diff --git a/resources/profiles/Anycubic.json b/resources/profiles/Anycubic.json index a9f897aef5c..ba7e86fed52 100644 --- a/resources/profiles/Anycubic.json +++ b/resources/profiles/Anycubic.json @@ -59,6 +59,10 @@ { "name": "Anycubic Kobra 3", "sub_path": "machine/Anycubic Kobra 3.json" + }, + { + "name": "Anycubic Kobra S1", + "sub_path": "machine/Anycubic Kobra S1.json" } ], "process_list": [ @@ -225,6 +229,10 @@ { "name": "0.40mm Standard @Anycubic Kobra 3 0.8 nozzle", "sub_path": "process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json" + }, + { + "name": "0.20mm Standard @Anycubic Kobra S1 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json" } ], "filament_list": [ @@ -375,6 +383,38 @@ { "name": "Anycubic PLA @Anycubic Kobra 3 0.8 nozzle", "sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 0.8 nozzle.json" + }, + { + "name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle", + "sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json" + }, + { + "name": "Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle", + "sub_path": "filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json" + }, + { + "name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle", + "sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json" + }, + { + "name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle", + "sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json" + }, + { + "name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle", + "sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json" + }, + { + "name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle", + "sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json" + }, + { + "name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle", + "sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json" + }, + { + "name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle", + "sub_path": "filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json" } ], "machine_list": [ @@ -449,6 +489,10 @@ { "name": "Anycubic Kobra 3 0.8 nozzle", "sub_path": "machine/Anycubic Kobra 3 0.8 nozzle.json" + }, + { + "name": "Anycubic Kobra S1 0.4 nozzle", + "sub_path": "machine/Anycubic Kobra S1 0.4 nozzle.json" } ] } diff --git a/resources/profiles/Anycubic/Anycubic Kobra S1_buildplate_model.stl b/resources/profiles/Anycubic/Anycubic Kobra S1_buildplate_model.stl new file mode 100644 index 00000000000..79d6e08316d Binary files /dev/null and b/resources/profiles/Anycubic/Anycubic Kobra S1_buildplate_model.stl differ diff --git a/resources/profiles/Anycubic/Anycubic Kobra S1_buildplate_texture.svg b/resources/profiles/Anycubic/Anycubic Kobra S1_buildplate_texture.svg new file mode 100644 index 00000000000..d5a4c3d2aae --- /dev/null +++ b/resources/profiles/Anycubic/Anycubic Kobra S1_buildplate_texture.svg @@ -0,0 +1,35 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/profiles/Anycubic/Anycubic Kobra S1_cover.png b/resources/profiles/Anycubic/Anycubic Kobra S1_cover.png new file mode 100644 index 00000000000..c84e2cb4cf7 Binary files /dev/null and b/resources/profiles/Anycubic/Anycubic Kobra S1_cover.png differ diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..34309e817e1 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,252 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "from": "system", + "instantiation": "true", + "name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle", + "inherits": "fdm_filament_abs", + "filament_settings_id": [ + "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "nozzle_temperature": [ + "250" + ], + "compatible_printers": [ + "Anycubic Kobra S1 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "Cool Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "5" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_load_time": [ + "31.925" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "24.75" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "100" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.04" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..b4340af15a1 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "filament_id": "GFA99", + "setting_id": "GFSA04", + "from": "system", + "instantiation": "true", + "name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle", + "inherits": "fdm_filament_asa", + "filament_settings_id": [ + "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "260" + ], + "compatible_printers": [ + "Anycubic Kobra S1 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "Cool Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "5" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_load_time": [ + "31.925" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "24.75" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "100" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "60" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.045" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..210f7a5f06b --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "filament_id": "GFG99", + "setting_id": "GFSA04", + "from": "system", + "instantiation": "true", + "name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle", + "inherits": "fdm_filament_pet", + "filament_settings_id": [ + "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "230" + ], + "compatible_printers": [ + "Anycubic Kobra S1 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "Cool Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_load_time": [ + "31.925" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "80" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "24.75" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.056" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..b7f08146681 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,258 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "from": "system", + "instantiation": "true", + "name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle", + "inherits": "fdm_filament_pla", + "filament_settings_id": [ + "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "205" + ], + "compatible_printers": [ + "Anycubic Kobra S1 0.4 nozzle" + ], + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0.042,0.72,5000\n0.044,1.44,5000\n0.045,2.16,5000\n0.045,2.88,5000\n0.045,3.58,5000\n0.044,4.3,5000\n0.045,5.02,5000\n0.043,5.73,5000\n0.045,6.45,5000\n0.041,7.17,5000\n0.039,7.89,5000\n0.038,8.61,5000\n0.036,9.33,5000\n0.033,10.05,5000\n0.032,10.77,5000\n0.034,11.49,5000\n0.033,12.21,5000" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "bed_type": [ + "Cool Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_load_time": [ + "31.925" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "24.75" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..e8437990506 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "from": "system", + "instantiation": "true", + "name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle", + "inherits": "fdm_filament_pla", + "filament_settings_id": [ + "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "nozzle_temperature": [ + "205" + ], + "compatible_printers": [ + "Anycubic Kobra S1 0.4 nozzle" + ], + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "bed_type": [ + "Cool Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode" + ], + "filament_is_support": [ + "0" + ], + "filament_load_time": [ + "31.925" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "249" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "24.75" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.036" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..702b93ec282 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,256 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "from": "system", + "is_custom_defined": "0", + "instantiation": "true", + "name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle", + "inherits": "fdm_filament_pla", + "filament_settings_id": [ + "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "230" + ], + "compatible_printers": [ + "Anycubic Kobra S1 0.4 nozzle" + ], + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "bed_type": [ + "Cool Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode" + ], + "filament_is_support": [ + "0" + ], + "filament_load_time": [ + "31.925" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_lift_above": [ + "0.3" + ], + "filament_retract_lift_below": [ + "249" + ], + "filament_retract_lift_enforce": [ + "All Surfaces" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "24.75" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.036" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..40721fed020 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "from": "system", + "instantiation": "true", + "name": "Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle", + "inherits": "fdm_filament_pla", + "filament_settings_id": [ + "Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "nozzle_temperature": [ + "210" + ], + "compatible_printers": [ + "Anycubic Kobra S1 0.4 nozzle" + ], + "activate_air_filtration": [ + "1" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "bed_type": [ + "Cool Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode " + ], + "filament_is_support": [ + "0" + ], + "filament_load_time": [ + "31.925" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_lift_above": [ + "0.3" + ], + "filament_retract_lift_below": [ + "249" + ], + "filament_retract_lift_enforce": [ + "All Surfaces" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "24.75" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.04" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..6b34ac8636c --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "filament_id": "GFU99", + "setting_id": "GFSA04", + "from": "system", + "instantiation": "true", + "name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle", + "inherits": "fdm_filament_tpu", + "filament_settings_id": [ + "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "3.2" + ], + "nozzle_temperature": [ + "205" + ], + "compatible_printers": [ + "Anycubic Kobra S1 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "bed_type": [ + "Cool Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_load_time": [ + "31.925" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unload_time": [ + "24.75" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/fdm_filament_abs.json b/resources/profiles/Anycubic/filament/fdm_filament_abs.json index 7e478a37f3f..55f18c5ee97 100644 --- a/resources/profiles/Anycubic/filament/fdm_filament_abs.json +++ b/resources/profiles/Anycubic/filament/fdm_filament_abs.json @@ -4,22 +4,25 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "filament_type": [ + "ABS" + ], + "cool_plate_temp": [ "105" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "105" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "105" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "105" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "105" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "105" ], "slow_down_for_layer_cooling": [ @@ -34,9 +37,6 @@ "filament_max_volumetric_speed": [ "28.6" ], - "filament_type": [ - "ABS" - ], "filament_density": [ "1.04" ], @@ -79,4 +79,4 @@ "slow_down_layer_time": [ "3" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/fdm_filament_asa.json b/resources/profiles/Anycubic/filament/fdm_filament_asa.json index 29a752a4ee0..9495d854775 100644 --- a/resources/profiles/Anycubic/filament/fdm_filament_asa.json +++ b/resources/profiles/Anycubic/filament/fdm_filament_asa.json @@ -4,22 +4,25 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "filament_type": [ + "ASA" + ], + "cool_plate_temp": [ "105" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "105" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "105" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "105" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "105" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "105" ], "slow_down_for_layer_cooling": [ @@ -34,9 +37,6 @@ "filament_max_volumetric_speed": [ "28.6" ], - "filament_type": [ - "ASA" - ], "filament_density": [ "1.04" ], @@ -79,4 +79,4 @@ "slow_down_layer_time": [ "3" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/fdm_filament_common.json b/resources/profiles/Anycubic/filament/fdm_filament_common.json index f1e09f49dcb..457f288c633 100644 --- a/resources/profiles/Anycubic/filament/fdm_filament_common.json +++ b/resources/profiles/Anycubic/filament/fdm_filament_common.json @@ -3,22 +3,22 @@ "name": "fdm_filament_common", "from": "system", "instantiation": "false", - "cool_plate_temp" : [ + "cool_plate_temp": [ "60" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "60" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "60" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "60" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "60" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "60" ], "overhang_fan_threshold": [ @@ -135,4 +135,4 @@ "temperature_vitrification": [ "100" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/fdm_filament_pa.json b/resources/profiles/Anycubic/filament/fdm_filament_pa.json index e75e2e9f6c9..e8c8dea0e86 100644 --- a/resources/profiles/Anycubic/filament/fdm_filament_pa.json +++ b/resources/profiles/Anycubic/filament/fdm_filament_pa.json @@ -4,22 +4,25 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "filament_type": [ + "PA" + ], + "cool_plate_temp": [ "0" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "100" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "100" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "0" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "100" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "100" ], "slow_down_for_layer_cooling": [ @@ -34,9 +37,6 @@ "filament_max_volumetric_speed": [ "8" ], - "filament_type": [ - "PA" - ], "filament_density": [ "1.04" ], @@ -76,4 +76,4 @@ "slow_down_layer_time": [ "2" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/fdm_filament_pc.json b/resources/profiles/Anycubic/filament/fdm_filament_pc.json index 89f770017e7..3192f802c57 100644 --- a/resources/profiles/Anycubic/filament/fdm_filament_pc.json +++ b/resources/profiles/Anycubic/filament/fdm_filament_pc.json @@ -4,22 +4,25 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "filament_type": [ + "PC" + ], + "cool_plate_temp": [ "0" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "110" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "110" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "0" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "110" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "110" ], "slow_down_for_layer_cooling": [ @@ -34,9 +37,6 @@ "filament_max_volumetric_speed": [ "23.2" ], - "filament_type": [ - "PC" - ], "filament_density": [ "1.04" ], @@ -79,4 +79,4 @@ "slow_down_layer_time": [ "2" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/fdm_filament_pet.json b/resources/profiles/Anycubic/filament/fdm_filament_pet.json index 2f98be665f1..4d7ba4ada09 100644 --- a/resources/profiles/Anycubic/filament/fdm_filament_pet.json +++ b/resources/profiles/Anycubic/filament/fdm_filament_pet.json @@ -4,22 +4,25 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "filament_type": [ + "PETG" + ], + "cool_plate_temp": [ "60" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "0" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "80" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "60" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "0" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "80" ], "slow_down_for_layer_cooling": [ @@ -34,9 +37,6 @@ "filament_max_volumetric_speed": [ "25" ], - "filament_type": [ - "PETG" - ], "filament_density": [ "1.27" ], @@ -73,4 +73,4 @@ "filament_start_gcode": [ "; filament start gcode\n" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/fdm_filament_pla.json b/resources/profiles/Anycubic/filament/fdm_filament_pla.json index de2f3c2a71d..5426679f332 100644 --- a/resources/profiles/Anycubic/filament/fdm_filament_pla.json +++ b/resources/profiles/Anycubic/filament/fdm_filament_pla.json @@ -4,37 +4,37 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", + "filament_type": [ + "PLA" + ], "fan_cooling_layer_time": [ "100" ], "filament_max_volumetric_speed": [ "12" ], - "filament_type": [ - "PLA" - ], "filament_density": [ "1.24" ], "filament_cost": [ "20" ], - "cool_plate_temp" : [ + "cool_plate_temp": [ "35" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "0" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "45" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "35" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "0" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "45" ], "nozzle_temperature_initial_layer": [ @@ -85,4 +85,4 @@ "filament_start_gcode": [ "; filament start gcode\n" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/fdm_filament_pva.json b/resources/profiles/Anycubic/filament/fdm_filament_pva.json index f529bb39af4..eee5675ea88 100644 --- a/resources/profiles/Anycubic/filament/fdm_filament_pva.json +++ b/resources/profiles/Anycubic/filament/fdm_filament_pva.json @@ -4,22 +4,25 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "filament_type": [ + "PVA" + ], + "cool_plate_temp": [ "35" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "0" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "45" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "35" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "0" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "45" ], "fan_cooling_layer_time": [ @@ -34,9 +37,6 @@ "filament_is_support": [ "1" ], - "filament_type": [ - "PVA" - ], "filament_density": [ "1.24" ], @@ -91,4 +91,4 @@ "filament_start_gcode": [ "; filament start gcode\n" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/filament/fdm_filament_tpu.json b/resources/profiles/Anycubic/filament/fdm_filament_tpu.json index d5cc57fbcc0..3d14ece1691 100644 --- a/resources/profiles/Anycubic/filament/fdm_filament_tpu.json +++ b/resources/profiles/Anycubic/filament/fdm_filament_tpu.json @@ -4,22 +4,25 @@ "from": "system", "instantiation": "false", "inherits": "fdm_filament_common", - "cool_plate_temp" : [ + "filament_type": [ + "TPU" + ], + "cool_plate_temp": [ "30" ], - "eng_plate_temp" : [ + "eng_plate_temp": [ "30" ], - "hot_plate_temp" : [ + "hot_plate_temp": [ "35" ], - "cool_plate_temp_initial_layer" : [ + "cool_plate_temp_initial_layer": [ "30" ], - "eng_plate_temp_initial_layer" : [ + "eng_plate_temp_initial_layer": [ "30" ], - "hot_plate_temp_initial_layer" : [ + "hot_plate_temp_initial_layer": [ "35" ], "fan_cooling_layer_time": [ @@ -28,9 +31,6 @@ "filament_max_volumetric_speed": [ "15" ], - "filament_type": [ - "TPU" - ], "filament_density": [ "1.24" ], @@ -79,4 +79,4 @@ "filament_start_gcode": [ "; filament start gcode\n" ] -} +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..234ff532d9f --- /dev/null +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,233 @@ +{ + "type": "machine", + "from": "system", + "setting_id": "GM001", + "inherits": "fdm_machine_common", + "instantiation": "true", + "printer_technology": "FFF", + "version": "1.3.2412.21", + "printer_settings_id": "Anycubic Kobra S1 0.4 nozzle", + "printer_model": "Anycubic Kobra S1", + "printer_variant": "0.4", + "name": "Anycubic Kobra S1 0.4 nozzle", + "nozzle_diameter": [ + "0.4" + ], + "default_print_profile": "0.20mm Standard @Anycubic Kobra S1 0.4 nozzle", + "default_filament_profile": [ + "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle" + ], + "disable_m73": "1", + "gcode_flavor": "klipper", + "printable_area": [ + "0x0", + "250x0", + "250x250", + "0x250" + ], + "printable_height": "250", + "thumbnails": "230x110/PNG", + "thumbnails_format": "PNG", + "thumbnails_internal": "512x512/PNG/top", + "thumbnails_internal_switch": "1", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [], + "bed_mesh_max": "0,0", + "bed_mesh_min": "0,0", + "bed_mesh_probe_distance": "0,0", + "before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ + "0" + ], + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "240", + "extruder_clearance_height_to_rod": "48", + "extruder_clearance_radius": "60", + "extruder_colour": [ + "#FF4D4F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "is_custom_defined": "0", + "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "G92 E0\nG1 E-2 F3000\n{if max_layer_z < max_print_height-1}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F900 ; Move print head further up{endif} \nG1 F12000; present print\nG1 X44; throw_position_x\nG1 Y270; throw_position_y\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", + "machine_load_filament_time": "126.423", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "10000", + "10000" + ], + "machine_max_acceleration_y": [ + "10000", + "10000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3" + ], + "machine_max_speed_e": [ + "80", + "80" + ], + "machine_max_speed_x": [ + "600", + "600" + ], + "machine_max_speed_y": [ + "600", + "600" + ], + "machine_max_speed_z": [ + "15", + "15" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "M601", + "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "brass", + "nozzle_volume": "71.6", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printer_notes": "", + "printer_structure": "corexy", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0.3" + ], + "retract_lift_below": [ + "249" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "0.8" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "0", + "support_multi_bed_types": "0", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe": [ + "1" + ], + "wipe_distance": [ + "1" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Slope Lift" + ], + "z_offset": "0" +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json new file mode 100644 index 00000000000..e1c76e46be8 --- /dev/null +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "machine_tech": "FFF", + "family": "Anycubic", + "name": "Anycubic Kobra S1", + "model_id": "Anycubic Kobra S1", + "nozzle_diameter": "0.4", + "bed_model": "Anycubic Kobra S1_buildplate_model.stl", + "bed_texture": "Anycubic Kobra S1_buildplate_texture.svg", + "hotend_model": "", + "default_materials": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic ABS @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic PA @Anycubic Kobra S1 0.4 nozzle;Anycubic PC @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PVA @Anycubic Kobra S1 0.4 nozzle;Anycubic TPU @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json new file mode 100644 index 00000000000..187545de6b5 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json @@ -0,0 +1,292 @@ +{ + "type": "process", + "from": "system", + "setting_id": "GP004", + "name": "0.20mm Standard @Anycubic Kobra S1 0.4 nozzle", + "inherits": "fdm_process_common", + "instantiation": "true", + "is_custom_defined": "0", + "version": "1.3.2412.13", + "print_settings_id": "0.20mm Standard @Anycubic Kobra S1 0.4 nozzle", + "layer_height": "0.2", + "filename_format": "{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra S1 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "0.9", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.075", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "80", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "250", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "overhang_speed_classic": "1", + "overhang_totally_speed": "10", + "post_process": [], + "precise_outer_wall": "1", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "35", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "0", + "seam_slope_min_length": "10", + "seam_slope_start_height": "0", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "crosshatch", + "sparse_infill_speed": "270", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "30", + "support_top_z_distance": "0.18", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "25%", + "top_shell_layers": "5", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "200", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "outer wall/inner wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} \ No newline at end of file