diff --git a/Configure/Printer.cfg/Trident_JUNE_2WD_300_Model_2240.cfg b/Configure/Printer.cfg/2WD_300_Model_TMC2240.cfg
similarity index 99%
rename from Configure/Printer.cfg/Trident_JUNE_2WD_300_Model_2240.cfg
rename to Configure/Printer.cfg/2WD_300_Model_TMC2240.cfg
index cf5c84b..3fd6d36 100644
--- a/Configure/Printer.cfg/Trident_JUNE_2WD_300_Model_2240.cfg
+++ b/Configure/Printer.cfg/2WD_300_Model_TMC2240.cfg
@@ -332,7 +332,7 @@ bicubic_tension: 0.2             # Algorithm interpolation, no movement
 pin: EBBCan:gpio14               # Hotend fan pin
 heater: extruder                 # Associated heating device
 heater_temp: 50.0                # Temperature to start the fan
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 
 #--------------------------------------------------------------------
 
@@ -349,7 +349,7 @@ fan_speed: 0.5                   # Fan speed
 
 [controller_fan driver_fan]      # Driver cooling fan
 pin: PF8                         # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 max_power: 1.0                   # Maximum power
 shutdown_speed: 0.0              # Shutdown speed
 fan_speed: 0.8                   # Fan speed when heater or stepper driver is active (0.0 to 1.0). Default is 1.0.
@@ -370,7 +370,7 @@ stepper: stepper_x               # Active motors
 
 [fan_generic fan0]               # 5015 Part cooling Blower 
 pin: EBBCan:gpio13               # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 hardware_pwm: false              # hardware pwm
 
 #--------------------------------------------------------------------
@@ -385,7 +385,7 @@ kick_start_time: 0.5             # start-up time (Please do not change)
 
 [fan_generic fan3]               # Fume_Pack Exhaust Fan
 pin: PF7                         # Fan pin     
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 hardware_pwm: false               # hardware pwm
 kick_start_time: 0.5             # start-up time (Please do not change)
 
diff --git a/Configure/Printer.cfg/Trident_JUNE_2WD_300_Model_5160.cfg b/Configure/Printer.cfg/2WD_300_Model_TMC5160.cfg
similarity index 99%
rename from Configure/Printer.cfg/Trident_JUNE_2WD_300_Model_5160.cfg
rename to Configure/Printer.cfg/2WD_300_Model_TMC5160.cfg
index 3edf881..44f9f0c 100644
--- a/Configure/Printer.cfg/Trident_JUNE_2WD_300_Model_5160.cfg
+++ b/Configure/Printer.cfg/2WD_300_Model_TMC5160.cfg
@@ -333,7 +333,7 @@ bicubic_tension: 0.2             # Algorithm interpolation, no movement
 pin: EBBCan:gpio14               # Hotend fan pin
 heater: extruder                 # Associated heating device
 heater_temp: 50.0                # Temperature to start the fan
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 
 #--------------------------------------------------------------------
 
@@ -350,7 +350,7 @@ fan_speed: 0.5                   # Fan speed
 
 [controller_fan driver_fan]      # Driver cooling fan
 pin: PF8                         # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 max_power: 1.0                   # Maximum power
 shutdown_speed: 0.0              # Shutdown speed
 fan_speed: 0.8                   # Fan speed when heater or stepper driver is active (0.0 to 1.0). Default is 1.0.
@@ -371,7 +371,7 @@ stepper: stepper_x               # Active motors
 
 [fan_generic fan0]               # 5015 Part cooling Blower 
 pin: EBBCan:gpio13               # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 hardware_pwm: false              # hardware pwm
 
 #--------------------------------------------------------------------
@@ -386,7 +386,7 @@ kick_start_time: 0.5             # start-up time (Please do not change)
 
 [fan_generic fan3]               # Fume_Pack Exhaust Fan
 pin: PF7                         # Fan pin     
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 hardware_pwm: false               # hardware pwm
 kick_start_time: 0.5             # start-up time (Please do not change)
 
@@ -398,7 +398,6 @@ gcode:
     {% set speed = (params.S|float / 255 if params.S is defined else 1.0) %}
     SET_FAN_SPEED FAN={fan} SPEED={speed}
 
-
 #####################################################################
 ##                            RGB-LED Lights
 #####################################################################
diff --git a/Configure/Printer.cfg/Trident_JUNE_2WD_350_Model_2240.cfg b/Configure/Printer.cfg/2WD_350_Model_TMC2240.cfg
similarity index 99%
rename from Configure/Printer.cfg/Trident_JUNE_2WD_350_Model_2240.cfg
rename to Configure/Printer.cfg/2WD_350_Model_TMC2240.cfg
index f827664..2416e55 100644
--- a/Configure/Printer.cfg/Trident_JUNE_2WD_350_Model_2240.cfg
+++ b/Configure/Printer.cfg/2WD_350_Model_TMC2240.cfg
@@ -331,7 +331,7 @@ bicubic_tension: 0.2             # Algorithm interpolation, no movement
 pin: EBBCan:gpio14               # Hotend fan pin
 heater: extruder                 # Associated heating device
 heater_temp: 50.0                # Temperature to start the fan
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 
 #--------------------------------------------------------------------
 
@@ -348,7 +348,7 @@ fan_speed: 0.5                   # Fan speed
 
 [controller_fan driver_fan]      # Driver cooling fan
 pin: PF8                         # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 max_power: 1.0                   # Maximum power
 shutdown_speed: 0.0              # Shutdown speed
 fan_speed: 0.8                   # Fan speed when heater or stepper driver is active (0.0 to 1.0). Default is 1.0.
@@ -369,7 +369,7 @@ stepper: stepper_x               # Active motors
 
 [fan_generic fan0]               # 5015 Part cooling Blower 
 pin: EBBCan:gpio13               # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 hardware_pwm: false              # hardware pwm
 
 #--------------------------------------------------------------------
@@ -384,7 +384,7 @@ kick_start_time: 0.5             # start-up time (Please do not change)
 
 [fan_generic fan3]               # Fume_Pack Exhaust Fan
 pin: PF7                         # Fan pin     
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 hardware_pwm: false               # hardware pwm
 kick_start_time: 0.5             # start-up time (Please do not change)
 
diff --git a/Configure/Printer.cfg/Trident_JUNE_2WD_350_Model_5160.cfg b/Configure/Printer.cfg/2WD_350_Model_TMC5160.cfg
similarity index 99%
rename from Configure/Printer.cfg/Trident_JUNE_2WD_350_Model_5160.cfg
rename to Configure/Printer.cfg/2WD_350_Model_TMC5160.cfg
index aa44174..7b24f32 100644
--- a/Configure/Printer.cfg/Trident_JUNE_2WD_350_Model_5160.cfg
+++ b/Configure/Printer.cfg/2WD_350_Model_TMC5160.cfg
@@ -334,7 +334,7 @@ bicubic_tension: 0.2             # Algorithm interpolation, no movement
 pin: EBBCan:gpio14               # Hotend fan pin
 heater: extruder                 # Associated heating device
 heater_temp: 50.0                # Temperature to start the fan
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 
 #--------------------------------------------------------------------
 
@@ -351,7 +351,7 @@ fan_speed: 0.5                   # Fan speed
 
 [controller_fan driver_fan]      # Driver cooling fan
 pin: PF8                         # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 max_power: 1.0                   # Maximum power
 shutdown_speed: 0.0              # Shutdown speed
 fan_speed: 0.8                   # Fan speed when heater or stepper driver is active (0.0 to 1.0). Default is 1.0.
@@ -372,7 +372,7 @@ stepper: stepper_x               # Active motors
 
 [fan_generic fan0]               # 5015 Part cooling Blower 
 pin: EBBCan:gpio13               # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 hardware_pwm: false              # hardware pwm
 
 #--------------------------------------------------------------------
@@ -387,7 +387,7 @@ kick_start_time: 0.5             # start-up time (Please do not change)
 
 [fan_generic fan3]               # Fume_Pack Exhaust Fan
 pin: PF7                         # Fan pin     
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 hardware_pwm: false               # hardware pwm
 kick_start_time: 0.5             # start-up time (Please do not change)
 
@@ -399,7 +399,6 @@ gcode:
     {% set speed = (params.S|float / 255 if params.S is defined else 1.0) %}
     SET_FAN_SPEED FAN={fan} SPEED={speed}
 
-
 #####################################################################
 ##                            RGB-LED Lights
 #####################################################################
diff --git a/Configure/Printer.cfg/Trident_JUNE_AWD_300_Model_2240.cfg b/Configure/Printer.cfg/AWD_300_Model_TMC2240.cfg
similarity index 99%
rename from Configure/Printer.cfg/Trident_JUNE_AWD_300_Model_2240.cfg
rename to Configure/Printer.cfg/AWD_300_Model_TMC2240.cfg
index a063e7e..0adef10 100644
--- a/Configure/Printer.cfg/Trident_JUNE_AWD_300_Model_2240.cfg
+++ b/Configure/Printer.cfg/AWD_300_Model_TMC2240.cfg
@@ -367,7 +367,7 @@ bicubic_tension: 0.2             # Algorithm interpolation, no movement
 pin: EBBCan:gpio14               # Hotend fan pin
 heater: extruder                 # Associated heating device
 heater_temp: 50.0                # Temperature to start the fan
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 
 #--------------------------------------------------------------------
 
@@ -384,7 +384,7 @@ fan_speed: 0.5                   # Fan speed
 
 [controller_fan driver_fan]      # Driver cooling fan
 pin: PF8                         # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 max_power: 1.0                   # Maximum power
 shutdown_speed: 0.0              # Shutdown speed
 fan_speed: 0.8                   # Fan speed when heater or stepper driver is active (0.0 to 1.0). Default is 1.0.
@@ -405,7 +405,7 @@ stepper: stepper_x               # Active motors
 
 [fan_generic fan0]               # 5015 Part cooling Blower 
 pin: EBBCan:gpio13               # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 hardware_pwm: false              # hardware pwm
 
 #--------------------------------------------------------------------
@@ -420,7 +420,7 @@ kick_start_time: 0.5             # start-up time (Please do not change)
 
 [fan_generic fan3]               # Fume_Pack Exhaust Fan
 pin: PF7                         # Fan pin     
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 hardware_pwm: false               # hardware pwm
 kick_start_time: 0.5             # start-up time (Please do not change)
 
diff --git a/Configure/Printer.cfg/Trident_JUNE_AWD_300_Model_5160.cfg b/Configure/Printer.cfg/AWD_300_Model_TMC5160.cfg
similarity index 99%
rename from Configure/Printer.cfg/Trident_JUNE_AWD_300_Model_5160.cfg
rename to Configure/Printer.cfg/AWD_300_Model_TMC5160.cfg
index ec17f08..4dea862 100644
--- a/Configure/Printer.cfg/Trident_JUNE_AWD_300_Model_5160.cfg
+++ b/Configure/Printer.cfg/AWD_300_Model_TMC5160.cfg
@@ -371,7 +371,7 @@ bicubic_tension: 0.2             # Algorithm interpolation, no movement
 pin: EBBCan:gpio14               # Hotend fan pin
 heater: extruder                 # Associated heating device
 heater_temp: 50.0                # Temperature to start the fan
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 
 #--------------------------------------------------------------------
 
@@ -388,7 +388,7 @@ fan_speed: 0.5                   # Fan speed
 
 [controller_fan driver_fan]      # Driver cooling fan
 pin: PF8                         # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 max_power: 1.0                   # Maximum power
 shutdown_speed: 0.0              # Shutdown speed
 fan_speed: 0.8                   # Fan speed when heater or stepper driver is active (0.0 to 1.0). Default is 1.0.
@@ -409,7 +409,7 @@ stepper: stepper_x               # Active motors
 
 [fan_generic fan0]               # 5015 Part cooling Blower 
 pin: EBBCan:gpio13               # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 hardware_pwm: false              # hardware pwm
 
 #--------------------------------------------------------------------
@@ -424,7 +424,7 @@ kick_start_time: 0.5             # start-up time (Please do not change)
 
 [fan_generic fan3]               # Fume_Pack Exhaust Fan
 pin: PF7                         # Fan pin     
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 hardware_pwm: false               # hardware pwm
 kick_start_time: 0.5             # start-up time (Please do not change)
 
diff --git a/Configure/Printer.cfg/Trident_JUNE_AWD_350_Model_2240.cfg b/Configure/Printer.cfg/AWD_350_Model_TMC2240.cfg
similarity index 99%
rename from Configure/Printer.cfg/Trident_JUNE_AWD_350_Model_2240.cfg
rename to Configure/Printer.cfg/AWD_350_Model_TMC2240.cfg
index 9f586b8..e6c5008 100644
--- a/Configure/Printer.cfg/Trident_JUNE_AWD_350_Model_2240.cfg
+++ b/Configure/Printer.cfg/AWD_350_Model_TMC2240.cfg
@@ -358,7 +358,6 @@ probe_count: 10,10               # Number of sampling points (7X7 is 49 points)
 mesh_pps: 2,2                    # Additional sampling points
 algorithm: bicubic               # Algorithm model
 bicubic_tension: 0.2             # Algorithm interpolation, no movement
-
 #####################################################################
 ##                  Fans
 #####################################################################
@@ -367,7 +366,7 @@ bicubic_tension: 0.2             # Algorithm interpolation, no movement
 pin: EBBCan:gpio14               # Hotend fan pin
 heater: extruder                 # Associated heating device
 heater_temp: 50.0                # Temperature to start the fan
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 
 #--------------------------------------------------------------------
 
@@ -384,7 +383,7 @@ fan_speed: 0.5                   # Fan speed
 
 [controller_fan driver_fan]      # Driver cooling fan
 pin: PF8                         # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 max_power: 1.0                   # Maximum power
 shutdown_speed: 0.0              # Shutdown speed
 fan_speed: 0.8                   # Fan speed when heater or stepper driver is active (0.0 to 1.0). Default is 1.0.
@@ -405,7 +404,7 @@ stepper: stepper_x               # Active motors
 
 [fan_generic fan0]               # 5015 Part cooling Blower 
 pin: EBBCan:gpio13               # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 hardware_pwm: false              # hardware pwm
 
 #--------------------------------------------------------------------
@@ -420,7 +419,7 @@ kick_start_time: 0.5             # start-up time (Please do not change)
 
 [fan_generic fan3]               # Fume_Pack Exhaust Fan
 pin: PF7                         # Fan pin     
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 hardware_pwm: false               # hardware pwm
 kick_start_time: 0.5             # start-up time (Please do not change)
 
diff --git a/Configure/Printer.cfg/Trident_JUNE_AWD_350_Model_5160.cfg b/Configure/Printer.cfg/AWD_350_Model_TMC5160.cfg
similarity index 99%
rename from Configure/Printer.cfg/Trident_JUNE_AWD_350_Model_5160.cfg
rename to Configure/Printer.cfg/AWD_350_Model_TMC5160.cfg
index eb9febb..435a8db 100644
--- a/Configure/Printer.cfg/Trident_JUNE_AWD_350_Model_5160.cfg
+++ b/Configure/Printer.cfg/AWD_350_Model_TMC5160.cfg
@@ -371,7 +371,7 @@ bicubic_tension: 0.2             # Algorithm interpolation, no movement
 pin: EBBCan:gpio14               # Hotend fan pin
 heater: extruder                 # Associated heating device
 heater_temp: 50.0                # Temperature to start the fan
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 
 #--------------------------------------------------------------------
 
@@ -388,7 +388,7 @@ fan_speed: 0.5                   # Fan speed
 
 [controller_fan driver_fan]      # Driver cooling fan
 pin: PF8                         # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 max_power: 1.0                   # Maximum power
 shutdown_speed: 0.0              # Shutdown speed
 fan_speed: 0.8                   # Fan speed when heater or stepper driver is active (0.0 to 1.0). Default is 1.0.
@@ -409,7 +409,7 @@ stepper: stepper_x               # Active motors
 
 [fan_generic fan0]               # 5015 Part cooling Blower 
 pin: EBBCan:gpio13               # Fan pin 
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                  # Cycle time
 hardware_pwm: false              # hardware pwm
 
 #--------------------------------------------------------------------
@@ -424,7 +424,7 @@ kick_start_time: 0.5             # start-up time (Please do not change)
 
 [fan_generic fan3]               # Fume_Pack Exhaust Fan
 pin: PF7                         # Fan pin     
-cycle_time: 0.01                 # Cycle time
+cycle_time: 0.00003                 # Cycle time
 hardware_pwm: false               # hardware pwm
 kick_start_time: 0.5             # start-up time (Please do not change)
 
@@ -436,7 +436,6 @@ gcode:
     {% set speed = (params.S|float / 255 if params.S is defined else 1.0) %}
     SET_FAN_SPEED FAN={fan} SPEED={speed}
 
-
 #####################################################################
 ##                            RGB-LED Lights
 #####################################################################