperature from WiFire's PIC32MZ internal chip temperature sensor. The server can read current value + min/max values (since startup or last reset_stats command). Temperature is returned in Celsius (units = 'Cel'). Note: The internal temperature of the WiFire is normally ≈40ºC so this sensor is not useful for measuring ambient temperature.

Object/ID	Name	Description
20001	ExecuteCommand	InstanceID 0 = Execute a WiFire console command

ObjectID: 20001

Resource ID	Resource	Description	Operations	Instances	Mandatory	Type
0	Value	Execute command to be executed. WiFire supports the commands that can be executed from the console command line with the exception of interactive commands.	Read, write	Single	Mandatory	String
1	Count	Number of execute commands received by WiFire. Note: both valid and invalid commands are counted	Read	Single	Mandatory	Integer

For further information please visit:

Provide feedback