diff --git a/resources/profiles/Ratrig.json b/resources/profiles/Ratrig.json index e983dbebe3b..526c138845e 100644 --- a/resources/profiles/Ratrig.json +++ b/resources/profiles/Ratrig.json @@ -1,398 +1,651 @@ -{ - "name": "RatRig", - "version": "02.02.00.04", - "force_update": "0", - "description": "RatRig configurations", - "machine_model_list": [ - { - "name": "RatRig V-Core 3 200", - "sub_path": "machine/RatRig V-Core 3 200.json" - }, - { - "name": "RatRig V-Core 3 300", - "sub_path": "machine/RatRig V-Core 3 300.json" - }, - { - "name": "RatRig V-Core 3 400", - "sub_path": "machine/RatRig V-Core 3 400.json" - }, - { - "name": "RatRig V-Core 3 500", - "sub_path": "machine/RatRig V-Core 3 500.json" - }, - { - "name": "RatRig V-Minion", - "sub_path": "machine/RatRig V-Minion.json" - }, - { - "name": "RatRig V-Cast", - "sub_path": "machine/RatRig V-Cast.json" - }, - { - "name": "RatRig V-Core 4 300", - "sub_path": "machine/RatRig V-Core 4 300.json" - }, - { - "name": "RatRig V-Core 4 400", - "sub_path": "machine/RatRig V-Core 4 400.json" - }, - { - "name": "RatRig V-Core 4 500", - "sub_path": "machine/RatRig V-Core 4 500.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 300", - "sub_path": "machine/RatRig V-Core 4 HYBRID 300.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 400", - "sub_path": "machine/RatRig V-Core 4 HYBRID 400.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 500", - "sub_path": "machine/RatRig V-Core 4 HYBRID 500.json" - } - ], - "process_list": [ - { - "name": "fdm_process_common", - "sub_path": "process/fdm_process_common.json" - }, - { - "name": "fdm_process_RatRig_common", - "sub_path": "process/fdm_process_ratrig_common.json" - }, - { - "name": "0.08mm Extra Fine @RatRig", - "sub_path": "process/0.08mm Extra Fine @RatRig.json" - }, - { - "name": "0.12mm Fine @RatRig", - "sub_path": "process/0.12mm Fine @RatRig.json" - }, - { - "name": "0.15mm Optimal @RatRig", - "sub_path": "process/0.15mm Optimal @RatRig.json" - }, - { - "name": "0.20mm Standard @RatRig", - "sub_path": "process/0.20mm Standard @RatRig.json" - }, - { - "name": "0.24mm Draft @RatRig", - "sub_path": "process/0.24mm Draft @RatRig.json" - }, - { - "name": "0.28mm Extra Draft @RatRig", - "sub_path": "process/0.28mm Extra Draft @RatRig.json" - }, - { - "name": "0.30mm Big @RatRig V-Core 4 0.6", - "sub_path": "process/0.30mm Big @RatRig V-Core 4 0.6.json" - }, - { - "name": "0.25mm Speed @RatRig V-Core 4 0.4", - "sub_path": "process/0.25mm Speed @RatRig V-Core 4 0.4.json" - }, - { - "name": "0.25mm Speed @RatRig V-Core 4 0.5", - "sub_path": "process/0.25mm Speed @RatRig V-Core 4 0.5.json" - }, - { - "name": "0.25mm Speed @RatRig V-Core 4 0.6", - "sub_path": "process/0.25mm Speed @RatRig V-Core 4 0.6.json" - }, - { - "name": "0.25mm Quality Speed @RatRig V-Core 4 0.4", - "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 0.4.json" - }, - { - "name": "0.25mm Quality Speed @RatRig V-Core 4 0.5", - "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 0.5.json" - }, - { - "name": "0.35mm Extra Big @RatRig V-Core 4 HYBRID 0.8", - "sub_path": "process/0.35mm Extra Big @RatRig V-Core 4 HYBRID 0.8.json" - }, - { - "name": "0.30mm Big @RatRig V-Core 4 HYBRID 0.8", - "sub_path": "process/0.30mm Big @RatRig V-Core 4 HYBRID 0.8.json" - }, - { - "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.8", - "sub_path": "process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.8.json" - }, - { - "name": "0.25mm Quality Speed @RatRig V-Core 4 0.6", - "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 0.6.json" - }, - { - "name": "0.20mm Quality @RatRig V-Core 4 0.4", - "sub_path": "process/0.20mm Quality @RatRig V-Core 4 0.4.json" - }, - { - "name": "0.20mm Quality @RatRig V-Core 4 0.5", - "sub_path": "process/0.20mm Quality @RatRig V-Core 4 0.5.json" - }, - { - "name": "0.30mm Big @RatRig V-Core 4 HYBRID 0.6", - "sub_path": "process/0.30mm Big @RatRig V-Core 4 HYBRID 0.6.json" - }, - { - "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.4", - "sub_path": "process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.4.json" - }, - { - "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.5", - "sub_path": "process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.5.json" - }, - { - "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.6", - "sub_path": "process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.6.json" - }, - { - "name": "0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4", - "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4.json" - }, - { - "name": "0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.5", - "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.5.json" - }, - { - "name": "0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.6", - "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.6.json" - }, - { - "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.4", - "sub_path": "process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.4.json" - }, - { - "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.5", - "sub_path": "process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.5.json" - } - ], - "filament_list": [ - { - "name": "fdm_filament_common", - "sub_path": "filament/fdm_filament_common.json" - }, - { - "name": "fdm_filament_pla", - "sub_path": "filament/fdm_filament_pla.json" - }, - { - "name": "fdm_filament_tpu", - "sub_path": "filament/fdm_filament_tpu.json" - }, - { - "name": "fdm_filament_pet", - "sub_path": "filament/fdm_filament_pet.json" - }, - { - "name": "fdm_filament_abs", - "sub_path": "filament/fdm_filament_abs.json" - }, - { - "name": "fdm_filament_pc", - "sub_path": "filament/fdm_filament_pc.json" - }, - { - "name": "fdm_filament_asa", - "sub_path": "filament/fdm_filament_asa.json" - }, - { - "name": "fdm_filament_pva", - "sub_path": "filament/fdm_filament_pva.json" - }, - { - "name": "fdm_filament_pa", - "sub_path": "filament/fdm_filament_pa.json" - }, - { - "name": "RatRig Generic PLA", - "sub_path": "filament/RatRig Generic PLA.json" - }, - { - "name": "RatRig Generic PLA-CF", - "sub_path": "filament/RatRig Generic PLA-CF.json" - }, - { - "name": "RatRig Generic PCTG", - "sub_path": "filament/RatRig Generic PCTG.json" - }, - { - "name": "RatRig Generic PETG", - "sub_path": "filament/RatRig Generic PETG.json" - }, - { - "name": "RatRig Generic ABS", - "sub_path": "filament/RatRig Generic ABS.json" - }, - { - "name": "RatRig Generic TPU", - "sub_path": "filament/RatRig Generic TPU.json" - }, - { - "name": "RatRig Generic ASA", - "sub_path": "filament/RatRig Generic ASA.json" - }, - { - "name": "RatRig Generic PC", - "sub_path": "filament/RatRig Generic PC.json" - }, - { - "name": "RatRig Generic PVA", - "sub_path": "filament/RatRig Generic PVA.json" - }, - { - "name": "RatRig Generic PA", - "sub_path": "filament/RatRig Generic PA.json" - }, - { - "name": "RatRig Generic PA-CF", - "sub_path": "filament/RatRig Generic PA-CF.json" - }, - { - "name": "RatRig PunkFil ABS", - "sub_path": "filament/RatRig PunkFil ABS.json" - }, - { - "name": "RatRig PunkFil PETG CF", - "sub_path": "filament/RatRig PunkFil PETG CF.json" - }, - { - "name": "RatRig PunkFil PETG", - "sub_path": "filament/RatRig PunkFil PETG.json" - }, - { - "name": "RatRig BigNozzle ABS", - "sub_path": "filament/RatRig BigNozzle ABS.json" - }, - { - "name": "RatRig BigNozzle ASA", - "sub_path": "filament/RatRig BigNozzle ASA.json" - }, - { - "name": "RatRig BigNozzle PLA", - "sub_path": "filament/RatRig BigNozzle PLA.json" - }, - { - "name": "RatRig BigNozzle PETG", - "sub_path": "filament/RatRig BigNozzle PETG.json" - }, - { - "name": "RatRig BigNozzle PCTG", - "sub_path": "filament/RatRig BigNozzle PCTG.json" - } - ], - "machine_list": [ - { - "name": "fdm_machine_common", - "sub_path": "machine/fdm_machine_common.json" - }, - { - "name": "fdm_klipper_common", - "sub_path": "machine/fdm_klipper_common.json" - }, - { - "name": "RatRig V-Core 3 200 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 3 200 0.4 nozzle.json" - }, - { - "name": "RatRig V-Core 3 300 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 3 300 0.4 nozzle.json" - }, - { - "name": "RatRig V-Core 3 400 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 3 400 0.4 nozzle.json" - }, - { - "name": "RatRig V-Core 3 500 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 3 500 0.4 nozzle.json" - }, - { - "name": "RatRig V-Minion 0.4 nozzle", - "sub_path": "machine/RatRig V-Minion 0.4 nozzle.json" - }, - { - "name": "RatRig V-Cast 0.4 nozzle", - "sub_path": "machine/RatRig V-Cast 0.4 nozzle.json" - }, - { - "name": "RatRig V-Cast 0.6 nozzle", - "sub_path": "machine/RatRig V-Cast 0.6 nozzle.json" - }, - { - "name": "RatRig V-Core 4 300 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 4 300 0.4 nozzle.json" - }, - { - "name": "RatRig V-Core 4 300 0.5 nozzle", - "sub_path": "machine/RatRig V-Core 4 300 0.5 nozzle.json" - }, - { - "name": "RatRig V-Core 4 300 0.6 nozzle", - "sub_path": "machine/RatRig V-Core 4 300 0.6 nozzle.json" - }, - { - "name": "RatRig V-Core 4 400 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 4 400 0.4 nozzle.json" - }, - { - "name": "RatRig V-Core 4 400 0.5 nozzle", - "sub_path": "machine/RatRig V-Core 4 400 0.5 nozzle.json" - }, - { - "name": "RatRig V-Core 4 400 0.6 nozzle", - "sub_path": "machine/RatRig V-Core 4 400 0.6 nozzle.json" - }, - { - "name": "RatRig V-Core 4 500 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 4 500 0.4 nozzle.json" - }, - { - "name": "RatRig V-Core 4 500 0.5 nozzle", - "sub_path": "machine/RatRig V-Core 4 500 0.5 nozzle.json" - }, - { - "name": "RatRig V-Core 4 500 0.6 nozzle", - "sub_path": "machine/RatRig V-Core 4 500 0.6 nozzle.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 300 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 4 HYBRID 300 0.4 nozzle.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 300 0.5 nozzle", - "sub_path": "machine/RatRig V-Core 4 HYBRID 300 0.5 nozzle.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 300 0.6 nozzle", - "sub_path": "machine/RatRig V-Core 4 HYBRID 300 0.6 nozzle.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 400 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 4 HYBRID 400 0.4 nozzle.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 400 0.5 nozzle", - "sub_path": "machine/RatRig V-Core 4 HYBRID 400 0.5 nozzle.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 400 0.6 nozzle", - "sub_path": "machine/RatRig V-Core 4 HYBRID 400 0.6 nozzle.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 500 0.4 nozzle", - "sub_path": "machine/RatRig V-Core 4 HYBRID 500 0.4 nozzle.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 500 0.5 nozzle", - "sub_path": "machine/RatRig V-Core 4 HYBRID 500 0.5 nozzle.json" - }, - { - "name": "RatRig V-Core 4 HYBRID 500 0.6 nozzle", - "sub_path": "machine/RatRig V-Core 4 HYBRID 500 0.6 nozzle.json" - } - ] -} +{ + "name": "RatRig", + "version": "02.03.00.01", + "force_update": "0", + "description": "RatRig configurations", + "machine_model_list": [ + { + "name": "RatRig V-Core 3 200", + "sub_path": "machine/RatRig V-Core 3 200.json" + }, + { + "name": "RatRig V-Core 3 300", + "sub_path": "machine/RatRig V-Core 3 300.json" + }, + { + "name": "RatRig V-Core 3 400", + "sub_path": "machine/RatRig V-Core 3 400.json" + }, + { + "name": "RatRig V-Core 3 500", + "sub_path": "machine/RatRig V-Core 3 500.json" + }, + { + "name": "RatRig V-Minion", + "sub_path": "machine/RatRig V-Minion.json" + }, + { + "name": "RatRig V-Cast", + "sub_path": "machine/RatRig V-Cast.json" + }, + { + "name": "RatRig V-Core 4 300", + "sub_path": "machine/RatRig V-Core 4 300.json" + }, + { + "name": "RatRig V-Core 4 400", + "sub_path": "machine/RatRig V-Core 4 400.json" + }, + { + "name": "RatRig V-Core 4 500", + "sub_path": "machine/RatRig V-Core 4 500.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 300", + "sub_path": "machine/RatRig V-Core 4 HYBRID 300.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 400", + "sub_path": "machine/RatRig V-Core 4 HYBRID 400.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 500", + "sub_path": "machine/RatRig V-Core 4 HYBRID 500.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300", + "sub_path": "machine/RatRig V-Core 4 IDEX 300.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 COPY MODE", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 COPY MODE.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400", + "sub_path": "machine/RatRig V-Core 4 IDEX 400.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 COPY MODE", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 COPY MODE.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500", + "sub_path": "machine/RatRig V-Core 4 IDEX 500.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 COPY MODE", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 COPY MODE.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json" + } + ], + "process_list": [ + { + "name": "fdm_process_common", + "sub_path": "process/fdm_process_common.json" + }, + { + "name": "fdm_process_RatRig_common", + "sub_path": "process/fdm_process_ratrig_common.json" + }, + { + "name": "fdm_process_RatRig_idex", + "sub_path": "process/fdm_process_ratrig_idex.json" + }, + { + "name": "0.08mm Extra Fine @RatRig", + "sub_path": "process/0.08mm Extra Fine @RatRig.json" + }, + { + "name": "0.12mm Fine @RatRig", + "sub_path": "process/0.12mm Fine @RatRig.json" + }, + { + "name": "0.15mm Optimal @RatRig", + "sub_path": "process/0.15mm Optimal @RatRig.json" + }, + { + "name": "0.20mm Standard @RatRig", + "sub_path": "process/0.20mm Standard @RatRig.json" + }, + { + "name": "0.24mm Draft @RatRig", + "sub_path": "process/0.24mm Draft @RatRig.json" + }, + { + "name": "0.28mm Extra Draft @RatRig", + "sub_path": "process/0.28mm Extra Draft @RatRig.json" + }, + { + "name": "0.30mm Big @RatRig V-Core 4 0.6", + "sub_path": "process/0.30mm Big @RatRig V-Core 4 0.6.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 0.4", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 0.4.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 0.5", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 0.5.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 0.6", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 0.6.json" + }, + { + "name": "0.25mm Quality Speed @RatRig V-Core 4 0.4", + "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 0.4.json" + }, + { + "name": "0.25mm Quality Speed @RatRig V-Core 4 0.5", + "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 0.5.json" + }, + { + "name": "0.25mm Quality Speed @RatRig V-Core 4 0.6", + "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 0.6.json" + }, + { + "name": "0.20mm Quality @RatRig V-Core 4 0.4", + "sub_path": "process/0.20mm Quality @RatRig V-Core 4 0.4.json" + }, + { + "name": "0.20mm Quality @RatRig V-Core 4 0.5", + "sub_path": "process/0.20mm Quality @RatRig V-Core 4 0.5.json" + }, + { + "name": "0.35mm Extra Big @RatRig V-Core 4 HYBRID 0.8", + "sub_path": "process/0.35mm Extra Big @RatRig V-Core 4 HYBRID 0.8.json" + }, + { + "name": "0.30mm Big @RatRig V-Core 4 HYBRID 0.8", + "sub_path": "process/0.30mm Big @RatRig V-Core 4 HYBRID 0.8.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.8", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.8.json" + }, + { + "name": "0.30mm Big @RatRig V-Core 4 HYBRID 0.6", + "sub_path": "process/0.30mm Big @RatRig V-Core 4 HYBRID 0.6.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.4", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.4.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.5", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.5.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.6", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.6.json" + }, + { + "name": "0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4", + "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4.json" + }, + { + "name": "0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.5", + "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.5.json" + }, + { + "name": "0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.6", + "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.6.json" + }, + { + "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.4", + "sub_path": "process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.4.json" + }, + { + "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.5", + "sub_path": "process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.5.json" + }, + { + "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.6", + "sub_path": "process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.6.json" + }, + { + "name": "0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.4", + "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.4.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 IDEX 0.4", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 IDEX 0.4.json" + }, + { + "name": "0.20mm Quality @RatRig V-Core 4 IDEX 0.4", + "sub_path": "process/0.20mm Quality @RatRig V-Core 4 IDEX 0.4.json" + }, + { + "name": "0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.5", + "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.5.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 IDEX 0.5", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 IDEX 0.5.json" + }, + { + "name": "0.20mm Quality @RatRig V-Core 4 IDEX 0.5", + "sub_path": "process/0.20mm Quality @RatRig V-Core 4 IDEX 0.5.json" + }, + { + "name": "0.20mm Quality @RatRig V-Core 4 IDEX 0.6", + "sub_path": "process/0.20mm Quality @RatRig V-Core 4 IDEX 0.6.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 IDEX 0.6", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 IDEX 0.6.json" + }, + { + "name": "0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.6", + "sub_path": "process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.6.json" + }, + { + "name": "0.30mm Big @RatRig V-Core 4 IDEX 0.6", + "sub_path": "process/0.30mm Big @RatRig V-Core 4 IDEX 0.6.json" + }, + { + "name": "0.35mm Extra Big @RatRig V-Core 4 IDEX 0.8", + "sub_path": "process/0.35mm Extra Big @RatRig V-Core 4 IDEX 0.8.json" + }, + { + "name": "0.30mm Big @RatRig V-Core 4 IDEX 0.8", + "sub_path": "process/0.30mm Big @RatRig V-Core 4 IDEX 0.8.json" + }, + { + "name": "0.25mm Speed @RatRig V-Core 4 IDEX 0.8", + "sub_path": "process/0.25mm Speed @RatRig V-Core 4 IDEX 0.8.json" + } + + ], + "filament_list": [ + { + "name": "fdm_filament_common", + "sub_path": "filament/fdm_filament_common.json" + }, + { + "name": "fdm_filament_pla", + "sub_path": "filament/fdm_filament_pla.json" + }, + { + "name": "fdm_filament_tpu", + "sub_path": "filament/fdm_filament_tpu.json" + }, + { + "name": "fdm_filament_pet", + "sub_path": "filament/fdm_filament_pet.json" + }, + { + "name": "fdm_filament_abs", + "sub_path": "filament/fdm_filament_abs.json" + }, + { + "name": "fdm_filament_pc", + "sub_path": "filament/fdm_filament_pc.json" + }, + { + "name": "fdm_filament_asa", + "sub_path": "filament/fdm_filament_asa.json" + }, + { + "name": "fdm_filament_pva", + "sub_path": "filament/fdm_filament_pva.json" + }, + { + "name": "fdm_filament_pa", + "sub_path": "filament/fdm_filament_pa.json" + }, + { + "name": "RatRig Generic PLA", + "sub_path": "filament/RatRig Generic PLA.json" + }, + { + "name": "RatRig Generic PLA-CF", + "sub_path": "filament/RatRig Generic PLA-CF.json" + }, + { + "name": "RatRig Generic PCTG", + "sub_path": "filament/RatRig Generic PCTG.json" + }, + { + "name": "RatRig Generic PETG", + "sub_path": "filament/RatRig Generic PETG.json" + }, + { + "name": "RatRig Generic ABS", + "sub_path": "filament/RatRig Generic ABS.json" + }, + { + "name": "RatRig Generic TPU", + "sub_path": "filament/RatRig Generic TPU.json" + }, + { + "name": "RatRig Generic ASA", + "sub_path": "filament/RatRig Generic ASA.json" + }, + { + "name": "RatRig Generic PC", + "sub_path": "filament/RatRig Generic PC.json" + }, + { + "name": "RatRig Generic PVA", + "sub_path": "filament/RatRig Generic PVA.json" + }, + { + "name": "RatRig Generic PA", + "sub_path": "filament/RatRig Generic PA.json" + }, + { + "name": "RatRig Generic PA-CF", + "sub_path": "filament/RatRig Generic PA-CF.json" + }, + { + "name": "RatRig PunkFil ABS", + "sub_path": "filament/RatRig PunkFil ABS.json" + }, + { + "name": "RatRig PunkFil PETG CF", + "sub_path": "filament/RatRig PunkFil PETG CF.json" + }, + { + "name": "RatRig PunkFil PETG", + "sub_path": "filament/RatRig PunkFil PETG.json" + }, + { + "name": "RatRig BigNozzle ABS", + "sub_path": "filament/RatRig BigNozzle ABS.json" + }, + { + "name": "RatRig BigNozzle ASA", + "sub_path": "filament/RatRig BigNozzle ASA.json" + }, + { + "name": "RatRig BigNozzle PLA", + "sub_path": "filament/RatRig BigNozzle PLA.json" + }, + { + "name": "RatRig BigNozzle PETG", + "sub_path": "filament/RatRig BigNozzle PETG.json" + }, + { + "name": "RatRig BigNozzle PCTG", + "sub_path": "filament/RatRig BigNozzle PCTG.json" + }, + { + "name": "RatRig BigNozzle TPU", + "sub_path": "filament/RatRig BigNozzle TPU.json" + } + ], + "machine_list": [ + { + "name": "fdm_machine_common", + "sub_path": "machine/fdm_machine_common.json" + }, + { + "name": "fdm_klipper_common", + "sub_path": "machine/fdm_klipper_common.json" + }, + { + "name": "RatRig V-Core 3 200 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 3 200 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 3 300 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 3 300 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 3 400 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 3 400 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 3 500 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 3 500 0.4 nozzle.json" + }, + { + "name": "RatRig V-Minion 0.4 nozzle", + "sub_path": "machine/RatRig V-Minion 0.4 nozzle.json" + }, + { + "name": "RatRig V-Cast 0.4 nozzle", + "sub_path": "machine/RatRig V-Cast 0.4 nozzle.json" + }, + { + "name": "RatRig V-Cast 0.6 nozzle", + "sub_path": "machine/RatRig V-Cast 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 300 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 300 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 300 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 300 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 300 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 300 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 400 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 400 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 400 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 400 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 400 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 400 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 400 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 400 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 500 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 500 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 500 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 500 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 500 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 500 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 300 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 300 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 300 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 300 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 300 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 300 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 400 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 400 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 400 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 400 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 400 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 400 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 400 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 400 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 500 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 500 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 500 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 500 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 HYBRID 500 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 HYBRID 500 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle.json" + }, + { + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle", + "sub_path": "machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle.json" + } + ] +} diff --git a/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 300 COPY MODE_cover.png b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 300 COPY MODE_cover.png new file mode 100644 index 00000000000..c7bf8b01f75 Binary files /dev/null and b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 300 COPY MODE_cover.png differ diff --git a/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 300 MIRROR MODE_cover.png b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 300 MIRROR MODE_cover.png new file mode 100644 index 00000000000..c7bf8b01f75 Binary files /dev/null and b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 300 MIRROR MODE_cover.png differ diff --git a/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 300_cover.png b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 300_cover.png new file mode 100644 index 00000000000..c7bf8b01f75 Binary files /dev/null and b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 300_cover.png differ diff --git a/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 400 COPY MODE_cover.png b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 400 COPY MODE_cover.png new file mode 100644 index 00000000000..c7bf8b01f75 Binary files /dev/null and b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 400 COPY MODE_cover.png differ diff --git a/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 400 MIRROR MODE_cover.png b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 400 MIRROR MODE_cover.png new file mode 100644 index 00000000000..c7bf8b01f75 Binary files /dev/null and b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 400 MIRROR MODE_cover.png differ diff --git a/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 400_cover.png b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 400_cover.png new file mode 100644 index 00000000000..c7bf8b01f75 Binary files /dev/null and b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 400_cover.png differ diff --git a/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 500 COPY MODE_cover.png b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 500 COPY MODE_cover.png new file mode 100644 index 00000000000..c7bf8b01f75 Binary files /dev/null and b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 500 COPY MODE_cover.png differ diff --git a/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 500 MIRROR MODE_cover.png b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 500 MIRROR MODE_cover.png new file mode 100644 index 00000000000..c7bf8b01f75 Binary files /dev/null and b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 500 MIRROR MODE_cover.png differ diff --git a/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 500_cover.png b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 500_cover.png new file mode 100644 index 00000000000..c7bf8b01f75 Binary files /dev/null and b/resources/profiles/Ratrig/RatRig V-Core 4 IDEX 500_cover.png differ diff --git a/resources/profiles/Ratrig/filament/RatRig BigNozzle ABS.json b/resources/profiles/Ratrig/filament/RatRig BigNozzle ABS.json index 318eb4a1f3f..d0c7f83c914 100644 --- a/resources/profiles/Ratrig/filament/RatRig BigNozzle ABS.json +++ b/resources/profiles/Ratrig/filament/RatRig BigNozzle ABS.json @@ -7,7 +7,7 @@ "instantiation": "true", "inherits": "fdm_filament_abs", "filament_flow_ratio": [ - "0.98" + "0.94" ], "filament_max_volumetric_speed": [ "18" diff --git a/resources/profiles/Ratrig/filament/RatRig BigNozzle ASA.json b/resources/profiles/Ratrig/filament/RatRig BigNozzle ASA.json index 87c1ead4d42..dce9848f2d1 100644 --- a/resources/profiles/Ratrig/filament/RatRig BigNozzle ASA.json +++ b/resources/profiles/Ratrig/filament/RatRig BigNozzle ASA.json @@ -7,7 +7,7 @@ "instantiation": "true", "inherits": "fdm_filament_asa", "filament_flow_ratio": [ - "0.98" + "0.92" ], "filament_max_volumetric_speed": [ "19" diff --git a/resources/profiles/Ratrig/filament/RatRig BigNozzle PCTG.json b/resources/profiles/Ratrig/filament/RatRig BigNozzle PCTG.json index 48728018c81..83cbc7b8457 100644 --- a/resources/profiles/Ratrig/filament/RatRig BigNozzle PCTG.json +++ b/resources/profiles/Ratrig/filament/RatRig BigNozzle PCTG.json @@ -34,7 +34,7 @@ "8" ], "filament_flow_ratio": [ - "0.96" + "0.92" ], "filament_density": [ "1.29" diff --git a/resources/profiles/Ratrig/filament/RatRig BigNozzle PETG.json b/resources/profiles/Ratrig/filament/RatRig BigNozzle PETG.json index 6c42d5533dc..bca2e50ba06 100644 --- a/resources/profiles/Ratrig/filament/RatRig BigNozzle PETG.json +++ b/resources/profiles/Ratrig/filament/RatRig BigNozzle PETG.json @@ -34,7 +34,7 @@ "8" ], "filament_flow_ratio": [ - "0.98" + "0.92" ], "filament_max_volumetric_speed": [ "12" diff --git a/resources/profiles/Ratrig/filament/RatRig BigNozzle PLA.json b/resources/profiles/Ratrig/filament/RatRig BigNozzle PLA.json index 5f426a270ae..e58cd4f1ba0 100644 --- a/resources/profiles/Ratrig/filament/RatRig BigNozzle PLA.json +++ b/resources/profiles/Ratrig/filament/RatRig BigNozzle PLA.json @@ -7,7 +7,7 @@ "instantiation": "true", "inherits": "fdm_filament_pla", "filament_flow_ratio": [ - "0.98" + "0.94" ], "filament_max_volumetric_speed": [ "20" diff --git a/resources/profiles/Ratrig/filament/RatRig BigNozzle TPU.json b/resources/profiles/Ratrig/filament/RatRig BigNozzle TPU.json new file mode 100644 index 00000000000..21dbd9141e3 --- /dev/null +++ b/resources/profiles/Ratrig/filament/RatRig BigNozzle TPU.json @@ -0,0 +1,33 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSA04", + "name": "RatRig BigNozzle TPU", + "from": "system", + "instantiation": "true", + "inherits": "fdm_filament_tpu", + "filament_max_volumetric_speed": [ + "5" + ], + "filament_z_hop": [ + "0" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.1" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ] +} diff --git a/resources/profiles/Ratrig/filament/RatRig Generic PCTG.json b/resources/profiles/Ratrig/filament/RatRig Generic PCTG.json index bf85ee98d31..d444faf7244 100644 --- a/resources/profiles/Ratrig/filament/RatRig Generic PCTG.json +++ b/resources/profiles/Ratrig/filament/RatRig Generic PCTG.json @@ -34,7 +34,7 @@ "8" ], "filament_flow_ratio": [ - "0.94" + "0.93" ], "filament_density": [ "1.29" @@ -52,7 +52,7 @@ "0.045" ], "nozzle_temperature_initial_layer": [ - "255" + "260" ], "nozzle_temperature": [ "255" diff --git a/resources/profiles/Ratrig/machine/RatRig V-Cast 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Cast 0.4 nozzle.json index 94a8a708d8a..7331a1e04cc 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Cast 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Cast 0.4 nozzle.json @@ -1,19 +1,19 @@ -{ - "type": "machine", - "setting_id": "GM006", - "name": "RatRig V-Cast 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Cast", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "300x0", - "300x300", - "0x300" - ], - "printable_height": "250" -} +{ + "type": "machine", + "setting_id": "GM006", + "name": "RatRig V-Cast 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Cast", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "250" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Cast 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Cast 0.6 nozzle.json index d3a74e9c750..c02b7bc7638 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Cast 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Cast 0.6 nozzle.json @@ -1,20 +1,20 @@ -{ - "type": "machine", - "setting_id": "GM007", - "name": "RatRig V-Cast 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "RatRig V-Cast 0.4 nozzle", - "printer_model": "RatRig V-Cast", - "nozzle_diameter": [ - "0.6" - ], - "printer_variant": "0.6", - "printable_area": [ - "0x0", - "300x0", - "300x300", - "0x300" - ], - "printable_height": "250" -} +{ + "type": "machine", + "setting_id": "GM007", + "name": "RatRig V-Cast 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "RatRig V-Cast 0.4 nozzle", + "printer_model": "RatRig V-Cast", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "250" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Cast.json b/resources/profiles/Ratrig/machine/RatRig V-Cast.json index 19f2cf1d4d3..6e1d0bf1851 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Cast.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Cast.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Cast", - "model_id": "V-Cast", - "nozzle_diameter": "0.4;0.6", - "machine_tech": "FFF", - "family": "RatRig_V-Cast", - "bed_model": "ratrig-vcast-bed.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Cast", + "model_id": "V-Cast", + "nozzle_diameter": "0.4;0.6", + "machine_tech": "FFF", + "family": "RatRig_V-Cast", + "bed_model": "ratrig-vcast-bed.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 3 200 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 3 200 0.4 nozzle.json index cced57d7585..9b9213186ea 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 3 200 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 3 200 0.4 nozzle.json @@ -1,19 +1,19 @@ -{ - "type": "machine", - "setting_id": "GM001", - "name": "RatRig V-Core 3 200 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 3 200", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "200x0", - "200x200", - "0x200" - ], - "printable_height": "200" -} +{ + "type": "machine", + "setting_id": "GM001", + "name": "RatRig V-Core 3 200 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 3 200", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "200x0", + "200x200", + "0x200" + ], + "printable_height": "200" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 3 200.json b/resources/profiles/Ratrig/machine/RatRig V-Core 3 200.json index 17d7e3fafcb..d5c022965c3 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 3 200.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 3 200.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 3 200", - "model_id": "V-Core_3_200", - "nozzle_diameter": "0.4", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-200.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 3 200", + "model_id": "V-Core_3_200", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-200.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 3 300 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 3 300 0.4 nozzle.json index ee108e9198b..faf393a56d6 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 3 300 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 3 300 0.4 nozzle.json @@ -1,19 +1,19 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 3 300 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 3 300", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "300x0", - "300x300", - "0x300" - ], - "printable_height": "300" -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 3 300 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 3 300", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "300" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 3 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 3 300.json index 4f37d4178d2..5c8af15b7a5 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 3 300.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 3 300.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 3 300", - "model_id": "V-Core_3_300", - "nozzle_diameter": "0.4", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-300.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 3 300", + "model_id": "V-Core_3_300", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-300.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 3 400 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 3 400 0.4 nozzle.json index 031bd23f533..0919e492034 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 3 400 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 3 400 0.4 nozzle.json @@ -1,19 +1,19 @@ -{ - "type": "machine", - "setting_id": "GM003", - "name": "RatRig V-Core 3 400 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 3 400", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "400x0", - "400x400", - "0x400" - ], - "printable_height": "400" -} +{ + "type": "machine", + "setting_id": "GM003", + "name": "RatRig V-Core 3 400 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 3 400", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "printable_height": "400" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 3 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 3 400.json index 40b9e6713c3..7fbf6a4ca26 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 3 400.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 3 400.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 3 400", - "model_id": "V-Core_3_400", - "nozzle_diameter": "0.4", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-400.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 3 400", + "model_id": "V-Core_3_400", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-400.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 3 500 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 3 500 0.4 nozzle.json index 8e13cf4a437..d3621471bc5 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 3 500 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 3 500 0.4 nozzle.json @@ -1,19 +1,19 @@ -{ - "type": "machine", - "setting_id": "GM004", - "name": "RatRig V-Core 3 500 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 3 500", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "500x0", - "500x500", - "0x500" - ], - "printable_height": "500" -} +{ + "type": "machine", + "setting_id": "GM004", + "name": "RatRig V-Core 3 500 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 3 500", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "printable_height": "500" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 3 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 3 500.json index 442842b08f9..fe34672ac45 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 3 500.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 3 500.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 3 500", - "model_id": "V-Core_3_500", - "nozzle_diameter": "0.4", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-500.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 3 500", + "model_id": "V-Core_3_500", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-500.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.4 nozzle.json index 9aa5e17c45c..d5d798be48c 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.4 nozzle.json @@ -1,57 +1,57 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 300 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 300", - "printer_variant": "0.4", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "300x0", - "300x300", - "0x300" - ], - "machine_max_speed_x": ["400", "400"], - "machine_max_speed_y": ["400", "400"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["10000", "10000"], - "machine_max_acceleration_y": ["10000", "10000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["10000", "10000"], - "machine_max_acceleration_retracting": ["10000", "10000"], - "machine_max_acceleration_travel": ["10000", "10000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.06"], - "max_layer_height": ["0.3"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 300 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 300", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.5 nozzle.json index 4a69198bb7e..f5e82079b45 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.5 nozzle.json @@ -1,57 +1,57 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 300 0.5 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 300", - "printer_variant": "0.5", - "nozzle_diameter": [ - "0.5" - ], - "printable_area": [ - "0x0", - "300x0", - "300x300", - "0x300" - ], - "machine_max_speed_x": ["400", "400"], - "machine_max_speed_y": ["400", "400"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["10000", "10000"], - "machine_max_acceleration_y": ["10000", "10000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["10000", "10000"], - "machine_max_acceleration_retracting": ["10000", "10000"], - "machine_max_acceleration_travel": ["10000", "10000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.07"], - "max_layer_height": ["0.32"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 300 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 300", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.07"], + "max_layer_height": ["0.32"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.6 nozzle.json index bf8af7c54b0..a91b673763a 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.6 nozzle.json @@ -1,57 +1,57 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 300 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 300", - "printer_variant": "0.6", - "nozzle_diameter": [ - "0.6" - ], - "printable_area": [ - "0x0", - "300x0", - "300x300", - "0x300" - ], - "machine_max_speed_x": ["400", "400"], - "machine_max_speed_y": ["400", "400"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["10000", "10000"], - "machine_max_acceleration_y": ["10000", "10000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["10000", "10000"], - "machine_max_acceleration_retracting": ["10000", "10000"], - "machine_max_acceleration_travel": ["10000", "10000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.1"], - "max_layer_height": ["0.4"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.3"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 300 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 300", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.1"], + "max_layer_height": ["0.4"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json new file mode 100644 index 00000000000..e567d68d97f --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json @@ -0,0 +1,57 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 300 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 300", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.12"], + "max_layer_height": ["0.5"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.4"], + "retraction_length": ["3"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json index fbe06996478..2dbe8af6f64 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 4 300", - "model_id": "V-Core_4_300", - "nozzle_diameter": "0.4;0.5;0.6", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-300.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 4 300", + "model_id": "V-Core_4_300", + "nozzle_diameter": "0.4;0.5;0.6", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-300.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.4 nozzle.json index f95218ddb2d..a03920b7d80 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.4 nozzle.json @@ -1,57 +1,57 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 400 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 400", - "printer_variant": "0.4", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "400x0", - "400x400", - "0x400" - ], - "machine_max_speed_x": ["400", "400"], - "machine_max_speed_y": ["400", "400"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["10000", "10000"], - "machine_max_acceleration_y": ["10000", "10000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["10000", "10000"], - "machine_max_acceleration_retracting": ["10000", "10000"], - "machine_max_acceleration_travel": ["10000", "10000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.06"], - "max_layer_height": ["0.3"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 400 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 400", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.5 nozzle.json index 7a69713f1b4..f461e6293ad 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.5 nozzle.json @@ -1,57 +1,57 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 400 0.5 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 400", - "printer_variant": "0.5", - "nozzle_diameter": [ - "0.5" - ], - "printable_area": [ - "0x0", - "400x0", - "400x400", - "0x400" - ], - "machine_max_speed_x": ["400", "400"], - "machine_max_speed_y": ["400", "400"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["10000", "10000"], - "machine_max_acceleration_y": ["10000", "10000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["10000", "10000"], - "machine_max_acceleration_retracting": ["10000", "10000"], - "machine_max_acceleration_travel": ["10000", "10000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.07"], - "max_layer_height": ["0.32"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 400 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 400", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.07"], + "max_layer_height": ["0.32"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.6 nozzle.json index 8a2c557b01c..5ecc638685b 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.6 nozzle.json @@ -1,57 +1,57 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 400 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 400", - "printer_variant": "0.6", - "nozzle_diameter": [ - "0.6" - ], - "printable_area": [ - "0x0", - "400x0", - "400x400", - "0x400" - ], - "machine_max_speed_x": ["400", "400"], - "machine_max_speed_y": ["400", "400"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["10000", "10000"], - "machine_max_acceleration_y": ["10000", "10000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["10000", "10000"], - "machine_max_acceleration_retracting": ["10000", "10000"], - "machine_max_acceleration_travel": ["10000", "10000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.1"], - "max_layer_height": ["0.4"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.3"], - "retraction_length": ["2"], - "retraction_speed": ["40"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 400 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 400", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.1"], + "max_layer_height": ["0.4"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["2"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json new file mode 100644 index 00000000000..cf1623811c1 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json @@ -0,0 +1,57 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 400 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 400", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.12"], + "max_layer_height": ["0.5"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.4"], + "retraction_length": ["3"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json index a3f9c85191a..50d81cd4643 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 4 400", - "model_id": "V-Core_4_400", - "nozzle_diameter": "0.4;0.5;0.6", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-400.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 4 400", + "model_id": "V-Core_4_400", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-400.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.4 nozzle.json index d89467a3b42..6bdb9d9cd24 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.4 nozzle.json @@ -1,57 +1,57 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 500 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 500", - "printer_variant": "0.4", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "500x0", - "500x500", - "0x500" - ], - "machine_max_speed_x": ["400", "400"], - "machine_max_speed_y": ["400", "400"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["10000", "10000"], - "machine_max_acceleration_y": ["10000", "10000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["10000", "10000"], - "machine_max_acceleration_retracting": ["10000", "10000"], - "machine_max_acceleration_travel": ["10000", "10000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.06"], - "max_layer_height": ["0.3"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 500 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 500", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.5 nozzle.json index 96618aa218a..daccbdcc480 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.5 nozzle.json @@ -1,57 +1,57 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 500 0.5 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 500", - "printer_variant": "0.5", - "nozzle_diameter": [ - "0.5" - ], - "printable_area": [ - "0x0", - "500x0", - "500x500", - "0x500" - ], - "machine_max_speed_x": ["400", "400"], - "machine_max_speed_y": ["400", "400"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["10000", "10000"], - "machine_max_acceleration_y": ["10000", "10000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["10000", "10000"], - "machine_max_acceleration_retracting": ["10000", "10000"], - "machine_max_acceleration_travel": ["10000", "10000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.07"], - "max_layer_height": ["0.32"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.25"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 500 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 500", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.07"], + "max_layer_height": ["0.32"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.25"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.6 nozzle.json index adb004f782a..e62fc03f750 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.6 nozzle.json @@ -1,57 +1,57 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 500 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 500", - "printer_variant": "0.6", - "nozzle_diameter": [ - "0.6" - ], - "printable_area": [ - "0x0", - "500x0", - "500x500", - "0x500" - ], - "machine_max_speed_x": ["400", "400"], - "machine_max_speed_y": ["400", "400"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["10000", "10000"], - "machine_max_acceleration_y": ["10000", "10000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["10000", "10000"], - "machine_max_acceleration_retracting": ["10000", "10000"], - "machine_max_acceleration_travel": ["10000", "10000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.1"], - "max_layer_height": ["0.4"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.3"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 500 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 500", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.1"], + "max_layer_height": ["0.4"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json new file mode 100644 index 00000000000..482d4cb46c5 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json @@ -0,0 +1,57 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 500 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 500", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["400", "400"], + "machine_max_speed_y": ["400", "400"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["10000", "10000"], + "machine_max_acceleration_travel": ["10000", "10000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.12"], + "max_layer_height": ["0.5"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.4"], + "retraction_length": ["3"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "thumbnails": [ + "64x64/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json index 2803355533f..a8fb04fbd22 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 4 500", - "model_id": "V-Core_4_500", - "nozzle_diameter": "0.4;0.5;0.6", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-500.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 4 500", + "model_id": "V-Core_4_500", + "nozzle_diameter": "0.4;0.5;0.6", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-500.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.4 nozzle.json index 19592514fd1..ea409204115 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.4 nozzle.json @@ -1,57 +1,59 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 HYBRID 300 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 HYBRID 300", - "printer_variant": "0.4", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "300x0", - "300x300", - "0x300" - ], - "machine_max_speed_x": ["500", "500"], - "machine_max_speed_y": ["500", "500"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["20000", "20000"], - "machine_max_acceleration_y": ["20000", "20000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["20000", "20000"], - "machine_max_acceleration_retracting": ["20000", "20000"], - "machine_max_acceleration_travel": ["20000", "20000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.06"], - "max_layer_height": ["0.3"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 HYBRID 300 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 HYBRID 300", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.5 nozzle.json index 5f3449a306d..81fef7857ac 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.5 nozzle.json @@ -1,57 +1,59 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 HYBRID 300 0.5 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 HYBRID 300", - "printer_variant": "0.5", - "nozzle_diameter": [ - "0.5" - ], - "printable_area": [ - "0x0", - "300x0", - "300x300", - "0x300" - ], - "machine_max_speed_x": ["500", "500"], - "machine_max_speed_y": ["500", "500"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["20000", "20000"], - "machine_max_acceleration_y": ["20000", "20000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["20000", "20000"], - "machine_max_acceleration_retracting": ["20000", "20000"], - "machine_max_acceleration_travel": ["20000", "20000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.07"], - "max_layer_height": ["0.32"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 HYBRID 300 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 HYBRID 300", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.07"], + "max_layer_height": ["0.32"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.6 nozzle.json index 951606077f2..1f8c2b02f8f 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.6 nozzle.json @@ -1,57 +1,59 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 HYBRID 300 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 HYBRID 300", - "printer_variant": "0.6", - "nozzle_diameter": [ - "0.6" - ], - "printable_area": [ - "0x0", - "300x0", - "300x300", - "0x300" - ], - "machine_max_speed_x": ["500", "500"], - "machine_max_speed_y": ["500", "500"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["20000", "20000"], - "machine_max_acceleration_y": ["20000", "20000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["20000", "20000"], - "machine_max_acceleration_retracting": ["20000", "20000"], - "machine_max_acceleration_travel": ["20000", "20000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.1"], - "max_layer_height": ["0.4"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.3"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "300", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 HYBRID 300 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 HYBRID 300", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.1"], + "max_layer_height": ["0.4"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json index d1016f26622..0a37f1dabab 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 4 HYBRID 300", - "model_id": "V-Core_4_HYBRID_300", - "nozzle_diameter": "0.4;0.5;0.6", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-300.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 4 HYBRID 300", + "model_id": "V-Core_4_HYBRID_300", + "nozzle_diameter": "0.4;0.5;0.6", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-300.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.4 nozzle.json index 84f7796e4d7..1e69cfeb7e4 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.4 nozzle.json @@ -1,57 +1,59 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 HYBRID 400 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 HYBRID 400", - "printer_variant": "0.4", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "400x0", - "400x400", - "0x400" - ], - "machine_max_speed_x": ["500", "500"], - "machine_max_speed_y": ["500", "500"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["20000", "20000"], - "machine_max_acceleration_y": ["20000", "20000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["20000", "20000"], - "machine_max_acceleration_retracting": ["20000", "20000"], - "machine_max_acceleration_travel": ["20000", "20000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.06"], - "max_layer_height": ["0.3"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "400", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 HYBRID 400 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 HYBRID 400", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.5 nozzle.json index 9adc92b1e0e..bcee1acdf96 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.5 nozzle.json @@ -1,57 +1,59 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 HYBRID 400 0.5 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 HYBRID 400", - "printer_variant": "0.5", - "nozzle_diameter": [ - "0.5" - ], - "printable_area": [ - "0x0", - "400x0", - "400x400", - "0x400" - ], - "machine_max_speed_x": ["500", "500"], - "machine_max_speed_y": ["500", "500"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["20000", "20000"], - "machine_max_acceleration_y": ["20000", "20000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["20000", "20000"], - "machine_max_acceleration_retracting": ["20000", "20000"], - "machine_max_acceleration_travel": ["20000", "20000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.07"], - "max_layer_height": ["0.32"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "400", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 HYBRID 400 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 HYBRID 400", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.07"], + "max_layer_height": ["0.32"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.6 nozzle.json index 7af4004b0d9..99bb11ef37f 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.6 nozzle.json @@ -1,57 +1,59 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 HYBRID 400 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 HYBRID 400", - "printer_variant": "0.6", - "nozzle_diameter": [ - "0.6" - ], - "printable_area": [ - "0x0", - "400x0", - "400x400", - "0x400" - ], - "machine_max_speed_x": ["500", "500"], - "machine_max_speed_y": ["500", "500"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["20000", "20000"], - "machine_max_acceleration_y": ["20000", "20000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["20000", "20000"], - "machine_max_acceleration_retracting": ["20000", "20000"], - "machine_max_acceleration_travel": ["20000", "20000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.1"], - "max_layer_height": ["0.4"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.3"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "400", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 HYBRID 400 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 HYBRID 400", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.1"], + "max_layer_height": ["0.4"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json index dce309372cd..a918d79bc08 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 4 HYBRID 400", - "model_id": "V-Core_4_HYBRID_400", - "nozzle_diameter": "0.4;0.5;0.6", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-400.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 4 HYBRID 400", + "model_id": "V-Core_4_HYBRID_400", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-400.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.4 nozzle.json index 845752dee6a..4f856ca5b48 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.4 nozzle.json @@ -1,57 +1,59 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 HYBRID 500 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 HYBRID 500", - "printer_variant": "0.4", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "500x0", - "500x500", - "0x500" - ], - "machine_max_speed_x": ["500", "500"], - "machine_max_speed_y": ["500", "500"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["20000", "20000"], - "machine_max_acceleration_y": ["20000", "20000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["20000", "20000"], - "machine_max_acceleration_retracting": ["20000", "20000"], - "machine_max_acceleration_travel": ["20000", "20000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.06"], - "max_layer_height": ["0.3"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.2"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "500", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 HYBRID 500 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 HYBRID 500", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.5 nozzle.json index 9eb0716da33..fe02ac3d46f 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.5 nozzle.json @@ -1,57 +1,59 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 HYBRID 500 0.5 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 HYBRID 500", - "printer_variant": "0.5", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "500x0", - "500x500", - "0x500" - ], - "machine_max_speed_x": ["500", "500"], - "machine_max_speed_y": ["500", "500"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["20000", "20000"], - "machine_max_acceleration_y": ["20000", "20000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["20000", "20000"], - "machine_max_acceleration_retracting": ["20000", "20000"], - "machine_max_acceleration_travel": ["20000", "20000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.07"], - "max_layer_height": ["0.32"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.25"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "500", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 HYBRID 500 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 HYBRID 500", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.07"], + "max_layer_height": ["0.32"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.25"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.6 nozzle.json index d606c82b540..8e6770ee8ee 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.6 nozzle.json @@ -1,57 +1,59 @@ -{ - "type": "machine", - "setting_id": "GM002", - "name": "RatRig V-Core 4 HYBRID 500 0.6 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Core 4 HYBRID 500", - "printer_variant": "0.6", - "nozzle_diameter": [ - "0.6" - ], - "printable_area": [ - "0x0", - "500x0", - "500x500", - "0x500" - ], - "machine_max_speed_x": ["500", "500"], - "machine_max_speed_y": ["500", "500"], - "machine_max_speed_z": ["200", "200"], - "machine_max_speed_e": ["120", "120"], - "machine_max_acceleration_x": ["20000", "20000"], - "machine_max_acceleration_y": ["20000", "20000"], - "machine_max_acceleration_z": ["200", "200"], - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["20000", "20000"], - "machine_max_acceleration_retracting": ["20000", "20000"], - "machine_max_acceleration_travel": ["20000", "20000"], - "machine_max_jerk_x": ["5", "5"], - "machine_max_jerk_y": ["5", "5"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_max_jerk_e": ["5", "5"], - "min_layer_height": ["0.1"], - "max_layer_height": ["0.4"], - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "retract_lift_below": ["0.3"], - "retraction_length": ["0.8"], - "retraction_speed": ["120"], - "deretraction_speed": ["120"], - "wipe": ["1"], - "retract_before_wipe": ["70%"], - "z_hop": ["0.2"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", - "printable_height": "500", - "thumbnails": [ - "64x64/PNG", - "400x300/PNG" - ] -} +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 HYBRID 500 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 HYBRID 500", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.1"], + "max_layer_height": ["0.4"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json index 0c27eeea8d9..e690e9d6328 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Core 4 HYBRID 500", - "model_id": "V-Core_4_HYBRID_500", - "nozzle_diameter": "0.4;0.5;0.6", - "machine_tech": "FFF", - "family": "RatRig_V-Core", - "bed_model": "ratrig-vcore-bed-500.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Core 4 HYBRID 500", + "model_id": "V-Core_4_HYBRID_500", + "nozzle_diameter": "0.4;0.5;0.6", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-500.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json new file mode 100644 index 00000000000..aa07a1ea1e5 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", "0.4" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120","120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.5 nozzle.json new file mode 100644 index 00000000000..a970b9e5fbc --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.5 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", "0.5" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.07"], + "max_layer_height": ["0.32"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.25"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.6 nozzle.json new file mode 100644 index 00000000000..32d8671cbf2 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", "0.6" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.1"], + "max_layer_height": ["0.4"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.8 nozzle.json new file mode 100644 index 00000000000..066eb2ca376 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.8 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", "0.8" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.12"], + "max_layer_height": ["0.5"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle.json new file mode 100644 index 00000000000..b58b319fca8 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300 COPY MODE", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", "0.4" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "75x0", + "225x0", + "225x300", + "75x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle.json new file mode 100644 index 00000000000..e74ad709b8f --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300 COPY MODE", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", "0.5" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "75x0", + "225x0", + "225x300", + "75x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle.json new file mode 100644 index 00000000000..0ced5f19922 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300 COPY MODE", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", "0.6" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "75x0", + "225x0", + "225x300", + "75x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle.json new file mode 100644 index 00000000000..dad0a31ff11 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300 COPY MODE", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", "0.8" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "75x0", + "225x0", + "225x300", + "75x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json new file mode 100644 index 00000000000..d5a19d1dfd6 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "RatRig V-Core 4 IDEX 300 COPY MODE", + "model_id": "V-Core_4_IDEX_300_COPY_MODE", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-300-copy-mode.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle.json new file mode 100644 index 00000000000..0f2dffbc290 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300 MIRROR MODE", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", "0.4" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "75x0", + "195x0", + "195x300", + "75x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle.json new file mode 100644 index 00000000000..92079c300d6 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300 MIRROR MODE", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", "0.5" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "75x0", + "195x0", + "195x300", + "75x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle.json new file mode 100644 index 00000000000..37f55de026a --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300 MIRROR MODE", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", "0.6" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "75x0", + "195x0", + "195x300", + "75x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle.json new file mode 100644 index 00000000000..e07b8f909df --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 300 MIRROR MODE", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", "0.8" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "75x0", + "195x0", + "195x300", + "75x300" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "300", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json new file mode 100644 index 00000000000..cd9edb7338c --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "RatRig V-Core 4 IDEX 300 MIRROR MODE", + "model_id": "V-Core_4_IDEX_300_MIRROR_MODE", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-300-mirror-mode.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json new file mode 100644 index 00000000000..26467139951 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "RatRig V-Core 4 IDEX 300", + "model_id": "V-Core_4_IDEX_300", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-300.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.4 nozzle.json new file mode 100644 index 00000000000..e9d618e4cfb --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.4 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", "0.4" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120","120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.5 nozzle.json new file mode 100644 index 00000000000..30258285dfb --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.5 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", "0.5" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.07"], + "max_layer_height": ["0.32"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.25"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.6 nozzle.json new file mode 100644 index 00000000000..afb678c7574 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", "0.6" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.1"], + "max_layer_height": ["0.4"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.8 nozzle.json new file mode 100644 index 00000000000..1029b314967 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.8 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", "0.8" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.12"], + "max_layer_height": ["0.5"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle.json new file mode 100644 index 00000000000..1ebb0e43d5a --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400 COPY MODE", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", "0.4" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "100x0", + "300x0", + "300x400", + "100x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle.json new file mode 100644 index 00000000000..5e54f74c26d --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400 COPY MODE", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", "0.5" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "100x0", + "300x0", + "300x400", + "100x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle.json new file mode 100644 index 00000000000..1546f1af37a --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400 COPY MODE", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", "0.6" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "100x0", + "300x0", + "300x400", + "100x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle.json new file mode 100644 index 00000000000..0447369abd8 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400 COPY MODE", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", "0.8" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "100x0", + "300x0", + "300x400", + "100x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json new file mode 100644 index 00000000000..3809e83182f --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "RatRig V-Core 4 IDEX 400 COPY MODE", + "model_id": "V-Core_4_IDEX_400_COPY_MODE", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-400-copy-mode.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle.json new file mode 100644 index 00000000000..471dc2e969d --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400 MIRROR MODE", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", "0.4" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "100x0", + "270x0", + "270x400", + "100x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle.json new file mode 100644 index 00000000000..3e56f5b8ab5 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400 MIRROR MODE", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", "0.5" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "100x0", + "270x0", + "270x400", + "100x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle.json new file mode 100644 index 00000000000..d690b5fb6b5 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400 MIRROR MODE", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", "0.6" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "100x0", + "270x0", + "270x400", + "100x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle.json new file mode 100644 index 00000000000..bb139db3854 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 400 MIRROR MODE", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", "0.8" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "100x0", + "270x0", + "270x400", + "100x400" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "400", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json new file mode 100644 index 00000000000..4650ac56d6c --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "RatRig V-Core 4 IDEX 400 MIRROR MODE", + "model_id": "V-Core_4_IDEX_400_MIRROR_MODE", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-400-mirror-mode.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json new file mode 100644 index 00000000000..4b3d6e0b206 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "RatRig V-Core 4 IDEX 400", + "model_id": "V-Core_4_IDEX_400", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-400.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.4 nozzle.json new file mode 100644 index 00000000000..d19c2d8e0f7 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.4 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", "0.4" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120","120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.5 nozzle.json new file mode 100644 index 00000000000..63d4304d183 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.5 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", "0.5" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.07"], + "max_layer_height": ["0.32"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.25"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.6 nozzle.json new file mode 100644 index 00000000000..9b4c31b942a --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", "0.6" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.1"], + "max_layer_height": ["0.4"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.8 nozzle.json new file mode 100644 index 00000000000..ec4d7a5caaf --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.8 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", "0.8" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.12"], + "max_layer_height": ["0.5"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.3"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle.json new file mode 100644 index 00000000000..e706d3e62e1 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500 COPY MODE", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", "0.4" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "125x0", + "375x0", + "375x500", + "125x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle.json new file mode 100644 index 00000000000..e5229c11b2f --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500 COPY MODE", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", "0.5" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "125x0", + "375x0", + "375x500", + "125x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle.json new file mode 100644 index 00000000000..9393e010461 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500 COPY MODE", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", "0.6" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "125x0", + "375x0", + "375x500", + "125x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle.json new file mode 100644 index 00000000000..1a865979500 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500 COPY MODE", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", "0.8" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "125x0", + "375x0", + "375x500", + "125x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json new file mode 100644 index 00000000000..4e1a84dd062 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "RatRig V-Core 4 IDEX 500 COPY MODE", + "model_id": "V-Core_4_IDEX_500_COPY_MODE", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-500-copy-mode.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle.json new file mode 100644 index 00000000000..61098ade9c7 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500 MIRROR MODE", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", "0.4" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "125x0", + "345x0", + "345x500", + "125x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle.json new file mode 100644 index 00000000000..bbf6d214b5a --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500 MIRROR MODE", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", "0.5" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "125x0", + "345x0", + "345x500", + "125x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle.json new file mode 100644 index 00000000000..0447e4341c7 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500 MIRROR MODE", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", "0.6" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "125x0", + "345x0", + "345x500", + "125x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle.json new file mode 100644 index 00000000000..c581bf9fe56 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "machine", + "setting_id": "GM002", + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Core 4 IDEX 500 MIRROR MODE", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", "0.8" + ], + "extruder_offset": [ + "0x0", + "0x0" + ], + "manual_filament_change": "0", + "single_extruder_multi_material": "0", + "printable_area": [ + "125x0", + "345x0", + "345x500", + "125x500" + ], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["200", "200"], + "machine_max_speed_e": ["120", "120"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["20000", "20000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_jerk_x": ["5", "5"], + "machine_max_jerk_y": ["5", "5"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_jerk_e": ["5", "5"], + "min_layer_height": ["0.06"], + "max_layer_height": ["0.3"], + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "retract_lift_below": ["0.2"], + "retraction_length": ["0.8"], + "retraction_speed": ["120"], + "deretraction_speed": ["120"], + "wipe": ["1"], + "retract_before_wipe": ["70%"], + "z_hop": ["0.2"], + "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}", + "change_filament_gcode": "", + "machine_pause_gcode": "PAUSE", + "printing_by_object_gcode": ";BETWEEN_OBJECTS\nG92 E0", + "printable_height": "500", + "time_lapse_gcode": "TIMELAPSE_TAKE_FRAME", + "thumbnails": [ + "64x64/PNG", + "100x100/PNG", + "400x300/PNG" + ] +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json new file mode 100644 index 00000000000..c00b02b5bc1 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "RatRig V-Core 4 IDEX 500 MIRROR MODE", + "model_id": "V-Core_4_IDEX_500_MIRROR_MODE", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-500-mirror-mode.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json new file mode 100644 index 00000000000..fd6e6653a30 --- /dev/null +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "RatRig V-Core 4 IDEX 500", + "model_id": "V-Core_4_IDEX_500", + "nozzle_diameter": "0.4;0.5;0.6;0.8", + "machine_tech": "FFF", + "family": "RatRig_V-Core", + "bed_model": "ratrig-vcore-bed-500.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PCTG;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Minion 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Minion 0.4 nozzle.json index 8ddfa830ca5..5e995c9b880 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Minion 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Minion 0.4 nozzle.json @@ -1,19 +1,19 @@ -{ - "type": "machine", - "setting_id": "GM005", - "name": "RatRig V-Minion 0.4 nozzle", - "from": "system", - "instantiation": "true", - "inherits": "fdm_klipper_common", - "printer_model": "RatRig V-Minion", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "180x0", - "180x180", - "0x180" - ], - "printable_height": "180" -} +{ + "type": "machine", + "setting_id": "GM005", + "name": "RatRig V-Minion 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_klipper_common", + "printer_model": "RatRig V-Minion", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "180x0", + "180x180", + "0x180" + ], + "printable_height": "180" +} diff --git a/resources/profiles/Ratrig/machine/RatRig V-Minion.json b/resources/profiles/Ratrig/machine/RatRig V-Minion.json index d15326c8427..89ea5189ab9 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Minion.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Minion.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "name": "RatRig V-Minion", - "model_id": "V-Minion", - "nozzle_diameter": "0.4", - "machine_tech": "FFF", - "family": "RatRig_V-Minion", - "bed_model": "ratrig-vminion-bed.stl", - "bed_texture": "ratrig_logo.svg", - "hotend_model": "", - "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" -} +{ + "type": "machine_model", + "name": "RatRig V-Minion", + "model_id": "V-Minion", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "RatRig_V-Minion", + "bed_model": "ratrig-vminion-bed.stl", + "bed_texture": "ratrig_logo.svg", + "hotend_model": "", + "default_materials": "RatRig Generic ABS;RatRig Generic PLA;RatRig Generic PLA-CF;RatRig Generic PETG;RatRig Generic TPU;RatRig Generic ASA;RatRig Generic PC;RatRig Generic PVA;RatRig Generic PA;RatRig Generic PA-CF" +} diff --git a/resources/profiles/Ratrig/machine/fdm_klipper_common.json b/resources/profiles/Ratrig/machine/fdm_klipper_common.json index 82b19d85c59..d2a880d6735 100644 --- a/resources/profiles/Ratrig/machine/fdm_klipper_common.json +++ b/resources/profiles/Ratrig/machine/fdm_klipper_common.json @@ -1,60 +1,61 @@ -{ - "type": "machine", - "name": "fdm_klipper_common", - "from": "system", - "instantiation": "false", - "inherits": "fdm_machine_common", - "gcode_flavor": "klipper", - "machine_max_acceleration_e": ["5000", "5000"], - "machine_max_acceleration_extruding": ["9000", "9000"], - "machine_max_acceleration_retracting": ["9000", "9000"], - "machine_max_acceleration_travel": ["9000", "9000"], - "machine_max_acceleration_x": ["9000", "9000"], - "machine_max_acceleration_y": ["9000", "9000"], - "machine_max_acceleration_z": ["100", "100"], - "machine_max_speed_e": ["60", "60"], - "machine_max_speed_x": ["500", "200"], - "machine_max_speed_y": ["500", "200"], - "machine_max_speed_z": ["12", "12"], - "machine_max_jerk_e": ["5", "5"], - "machine_max_jerk_x": ["7", "7"], - "machine_max_jerk_y": ["7", "7"], - "machine_max_jerk_z": ["0.4", "0.4"], - "machine_min_extruding_rate": ["0", "0"], - "machine_min_travel_rate": ["0", "0"], - "max_layer_height": ["0.3"], - "min_layer_height": ["0.05"], - "printable_height": "500", - "extruder_clearance_radius": "45", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_height_to_lid": "140", - "printer_settings_id": "", - "printer_technology": "FFF", - "printer_variant": "0.4", - "retraction_minimum_travel": ["1"], - "retract_before_wipe": ["70%"], - "retract_when_changing_layer": ["1"], - "retraction_length": ["1.0"], - "retract_length_toolchange": ["2"], - "z_hop": ["0.4"], - "retract_restart_extra": ["0"], - "retract_restart_extra_toolchange": ["0"], - "retraction_speed": ["40"], - "deretraction_speed": ["30"], - "z_hop_types": "Normal Lift", - "silent_mode": "0", - "single_extruder_multi_material": "1", - "change_filament_gcode": "M600", - "machine_pause_gcode": "PAUSE", - "wipe": ["1"], - "default_filament_profile": ["RatRig Generic ABS"], - "default_print_profile": "0.20mm Standard @RatRig", - "bed_exclude_area": ["0x0"], - "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", - "machine_end_gcode": "END_PRINT", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", - "scan_first_layer": "0", - "nozzle_type": "undefine", - "auxiliary_fan": "0" -} +{ + "type": "machine", + "name": "fdm_klipper_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_machine_common", + "gcode_flavor": "klipper", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["9000", "9000"], + "machine_max_acceleration_retracting": ["9000", "9000"], + "machine_max_acceleration_travel": ["9000", "9000"], + "machine_max_acceleration_x": ["9000", "9000"], + "machine_max_acceleration_y": ["9000", "9000"], + "machine_max_acceleration_z": ["100", "100"], + "machine_max_speed_e": ["60", "60"], + "machine_max_speed_x": ["500", "200"], + "machine_max_speed_y": ["500", "200"], + "machine_max_speed_z": ["12", "12"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["7", "7"], + "machine_max_jerk_y": ["7", "7"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_min_extruding_rate": ["0", "0"], + "machine_min_travel_rate": ["0", "0"], + "max_layer_height": ["0.3"], + "min_layer_height": ["0.05"], + "printable_height": "500", + "extruder_clearance_radius": "45", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_height_to_lid": "140", + "printer_settings_id": "", + "printer_technology": "FFF", + "printer_variant": "0.4", + "retraction_minimum_travel": ["1"], + "retract_before_wipe": ["70%"], + "retract_when_changing_layer": ["1"], + "retraction_length": ["1.0"], + "retract_length_toolchange": ["2"], + "z_hop": ["0.4"], + "retract_restart_extra": ["0"], + "retract_restart_extra_toolchange": ["0"], + "retraction_speed": ["40"], + "deretraction_speed": ["30"], + "z_hop_types": "Normal Lift", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "manual_filament_change": "1", + "change_filament_gcode": "M600", + "machine_pause_gcode": "PAUSE", + "wipe": ["1"], + "default_filament_profile": ["RatRig Generic ABS"], + "default_print_profile": "0.20mm Standard @RatRig", + "bed_exclude_area": ["0x0"], + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_end_gcode": "END_PRINT", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "scan_first_layer": "0", + "nozzle_type": "undefine", + "auxiliary_fan": "0" +} diff --git a/resources/profiles/Ratrig/machine/fdm_machine_common.json b/resources/profiles/Ratrig/machine/fdm_machine_common.json index a18c3333ca8..40005361833 100644 --- a/resources/profiles/Ratrig/machine/fdm_machine_common.json +++ b/resources/profiles/Ratrig/machine/fdm_machine_common.json @@ -1,117 +1,117 @@ -{ - "type": "machine", - "name": "fdm_machine_common", - "from": "system", - "instantiation": "false", - "printer_technology": "FFF", - "deretraction_speed": [ - "40" - ], - "extruder_colour": [ - "#FCE94F" - ], - "extruder_offset": [ - "0x0" - ], - "gcode_flavor": "marlin", - "silent_mode": "0", - "machine_max_acceleration_e": [ - "5000" - ], - "machine_max_acceleration_extruding": [ - "10000" - ], - "machine_max_acceleration_retracting": [ - "1000" - ], - "machine_max_acceleration_x": [ - "10000" - ], - "machine_max_acceleration_y": [ - "10000" - ], - "machine_max_acceleration_z": [ - "100" - ], - "machine_max_speed_e": [ - "60" - ], - "machine_max_speed_x": [ - "500" - ], - "machine_max_speed_y": [ - "500" - ], - "machine_max_speed_z": [ - "10" - ], - "machine_max_jerk_e": [ - "5" - ], - "machine_max_jerk_x": [ - "8" - ], - "machine_max_jerk_y": [ - "8" - ], - "machine_max_jerk_z": [ - "0.4" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "max_layer_height": [ - "0.32" - ], - "min_layer_height": [ - "0.08" - ], - "printable_height": "500", - "extruder_clearance_radius": "65", - "extruder_clearance_height_to_rod": "36", - "extruder_clearance_height_to_lid": "140", - "nozzle_diameter": [ - "0.4" - ], - "printer_settings_id": "", - "printer_variant": "0.4", - "retraction_minimum_travel": [ - "2" - ], - "retract_before_wipe": [ - "70%" - ], - "retract_when_changing_layer": [ - "1" - ], - "retraction_length": [ - "5" - ], - "retract_length_toolchange": [ - "1" - ], - "z_hop": [ - "0" - ], - "retract_restart_extra": [ - "0" - ], - "retract_restart_extra_toolchange": [ - "0" - ], - "retraction_speed": [ - "60" - ], - "single_extruder_multi_material": "1", - "change_filament_gcode": "", - "wipe": [ - "1" - ], - "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", - "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", - "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" -} +{ + "type": "machine", + "name": "fdm_machine_common", + "from": "system", + "instantiation": "false", + "printer_technology": "FFF", + "deretraction_speed": [ + "40" + ], + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "gcode_flavor": "marlin", + "silent_mode": "0", + "machine_max_acceleration_e": [ + "5000" + ], + "machine_max_acceleration_extruding": [ + "10000" + ], + "machine_max_acceleration_retracting": [ + "1000" + ], + "machine_max_acceleration_x": [ + "10000" + ], + "machine_max_acceleration_y": [ + "10000" + ], + "machine_max_acceleration_z": [ + "100" + ], + "machine_max_speed_e": [ + "60" + ], + "machine_max_speed_x": [ + "500" + ], + "machine_max_speed_y": [ + "500" + ], + "machine_max_speed_z": [ + "10" + ], + "machine_max_jerk_e": [ + "5" + ], + "machine_max_jerk_x": [ + "8" + ], + "machine_max_jerk_y": [ + "8" + ], + "machine_max_jerk_z": [ + "0.4" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "printable_height": "500", + "extruder_clearance_radius": "65", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "nozzle_diameter": [ + "0.4" + ], + "printer_settings_id": "", + "printer_variant": "0.4", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_length": [ + "5" + ], + "retract_length_toolchange": [ + "1" + ], + "z_hop": [ + "0" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retraction_speed": [ + "60" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "", + "wipe": [ + "1" + ], + "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", + "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" +} diff --git a/resources/profiles/Ratrig/process/0.08mm Extra Fine @RatRig.json b/resources/profiles/Ratrig/process/0.08mm Extra Fine @RatRig.json index 6e0634b6cad..fb458948990 100644 --- a/resources/profiles/Ratrig/process/0.08mm Extra Fine @RatRig.json +++ b/resources/profiles/Ratrig/process/0.08mm Extra Fine @RatRig.json @@ -1,20 +1,20 @@ -{ - "type": "process", - "setting_id": "GP001", - "name": "0.08mm Extra Fine @RatRig", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.08", - "bottom_shell_layers": "7", - "top_shell_layers": "9", - "compatible_printers": [ - "RatRig V-Core 3 200 0.4 nozzle", - "RatRig V-Core 3 300 0.4 nozzle", - "RatRig V-Core 3 400 0.4 nozzle", - "RatRig V-Core 3 500 0.4 nozzle", - "RatRig V-Minion 0.4 nozzle", - "RatRig V-Cast 0.4 nozzle", - "RatRig V-Cast 0.6 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP001", + "name": "0.08mm Extra Fine @RatRig", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.08", + "bottom_shell_layers": "7", + "top_shell_layers": "9", + "compatible_printers": [ + "RatRig V-Core 3 200 0.4 nozzle", + "RatRig V-Core 3 300 0.4 nozzle", + "RatRig V-Core 3 400 0.4 nozzle", + "RatRig V-Core 3 500 0.4 nozzle", + "RatRig V-Minion 0.4 nozzle", + "RatRig V-Cast 0.4 nozzle", + "RatRig V-Cast 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.12mm Fine @RatRig.json b/resources/profiles/Ratrig/process/0.12mm Fine @RatRig.json index 3ccac5be9b1..cd519daa640 100644 --- a/resources/profiles/Ratrig/process/0.12mm Fine @RatRig.json +++ b/resources/profiles/Ratrig/process/0.12mm Fine @RatRig.json @@ -1,20 +1,20 @@ -{ - "type": "process", - "setting_id": "GP002", - "name": "0.12mm Fine @RatRig", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.12", - "bottom_shell_layers": "5", - "top_shell_layers": "6", - "compatible_printers": [ - "RatRig V-Core 3 200 0.4 nozzle", - "RatRig V-Core 3 300 0.4 nozzle", - "RatRig V-Core 3 400 0.4 nozzle", - "RatRig V-Core 3 500 0.4 nozzle", - "RatRig V-Minion 0.4 nozzle", - "RatRig V-Cast 0.4 nozzle", - "RatRig V-Cast 0.6 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP002", + "name": "0.12mm Fine @RatRig", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.12", + "bottom_shell_layers": "5", + "top_shell_layers": "6", + "compatible_printers": [ + "RatRig V-Core 3 200 0.4 nozzle", + "RatRig V-Core 3 300 0.4 nozzle", + "RatRig V-Core 3 400 0.4 nozzle", + "RatRig V-Core 3 500 0.4 nozzle", + "RatRig V-Minion 0.4 nozzle", + "RatRig V-Cast 0.4 nozzle", + "RatRig V-Cast 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.15mm Optimal @RatRig.json b/resources/profiles/Ratrig/process/0.15mm Optimal @RatRig.json index 80e1c1274ed..f8fc9acd0b9 100644 --- a/resources/profiles/Ratrig/process/0.15mm Optimal @RatRig.json +++ b/resources/profiles/Ratrig/process/0.15mm Optimal @RatRig.json @@ -1,20 +1,20 @@ -{ - "type": "process", - "setting_id": "GP003", - "name": "0.15mm Optimal @RatRig", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "bottom_shell_layers": "4", - "top_shell_layers": "5", - "layer_height": "0.15", - "compatible_printers": [ - "RatRig V-Core 3 200 0.4 nozzle", - "RatRig V-Core 3 300 0.4 nozzle", - "RatRig V-Core 3 400 0.4 nozzle", - "RatRig V-Core 3 500 0.4 nozzle", - "RatRig V-Minion 0.4 nozzle", - "RatRig V-Cast 0.4 nozzle", - "RatRig V-Cast 0.6 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP003", + "name": "0.15mm Optimal @RatRig", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "bottom_shell_layers": "4", + "top_shell_layers": "5", + "layer_height": "0.15", + "compatible_printers": [ + "RatRig V-Core 3 200 0.4 nozzle", + "RatRig V-Core 3 300 0.4 nozzle", + "RatRig V-Core 3 400 0.4 nozzle", + "RatRig V-Core 3 500 0.4 nozzle", + "RatRig V-Minion 0.4 nozzle", + "RatRig V-Cast 0.4 nozzle", + "RatRig V-Cast 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Bambu Support W @RatRig.json b/resources/profiles/Ratrig/process/0.20mm Bambu Support W @RatRig.json index 6a563c84d37..3e4b2431bbc 100644 --- a/resources/profiles/Ratrig/process/0.20mm Bambu Support W @RatRig.json +++ b/resources/profiles/Ratrig/process/0.20mm Bambu Support W @RatRig.json @@ -1,29 +1,29 @@ -{ - "type": "process", - "setting_id": "GP004", - "name": "0.20mm Bambu Support W @RatRig", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_bbl_0.20", - "enable_support": "1", - "support_interface_top_layers": "3", - "support_top_z_distance": "0.2", - "support_interface_loop_pattern": "1", - "support_interface_spacing": "0", - "support_interface_speed": "80", - "support_filament": "0", - "support_interface_filament": "0", - "enable_prime_tower": "0", - "initial_layer_speed": "50", - "initial_layer_infill_speed": "105", - "outer_wall_speed": "120", - "inner_wall_speed": "200", - "sparse_infill_speed": "300", - "internal_solid_infill_speed": "200", - "top_surface_speed": "100", - "gap_infill_speed": "100", - "travel_speed": "350", - "compatible_printers": [ - "RatRig V-Core 3 500 0.4 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Bambu Support W @RatRig", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_bbl_0.20", + "enable_support": "1", + "support_interface_top_layers": "3", + "support_top_z_distance": "0.2", + "support_interface_loop_pattern": "1", + "support_interface_spacing": "0", + "support_interface_speed": "80", + "support_filament": "0", + "support_interface_filament": "0", + "enable_prime_tower": "0", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "120", + "inner_wall_speed": "200", + "sparse_infill_speed": "300", + "internal_solid_infill_speed": "200", + "top_surface_speed": "100", + "gap_infill_speed": "100", + "travel_speed": "350", + "compatible_printers": [ + "RatRig V-Core 3 500 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 0.4.json b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 0.4.json index b65a4b50cd7..7fab3994837 100644 --- a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 0.4.json +++ b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 0.4.json @@ -1,62 +1,62 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.20mm Quality @RatRig V-Core 4 0.4", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.2", - "inital_layer_height": "0.3", - "wall_count": "4", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "350", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "500", - "initial_layer_speed": "50", - "outer_wall_acceleration": "4000", - "inner_wall_acceleration": "8000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "10000", - "bridge_acceleration": "2500", - "initial_layer_acceleration": "1500", - "travel_acceleration": "10000", - "default_acceleration": "10000", - "line_width": "0.45", - "initial_layer_line_width": "0.5", - "inner_wall_line_width": "0.45", - "outer_wall_line_width": "0.45", - "sparse_infill_line_width": "0.45", - "internal_solid_infill_line_width": "0.45", - "top_surface_line_width": "0.45", - "support_line_width": "0.45", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 300 0.4 nozzle", - "RatRig V-Core 4 400 0.4 nozzle", - "RatRig V-Core 4 500 0.4 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.20mm Quality @RatRig V-Core 4 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.2", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "350", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "500", + "initial_layer_speed": "50", + "outer_wall_acceleration": "4000", + "inner_wall_acceleration": "8000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "2500", + "initial_layer_acceleration": "1500", + "travel_acceleration": "10000", + "default_acceleration": "10000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.45", + "support_line_width": "0.45", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 300 0.4 nozzle", + "RatRig V-Core 4 400 0.4 nozzle", + "RatRig V-Core 4 500 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 0.5.json b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 0.5.json index 1bc3d680c8d..fb6e3c4e056 100644 --- a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 0.5.json +++ b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 0.5.json @@ -1,62 +1,62 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.20mm Quality @RatRig V-Core 4 0.5", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.2", - "inital_layer_height": "0.3", - "wall_count": "4", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "350", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "500", - "initial_layer_speed": "50", - "outer_wall_acceleration": "4000", - "inner_wall_acceleration": "8000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "10000", - "bridge_acceleration": "2500", - "initial_layer_acceleration": "1500", - "travel_acceleration": "10000", - "default_acceleration": "10000", - "line_width": "0.55", - "initial_layer_line_width": "0.7", - "inner_wall_line_width": "0.55", - "outer_wall_line_width": "0.52", - "sparse_infill_line_width": "0.55", - "internal_solid_infill_line_width": "0.55", - "top_surface_line_width": "0.55", - "support_line_width": "0.55", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 300 0.5 nozzle", - "RatRig V-Core 4 400 0.5 nozzle", - "RatRig V-Core 4 500 0.5 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.20mm Quality @RatRig V-Core 4 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.2", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "350", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "500", + "initial_layer_speed": "50", + "outer_wall_acceleration": "4000", + "inner_wall_acceleration": "8000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "2500", + "initial_layer_acceleration": "1500", + "travel_acceleration": "10000", + "default_acceleration": "10000", + "line_width": "0.55", + "initial_layer_line_width": "0.7", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.52", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 300 0.5 nozzle", + "RatRig V-Core 4 400 0.5 nozzle", + "RatRig V-Core 4 500 0.5 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.4.json b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.4.json index 4027e25c7fe..e335f4813f0 100644 --- a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.4.json +++ b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.4.json @@ -1,62 +1,62 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.4", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.2", - "inital_layer_height": "0.3", - "wall_count": "4", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "300", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "600", - "initial_layer_speed": "80", - "outer_wall_acceleration": "8000", - "inner_wall_acceleration": "10000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "15000", - "bridge_acceleration": "5000", - "initial_layer_acceleration": "2500", - "travel_acceleration": "15000", - "default_acceleration": "15000", - "line_width": "0.45", - "initial_layer_line_width": "0.5", - "inner_wall_line_width": "0.45", - "outer_wall_line_width": "0.45", - "sparse_infill_line_width": "0.45", - "internal_solid_infill_line_width": "0.45", - "top_surface_line_width": "0.45", - "support_line_width": "0.45", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 HYBRID 300 0.4 nozzle", - "RatRig V-Core 4 HYBRID 400 0.4 nozzle", - "RatRig V-Core 4 HYBRID 500 0.4 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.2", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.45", + "support_line_width": "0.45", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 HYBRID 300 0.4 nozzle", + "RatRig V-Core 4 HYBRID 400 0.4 nozzle", + "RatRig V-Core 4 HYBRID 500 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.5.json b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.5.json index be118426d12..ffc7e971f90 100644 --- a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.5.json +++ b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.5.json @@ -1,62 +1,62 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.5", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.2", - "inital_layer_height": "0.3", - "wall_count": "4", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "300", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "600", - "initial_layer_speed": "80", - "outer_wall_acceleration": "8000", - "inner_wall_acceleration": "10000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "15000", - "bridge_acceleration": "5000", - "initial_layer_acceleration": "2500", - "travel_acceleration": "15000", - "default_acceleration": "15000", - "line_width": "0.55", - "initial_layer_line_width": "0.7", - "inner_wall_line_width": "0.55", - "outer_wall_line_width": "0.52", - "sparse_infill_line_width": "0.55", - "internal_solid_infill_line_width": "0.55", - "top_surface_line_width": "0.55", - "support_line_width": "0.55", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 HYBRID 300 0.5 nozzle", - "RatRig V-Core 4 HYBRID 400 0.5 nozzle", - "RatRig V-Core 4 HYBRID 500 0.5 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.2", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.55", + "initial_layer_line_width": "0.7", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.52", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 HYBRID 300 0.5 nozzle", + "RatRig V-Core 4 HYBRID 400 0.5 nozzle", + "RatRig V-Core 4 HYBRID 500 0.5 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.6.json b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.6.json new file mode 100644 index 00000000000..3fd4096decc --- /dev/null +++ b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 HYBRID 0.6.json @@ -0,0 +1,62 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.20mm Quality @RatRig V-Core 4 HYBRID 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.2", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.65", + "initial_layer_line_width": "0.8", + "inner_wall_line_width": "0.60", + "outer_wall_line_width": "0.58", + "sparse_infill_line_width": "0.60", + "internal_solid_infill_line_width": "0.60", + "top_surface_line_width": "0.60", + "support_line_width": "0.60", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 HYBRID 300 0.6 nozzle", + "RatRig V-Core 4 HYBRID 400 0.6 nozzle", + "RatRig V-Core 4 HYBRID 500 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 IDEX 0.4.json b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 IDEX 0.4.json new file mode 100644 index 00000000000..d4e76cb2ea2 --- /dev/null +++ b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 IDEX 0.4.json @@ -0,0 +1,48 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.20mm Quality @RatRig V-Core 4 IDEX 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_idex", + "layer_height": "0.2", + "inital_layer_height": "0.3", + "initial_layer_print_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.45", + "support_line_width": "0.45", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.4 nozzle", + "RatRig V-Core 4 IDEX 400 0.4 nozzle", + "RatRig V-Core 4 IDEX 500 0.4 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 IDEX 0.5.json b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 IDEX 0.5.json new file mode 100644 index 00000000000..7dcecb85340 --- /dev/null +++ b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 IDEX 0.5.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.20mm Quality @RatRig V-Core 4 IDEX 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.2", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.55", + "initial_layer_line_width": "0.7", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.52", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.5 nozzle", + "RatRig V-Core 4 IDEX 400 0.5 nozzle", + "RatRig V-Core 4 IDEX 500 0.5 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 IDEX 0.6.json b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 IDEX 0.6.json new file mode 100644 index 00000000000..d47a72d8add --- /dev/null +++ b/resources/profiles/Ratrig/process/0.20mm Quality @RatRig V-Core 4 IDEX 0.6.json @@ -0,0 +1,47 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.20mm Quality @RatRig V-Core 4 IDEX 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_idex", + "layer_height": "0.2", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "line_width": "0.65", + "initial_layer_line_width": "0.8", + "inner_wall_line_width": "0.60", + "outer_wall_line_width": "0.58", + "sparse_infill_line_width": "0.60", + "internal_solid_infill_line_width": "0.60", + "top_surface_line_width": "0.60", + "support_line_width": "0.60", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 0.6 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.20mm Standard @RatRig.json b/resources/profiles/Ratrig/process/0.20mm Standard @RatRig.json index 4d27bb0b724..34b03de75c3 100644 --- a/resources/profiles/Ratrig/process/0.20mm Standard @RatRig.json +++ b/resources/profiles/Ratrig/process/0.20mm Standard @RatRig.json @@ -1,20 +1,20 @@ -{ - "type": "process", - "setting_id": "GP005", - "name": "0.20mm Standard @RatRig", - "from": "system", - "inherits": "fdm_process_ratrig_common", - "instantiation": "true", - "layer_height": "0.2", - "bottom_shell_layers": "3", - "top_shell_layers": "4", - "compatible_printers": [ - "RatRig V-Core 3 200 0.4 nozzle", - "RatRig V-Core 3 300 0.4 nozzle", - "RatRig V-Core 3 400 0.4 nozzle", - "RatRig V-Core 3 500 0.4 nozzle", - "RatRig V-Minion 0.4 nozzle", - "RatRig V-Cast 0.4 nozzle", - "RatRig V-Cast 0.6 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP005", + "name": "0.20mm Standard @RatRig", + "from": "system", + "inherits": "fdm_process_ratrig_common", + "instantiation": "true", + "layer_height": "0.2", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "compatible_printers": [ + "RatRig V-Core 3 200 0.4 nozzle", + "RatRig V-Core 3 300 0.4 nozzle", + "RatRig V-Core 3 400 0.4 nozzle", + "RatRig V-Core 3 500 0.4 nozzle", + "RatRig V-Minion 0.4 nozzle", + "RatRig V-Cast 0.4 nozzle", + "RatRig V-Cast 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.24mm Draft @RatRig.json b/resources/profiles/Ratrig/process/0.24mm Draft @RatRig.json index 253cbc11f54..ef6888035aa 100644 --- a/resources/profiles/Ratrig/process/0.24mm Draft @RatRig.json +++ b/resources/profiles/Ratrig/process/0.24mm Draft @RatRig.json @@ -1,21 +1,21 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.24mm Draft @RatRig", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.24", - "top_surface_line_width": "0.45", - "bottom_shell_layers": "3", - "top_shell_layers": "4", - "compatible_printers": [ - "RatRig V-Core 3 200 0.4 nozzle", - "RatRig V-Core 3 300 0.4 nozzle", - "RatRig V-Core 3 400 0.4 nozzle", - "RatRig V-Core 3 500 0.4 nozzle", - "RatRig V-Minion 0.4 nozzle", - "RatRig V-Cast 0.4 nozzle", - "RatRig V-Cast 0.6 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.24mm Draft @RatRig", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.24", + "top_surface_line_width": "0.45", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "compatible_printers": [ + "RatRig V-Core 3 200 0.4 nozzle", + "RatRig V-Core 3 300 0.4 nozzle", + "RatRig V-Core 3 400 0.4 nozzle", + "RatRig V-Core 3 500 0.4 nozzle", + "RatRig V-Minion 0.4 nozzle", + "RatRig V-Cast 0.4 nozzle", + "RatRig V-Cast 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.4.json b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.4.json index 3bf5a1faa25..447f305fd22 100644 --- a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.4.json +++ b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.4.json @@ -1,62 +1,62 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.25mm Quality Speed @RatRig V-Core 4 0.4", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.25", - "inital_layer_height": "0.3", - "wall_count": "4", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "350", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "500", - "initial_layer_speed": "50", - "outer_wall_acceleration": "4000", - "inner_wall_acceleration": "8000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "10000", - "bridge_acceleration": "2500", - "initial_layer_acceleration": "1500", - "travel_acceleration": "10000", - "default_acceleration": "10000", - "line_width": "0.45", - "initial_layer_line_width": "0.5", - "inner_wall_line_width": "0.45", - "outer_wall_line_width": "0.45", - "sparse_infill_line_width": "0.45", - "internal_solid_infill_line_width": "0.45", - "top_surface_line_width": "0.45", - "support_line_width": "0.45", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 300 0.4 nozzle", - "RatRig V-Core 4 400 0.4 nozzle", - "RatRig V-Core 4 500 0.4 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Quality Speed @RatRig V-Core 4 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "350", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "500", + "initial_layer_speed": "50", + "outer_wall_acceleration": "4000", + "inner_wall_acceleration": "8000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "2500", + "initial_layer_acceleration": "1500", + "travel_acceleration": "10000", + "default_acceleration": "10000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.45", + "support_line_width": "0.45", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 300 0.4 nozzle", + "RatRig V-Core 4 400 0.4 nozzle", + "RatRig V-Core 4 500 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.5.json b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.5.json index 5f9277cd55f..5f253d2d1ab 100644 --- a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.5.json +++ b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.5.json @@ -1,62 +1,62 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.25mm Quality Speed @RatRig V-Core 4 0.5", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.25", - "inital_layer_height": "0.3", - "wall_count": "4", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "350", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "500", - "initial_layer_speed": "50", - "outer_wall_acceleration": "4000", - "inner_wall_acceleration": "8000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "10000", - "bridge_acceleration": "2500", - "initial_layer_acceleration": "1500", - "travel_acceleration": "10000", - "default_acceleration": "10000", - "line_width": "0.55", - "initial_layer_line_width": "0.7", - "inner_wall_line_width": "0.55", - "outer_wall_line_width": "0.52", - "sparse_infill_line_width": "0.55", - "internal_solid_infill_line_width": "0.55", - "top_surface_line_width": "0.55", - "support_line_width": "0.55", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 300 0.5 nozzle", - "RatRig V-Core 4 400 0.5 nozzle", - "RatRig V-Core 4 500 0.5 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Quality Speed @RatRig V-Core 4 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "350", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "500", + "initial_layer_speed": "50", + "outer_wall_acceleration": "4000", + "inner_wall_acceleration": "8000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "2500", + "initial_layer_acceleration": "1500", + "travel_acceleration": "10000", + "default_acceleration": "10000", + "line_width": "0.55", + "initial_layer_line_width": "0.7", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.52", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 300 0.5 nozzle", + "RatRig V-Core 4 400 0.5 nozzle", + "RatRig V-Core 4 500 0.5 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.6.json b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.6.json index 785ec5e762d..282dabea111 100644 --- a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.6.json +++ b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 0.6.json @@ -1,62 +1,62 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.25mm Quality Speed @RatRig V-Core 4 0.6", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.25", - "inital_layer_height": "0.35", - "wall_count": "3", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "350", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "500", - "initial_layer_speed": "50", - "outer_wall_acceleration": "4000", - "inner_wall_acceleration": "8000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "10000", - "bridge_acceleration": "2500", - "initial_layer_acceleration": "1500", - "travel_acceleration": "10000", - "default_acceleration": "10000", - "line_width": "0.65", - "initial_layer_line_width": "0.84", - "inner_wall_line_width": "0.65", - "outer_wall_line_width": "0.65", - "sparse_infill_line_width": "0.65", - "internal_solid_infill_line_width": "0.65", - "top_surface_line_width": "0.65", - "support_line_width": "0.65", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 300 0.6 nozzle", - "RatRig V-Core 4 400 0.6 nozzle", - "RatRig V-Core 4 500 0.6 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Quality Speed @RatRig V-Core 4 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.35", + "wall_count": "3", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "350", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "500", + "initial_layer_speed": "50", + "outer_wall_acceleration": "4000", + "inner_wall_acceleration": "8000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "2500", + "initial_layer_acceleration": "1500", + "travel_acceleration": "10000", + "default_acceleration": "10000", + "line_width": "0.65", + "initial_layer_line_width": "0.84", + "inner_wall_line_width": "0.65", + "outer_wall_line_width": "0.65", + "sparse_infill_line_width": "0.65", + "internal_solid_infill_line_width": "0.65", + "top_surface_line_width": "0.65", + "support_line_width": "0.65", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 300 0.6 nozzle", + "RatRig V-Core 4 400 0.6 nozzle", + "RatRig V-Core 4 500 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4.json b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4.json index adb0bcb43fe..b1a15080417 100644 --- a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4.json +++ b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4.json @@ -1,62 +1,62 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.25", - "inital_layer_height": "0.3", - "wall_count": "4", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "300", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "600", - "initial_layer_speed": "80", - "outer_wall_acceleration": "8000", - "inner_wall_acceleration": "10000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "15000", - "bridge_acceleration": "5000", - "initial_layer_acceleration": "2500", - "travel_acceleration": "15000", - "default_acceleration": "15000", - "line_width": "0.45", - "initial_layer_line_width": "0.5", - "inner_wall_line_width": "0.45", - "outer_wall_line_width": "0.45", - "sparse_infill_line_width": "0.45", - "internal_solid_infill_line_width": "0.45", - "top_surface_line_width": "0.45", - "support_line_width": "0.45", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 HYBRID 300 0.4 nozzle", - "RatRig V-Core 4 HYBRID 400 0.4 nozzle", - "RatRig V-Core 4 HYBRID 500 0.4 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Quality Speed @RatRig V-Core 4 HYBRID 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.45", + "support_line_width": "0.45", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 HYBRID 300 0.4 nozzle", + "RatRig V-Core 4 HYBRID 400 0.4 nozzle", + "RatRig V-Core 4 HYBRID 500 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.4.json b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.4.json new file mode 100644 index 00000000000..80c006825db --- /dev/null +++ b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.4.json @@ -0,0 +1,48 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_idex", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "initial_layer_print_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.45", + "support_line_width": "0.45", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.4 nozzle", + "RatRig V-Core 4 IDEX 400 0.4 nozzle", + "RatRig V-Core 4 IDEX 500 0.4 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.5.json b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.5.json new file mode 100644 index 00000000000..39f63347e11 --- /dev/null +++ b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.5.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.55", + "initial_layer_line_width": "0.7", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.55", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.5 nozzle", + "RatRig V-Core 4 IDEX 400 0.5 nozzle", + "RatRig V-Core 4 IDEX 500 0.5 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.6.json b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.6.json new file mode 100644 index 00000000000..460b7494dcd --- /dev/null +++ b/resources/profiles/Ratrig/process/0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.6.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Quality Speed @RatRig V-Core 4 IDEX 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "4", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.65", + "initial_layer_line_width": "0.84", + "inner_wall_line_width": "0.65", + "outer_wall_line_width": "0.65", + "sparse_infill_line_width": "0.65", + "internal_solid_infill_line_width": "0.65", + "top_surface_line_width": "0.65", + "support_line_width": "0.65", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 0.6 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 0.4.json b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 0.4.json index c14483511d2..c9aded94e9c 100644 --- a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 0.4.json +++ b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 0.4.json @@ -1,60 +1,60 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.25mm Speed @RatRig V-Core 4 0.4", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.25", - "inital_layer_height": "0.3", - "wall_count": "2", - "top_shell_layers": "3", - "bottom_shell_layers": "2", - "top_shell_thickness": "0", - "sparse_infill_density": "10%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "400", - "small_perimeter_speed": "350", - "outer_wall_speed": "400", - "sparse_infill_speed": "500", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "150", - "gap_infill_speed": "200", - "travel_speed": "600", - "initial_layer_speed": "200", - "outer_wall_acceleration": "8000", - "inner_wall_acceleration": "10000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "10000", - "bridge_acceleration": "5000", - "initial_layer_acceleration": "2500", - "travel_acceleration": "15000", - "default_acceleration": "10000", - "line_width": "0.45", - "initial_layer_line_width": "0.5", - "inner_wall_line_width": "0.45", - "outer_wall_line_width": "0.45", - "sparse_infill_line_width": "0.45", - "internal_solid_infill_line_width": "0.45", - "top_surface_line_width": "0.45", - "support_line_width": "0.45", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 300 0.4 nozzle", - "RatRig V-Core 4 400 0.4 nozzle", - "RatRig V-Core 4 500 0.4 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Speed @RatRig V-Core 4 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "2", + "top_shell_layers": "3", + "bottom_shell_layers": "2", + "top_shell_thickness": "0", + "sparse_infill_density": "10%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "400", + "small_perimeter_speed": "350", + "outer_wall_speed": "400", + "sparse_infill_speed": "500", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "150", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "200", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "10000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.45", + "support_line_width": "0.45", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 300 0.4 nozzle", + "RatRig V-Core 4 400 0.4 nozzle", + "RatRig V-Core 4 500 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 0.5.json b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 0.5.json index c720ad9ad13..664a7f033b5 100644 --- a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 0.5.json +++ b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 0.5.json @@ -1,60 +1,60 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.25mm Speed @RatRig V-Core 4 0.5", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.25", - "inital_layer_height": "0.3", - "wall_count": "2", - "top_shell_layers": "3", - "bottom_shell_layers": "2", - "top_shell_thickness": "0", - "sparse_infill_density": "10%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "400", - "small_perimeter_speed": "350", - "outer_wall_speed": "400", - "sparse_infill_speed": "500", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "150", - "gap_infill_speed": "200", - "travel_speed": "600", - "initial_layer_speed": "200", - "outer_wall_acceleration": "8000", - "inner_wall_acceleration": "10000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "10000", - "bridge_acceleration": "5000", - "initial_layer_acceleration": "2500", - "travel_acceleration": "15000", - "default_acceleration": "10000", - "line_width": "0.55", - "initial_layer_line_width": "0.7", - "inner_wall_line_width": "0.55", - "outer_wall_line_width": "0.52", - "sparse_infill_line_width": "0.55", - "internal_solid_infill_line_width": "0.55", - "top_surface_line_width": "0.55", - "support_line_width": "0.55", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 300 0.5 nozzle", - "RatRig V-Core 4 400 0.5 nozzle", - "RatRig V-Core 4 500 0.5 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Speed @RatRig V-Core 4 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "2", + "top_shell_layers": "3", + "bottom_shell_layers": "2", + "top_shell_thickness": "0", + "sparse_infill_density": "10%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "400", + "small_perimeter_speed": "350", + "outer_wall_speed": "400", + "sparse_infill_speed": "500", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "150", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "200", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "10000", + "line_width": "0.55", + "initial_layer_line_width": "0.7", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.52", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 300 0.5 nozzle", + "RatRig V-Core 4 400 0.5 nozzle", + "RatRig V-Core 4 500 0.5 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.4.json b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.4.json index c277f10ff36..1baa8ac4194 100644 --- a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.4.json +++ b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 HYBRID 0.4.json @@ -1,60 +1,60 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.4", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.25", - "inital_layer_height": "0.3", - "wall_count": "2", - "top_shell_layers": "3", - "bottom_shell_layers": "2", - "top_shell_thickness": "0", - "sparse_infill_density": "10%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "500", - "small_perimeter_speed": "500", - "outer_wall_speed": "500", - "sparse_infill_speed": "500", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "150", - "gap_infill_speed": "200", - "travel_speed": "800", - "initial_layer_speed": "200", - "outer_wall_acceleration": "15000", - "inner_wall_acceleration": "20000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "20000", - "bridge_acceleration": "5000", - "initial_layer_acceleration": "2500", - "travel_acceleration": "10000", - "default_acceleration": "20000", - "line_width": "0.45", - "initial_layer_line_width": "0.5", - "inner_wall_line_width": "0.45", - "outer_wall_line_width": "0.45", - "sparse_infill_line_width": "0.45", - "internal_solid_infill_line_width": "0.45", - "top_surface_line_width": "0.45", - "support_line_width": "0.45", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 HYBRID 300 0.4 nozzle", - "RatRig V-Core 4 HYBRID 400 0.4 nozzle", - "RatRig V-Core 4 HYBRID 500 0.4 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Speed @RatRig V-Core 4 HYBRID 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "2", + "top_shell_layers": "3", + "bottom_shell_layers": "2", + "top_shell_thickness": "0", + "sparse_infill_density": "10%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "500", + "small_perimeter_speed": "500", + "outer_wall_speed": "500", + "sparse_infill_speed": "500", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "150", + "gap_infill_speed": "200", + "travel_speed": "800", + "initial_layer_speed": "200", + "outer_wall_acceleration": "15000", + "inner_wall_acceleration": "20000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "20000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "10000", + "default_acceleration": "20000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.45", + "support_line_width": "0.45", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 HYBRID 300 0.4 nozzle", + "RatRig V-Core 4 HYBRID 400 0.4 nozzle", + "RatRig V-Core 4 HYBRID 500 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.4.json b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.4.json new file mode 100644 index 00000000000..863651e98bf --- /dev/null +++ b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.4.json @@ -0,0 +1,67 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Speed @RatRig V-Core 4 IDEX 0.4", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_idex", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "initial_layer_print_height": "0.3", + "wall_count": "2", + "top_shell_layers": "3", + "bottom_shell_layers": "2", + "top_shell_thickness": "0", + "sparse_infill_density": "10%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "500", + "small_perimeter_speed": "500", + "outer_wall_speed": "500", + "sparse_infill_speed": "500", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "150", + "gap_infill_speed": "200", + "travel_speed": "800", + "initial_layer_speed": "200", + "outer_wall_acceleration": "15000", + "inner_wall_acceleration": "20000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "10000", + "default_acceleration": "20000", + "line_width": "0.45", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "outer_wall_line_width": "0.45", + "sparse_infill_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "top_surface_line_width": "0.45", + "support_line_width": "0.45", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.4 nozzle", + "RatRig V-Core 4 IDEX 400 0.4 nozzle", + "RatRig V-Core 4 IDEX 500 0.4 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.5.json b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.5.json new file mode 100644 index 00000000000..914e08f7f92 --- /dev/null +++ b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.5.json @@ -0,0 +1,66 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Speed @RatRig V-Core 4 IDEX 0.5", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_idex", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "2", + "top_shell_layers": "3", + "bottom_shell_layers": "2", + "top_shell_thickness": "0", + "sparse_infill_density": "10%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "500", + "small_perimeter_speed": "500", + "outer_wall_speed": "500", + "sparse_infill_speed": "500", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "150", + "gap_infill_speed": "200", + "travel_speed": "800", + "initial_layer_speed": "200", + "outer_wall_acceleration": "15000", + "inner_wall_acceleration": "20000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "10000", + "default_acceleration": "20000", + "line_width": "0.55", + "initial_layer_line_width": "0.7", + "inner_wall_line_width": "0.55", + "outer_wall_line_width": "0.52", + "sparse_infill_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "top_surface_line_width": "0.55", + "support_line_width": "0.55", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.5 nozzle", + "RatRig V-Core 4 IDEX 400 0.5 nozzle", + "RatRig V-Core 4 IDEX 500 0.5 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.6.json b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.6.json new file mode 100644 index 00000000000..228ca516891 --- /dev/null +++ b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.6.json @@ -0,0 +1,66 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Speed @RatRig V-Core 4 IDEX 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "2", + "top_shell_layers": "3", + "bottom_shell_layers": "2", + "top_shell_thickness": "0", + "sparse_infill_density": "10%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "500", + "small_perimeter_speed": "500", + "outer_wall_speed": "500", + "sparse_infill_speed": "500", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "150", + "gap_infill_speed": "200", + "travel_speed": "800", + "initial_layer_speed": "200", + "outer_wall_acceleration": "15000", + "inner_wall_acceleration": "20000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "20000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "10000", + "default_acceleration": "20000", + "line_width": "0.65", + "initial_layer_line_width": "0.9", + "inner_wall_line_width": "0.65", + "outer_wall_line_width": "0.60", + "sparse_infill_line_width": "0.65", + "internal_solid_infill_line_width": "0.65", + "top_surface_line_width": "0.65", + "support_line_width": "0.65", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 0.6 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.8.json b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.8.json new file mode 100644 index 00000000000..a3f5cc08059 --- /dev/null +++ b/resources/profiles/Ratrig/process/0.25mm Speed @RatRig V-Core 4 IDEX 0.8.json @@ -0,0 +1,66 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.25mm Speed @RatRig V-Core 4 IDEX 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.25", + "inital_layer_height": "0.3", + "wall_count": "2", + "top_shell_layers": "3", + "bottom_shell_layers": "2", + "top_shell_thickness": "0", + "sparse_infill_density": "10%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "500", + "small_perimeter_speed": "500", + "outer_wall_speed": "500", + "sparse_infill_speed": "500", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "150", + "gap_infill_speed": "200", + "travel_speed": "800", + "initial_layer_speed": "200", + "outer_wall_acceleration": "15000", + "inner_wall_acceleration": "20000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "20000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "10000", + "default_acceleration": "20000", + "line_width": "0.75", + "initial_layer_line_width": "1.1", + "inner_wall_line_width": "0.75", + "outer_wall_line_width": "0.70", + "sparse_infill_line_width": "0.75", + "internal_solid_infill_line_width": "0.75", + "top_surface_line_width": "0.75", + "support_line_width": "0.75", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.8 nozzle", + "RatRig V-Core 4 IDEX 400 0.8 nozzle", + "RatRig V-Core 4 IDEX 500 0.8 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.28mm Extra Draft @RatRig.json b/resources/profiles/Ratrig/process/0.28mm Extra Draft @RatRig.json index e0935d7fe50..df29c9cfd16 100644 --- a/resources/profiles/Ratrig/process/0.28mm Extra Draft @RatRig.json +++ b/resources/profiles/Ratrig/process/0.28mm Extra Draft @RatRig.json @@ -1,21 +1,21 @@ -{ - "type": "process", - "setting_id": "GP007", - "name": "0.28mm Extra Draft @RatRig", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.28", - "top_surface_line_width": "0.45", - "bottom_shell_layers": "3", - "top_shell_layers": "4", - "compatible_printers": [ - "RatRig V-Core 3 200 0.4 nozzle", - "RatRig V-Core 3 300 0.4 nozzle", - "RatRig V-Core 3 400 0.4 nozzle", - "RatRig V-Core 3 500 0.4 nozzle", - "RatRig V-Minion 0.4 nozzle", - "RatRig V-Cast 0.4 nozzle", - "RatRig V-Cast 0.6 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP007", + "name": "0.28mm Extra Draft @RatRig", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.28", + "top_surface_line_width": "0.45", + "bottom_shell_layers": "3", + "top_shell_layers": "4", + "compatible_printers": [ + "RatRig V-Core 3 200 0.4 nozzle", + "RatRig V-Core 3 300 0.4 nozzle", + "RatRig V-Core 3 400 0.4 nozzle", + "RatRig V-Core 3 500 0.4 nozzle", + "RatRig V-Minion 0.4 nozzle", + "RatRig V-Cast 0.4 nozzle", + "RatRig V-Cast 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 0.6.json b/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 0.6.json index 70df1a4edbd..8ee283a50eb 100644 --- a/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 0.6.json +++ b/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 0.6.json @@ -1,67 +1,67 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.30mm Big @RatRig V-Core 4 0.6", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.3", - "inital_layer_height": "0.35", - "wall_count": "3", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "350", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "500", - "initial_layer_speed": "50", - "enable_overhang_speed": "1", - "overhang_1_4_speed": "20", - "overhang_2_4_speed": "45", - "overhang_3_4_speed": "80", - "overhang_4_4_speed": "100", - "outer_wall_acceleration": "4000", - "inner_wall_acceleration": "8000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "10000", - "bridge_acceleration": "2500", - "initial_layer_acceleration": "1500", - "travel_acceleration": "10000", - "default_acceleration": "10000", - "line_width": "0.65", - "initial_layer_line_width": "0.84", - "inner_wall_line_width": "0.65", - "outer_wall_line_width": "0.65", - "sparse_infill_line_width": "0.65", - "internal_solid_infill_line_width": "0.65", - "top_surface_line_width": "0.65", - "support_line_width": "0.65", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 300 0.6 nozzle", - "RatRig V-Core 4 400 0.6 nozzle", - "RatRig V-Core 4 500 0.6 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.30mm Big @RatRig V-Core 4 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.3", + "inital_layer_height": "0.35", + "wall_count": "3", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "350", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "500", + "initial_layer_speed": "50", + "enable_overhang_speed": "1", + "overhang_1_4_speed": "20", + "overhang_2_4_speed": "45", + "overhang_3_4_speed": "80", + "overhang_4_4_speed": "100", + "outer_wall_acceleration": "4000", + "inner_wall_acceleration": "8000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "2500", + "initial_layer_acceleration": "1500", + "travel_acceleration": "10000", + "default_acceleration": "10000", + "line_width": "0.65", + "initial_layer_line_width": "0.84", + "inner_wall_line_width": "0.65", + "outer_wall_line_width": "0.65", + "sparse_infill_line_width": "0.65", + "internal_solid_infill_line_width": "0.65", + "top_surface_line_width": "0.65", + "support_line_width": "0.65", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 300 0.6 nozzle", + "RatRig V-Core 4 400 0.6 nozzle", + "RatRig V-Core 4 500 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 HYBRID 0.6.json b/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 HYBRID 0.6.json index 0bbc5f062e2..fd9cbba40ae 100644 --- a/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 HYBRID 0.6.json +++ b/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 HYBRID 0.6.json @@ -1,67 +1,67 @@ -{ - "type": "process", - "setting_id": "GP006", - "name": "0.30mm Big @RatRig V-Core 4 HYBRID 0.6", - "from": "system", - "instantiation": "true", - "inherits": "fdm_process_ratrig_common", - "layer_height": "0.3", - "inital_layer_height": "0.35", - "wall_count": "3", - "top_shell_layers": "4", - "bottom_shell_layers": "3", - "top_shell_thickness": "0", - "sparse_infill_density": "25%", - "infill_anchor": "600%", - "infill_anchor_max": "5", - "infill_combination": "1", - "skirt_loops": "2", - "skirt_distance": "10", - "support_threshold_angle": "65", - "support_bottom_z_distance": "0.2", - "support_on_build_plate_only": "1", - "support_object_xy_distance": "60%", - "inner_wall_speed": "300", - "small_perimeter_speed": "250", - "outer_wall_speed": "250", - "sparse_infill_speed": "400", - "internal_solid_infill_speed": "100%", - "top_surface_speed": "100%", - "support_speed": "50", - "support_interface_speed": "100%", - "bridge_speed": "50", - "gap_infill_speed": "200", - "travel_speed": "600", - "initial_layer_speed": "80", - "enable_overhang_speed": "1", - "overhang_1_4_speed": "20", - "overhang_2_4_speed": "45", - "overhang_3_4_speed": "80", - "overhang_4_4_speed": "100", - "outer_wall_acceleration": "8000", - "inner_wall_acceleration": "10000", - "top_surface_acceleration": "0", - "internal_solid_infill_acceleration": "0", - "sparse_infill_acceleration": "15000", - "bridge_acceleration": "5000", - "initial_layer_acceleration": "2500", - "travel_acceleration": "15000", - "default_acceleration": "15000", - "line_width": "0.65", - "initial_layer_line_width": "0.84", - "inner_wall_line_width": "0.65", - "outer_wall_line_width": "0.65", - "sparse_infill_line_width": "0.65", - "internal_solid_infill_line_width": "0.65", - "top_surface_line_width": "0.65", - "support_line_width": "0.65", - "infill_wall_overlap": "18%", - "bridge_flow": "0.85", - "resolution": "0.0125", - "elefant_foot_compensation": "0.1", - "compatible_printers": [ - "RatRig V-Core 4 HYBRID 300 0.6 nozzle", - "RatRig V-Core 4 HYBRID 400 0.6 nozzle", - "RatRig V-Core 4 HYBRID 500 0.6 nozzle" - ] -} +{ + "type": "process", + "setting_id": "GP006", + "name": "0.30mm Big @RatRig V-Core 4 HYBRID 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.3", + "inital_layer_height": "0.35", + "wall_count": "3", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "enable_overhang_speed": "1", + "overhang_1_4_speed": "20", + "overhang_2_4_speed": "45", + "overhang_3_4_speed": "80", + "overhang_4_4_speed": "100", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.65", + "initial_layer_line_width": "0.84", + "inner_wall_line_width": "0.65", + "outer_wall_line_width": "0.65", + "sparse_infill_line_width": "0.65", + "internal_solid_infill_line_width": "0.65", + "top_surface_line_width": "0.65", + "support_line_width": "0.65", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 HYBRID 300 0.6 nozzle", + "RatRig V-Core 4 HYBRID 400 0.6 nozzle", + "RatRig V-Core 4 HYBRID 500 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 IDEX 0.6.json b/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 IDEX 0.6.json new file mode 100644 index 00000000000..6c857802d61 --- /dev/null +++ b/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 IDEX 0.6.json @@ -0,0 +1,73 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.30mm Big @RatRig V-Core 4 IDEX 0.6", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_idex", + "layer_height": "0.3", + "inital_layer_height": "0.35", + "wall_count": "3", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "enable_overhang_speed": "1", + "overhang_1_4_speed": "20", + "overhang_2_4_speed": "45", + "overhang_3_4_speed": "80", + "overhang_4_4_speed": "100", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.65", + "initial_layer_line_width": "0.84", + "inner_wall_line_width": "0.65", + "outer_wall_line_width": "0.65", + "sparse_infill_line_width": "0.65", + "internal_solid_infill_line_width": "0.65", + "top_surface_line_width": "0.65", + "support_line_width": "0.65", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 0.6 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 IDEX 0.8.json b/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 IDEX 0.8.json new file mode 100644 index 00000000000..025f9d9447f --- /dev/null +++ b/resources/profiles/Ratrig/process/0.30mm Big @RatRig V-Core 4 IDEX 0.8.json @@ -0,0 +1,73 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.30mm Big @RatRig V-Core 4 IDEX 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.3", + "inital_layer_height": "0.35", + "wall_count": "3", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "25%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "enable_overhang_speed": "1", + "overhang_1_4_speed": "20", + "overhang_2_4_speed": "45", + "overhang_3_4_speed": "80", + "overhang_4_4_speed": "100", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.75", + "initial_layer_line_width": "1.1", + "inner_wall_line_width": "0.75", + "outer_wall_line_width": "0.70", + "sparse_infill_line_width": "0.75", + "internal_solid_infill_line_width": "0.75", + "top_surface_line_width": "0.75", + "support_line_width": "0.75", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.8 nozzle", + "RatRig V-Core 4 IDEX 400 0.8 nozzle", + "RatRig V-Core 4 IDEX 500 0.8 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/0.35mm Extra Big @RatRig V-Core 4 IDEX 0.8.json b/resources/profiles/Ratrig/process/0.35mm Extra Big @RatRig V-Core 4 IDEX 0.8.json new file mode 100644 index 00000000000..d1c885254ec --- /dev/null +++ b/resources/profiles/Ratrig/process/0.35mm Extra Big @RatRig V-Core 4 IDEX 0.8.json @@ -0,0 +1,73 @@ +{ + "type": "process", + "setting_id": "GP006", + "name": "0.35mm Extra Big @RatRig V-Core 4 IDEX 0.8", + "from": "system", + "instantiation": "true", + "inherits": "fdm_process_ratrig_common", + "layer_height": "0.35", + "inital_layer_height": "0.4", + "wall_count": "3", + "top_shell_layers": "4", + "bottom_shell_layers": "3", + "top_shell_thickness": "0", + "sparse_infill_density": "30%", + "infill_anchor": "600%", + "infill_anchor_max": "5", + "infill_combination": "1", + "skirt_loops": "2", + "skirt_distance": "10", + "support_threshold_angle": "65", + "support_bottom_z_distance": "0.2", + "support_on_build_plate_only": "1", + "support_object_xy_distance": "60%", + "inner_wall_speed": "300", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "600", + "initial_layer_speed": "80", + "enable_overhang_speed": "1", + "overhang_1_4_speed": "20", + "overhang_2_4_speed": "45", + "overhang_3_4_speed": "80", + "overhang_4_4_speed": "100", + "outer_wall_acceleration": "8000", + "inner_wall_acceleration": "10000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "15000", + "bridge_acceleration": "5000", + "initial_layer_acceleration": "2500", + "travel_acceleration": "15000", + "default_acceleration": "15000", + "line_width": "0.75", + "initial_layer_line_width": "1.1", + "inner_wall_line_width": "0.75", + "outer_wall_line_width": "0.70", + "sparse_infill_line_width": "0.75", + "internal_solid_infill_line_width": "0.75", + "top_surface_line_width": "0.75", + "support_line_width": "0.75", + "infill_wall_overlap": "18%", + "bridge_flow": "0.85", + "resolution": "0.0125", + "elefant_foot_compensation": "0.1", + "compatible_printers": [ + "RatRig V-Core 4 IDEX 300 0.8 nozzle", + "RatRig V-Core 4 IDEX 400 0.8 nozzle", + "RatRig V-Core 4 IDEX 500 0.8 nozzle", + "RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle", + "RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle" + ] +} diff --git a/resources/profiles/Ratrig/process/fdm_process_common.json b/resources/profiles/Ratrig/process/fdm_process_common.json index 1da14b4d918..6fd08864e2d 100644 --- a/resources/profiles/Ratrig/process/fdm_process_common.json +++ b/resources/profiles/Ratrig/process/fdm_process_common.json @@ -1,70 +1,70 @@ -{ - "type": "process", - "name": "fdm_process_common", - "from": "system", - "instantiation": "false", - "adaptive_layer_height": "0", - "reduce_crossing_wall": "0", - "bridge_flow": "0.95", - "bridge_speed": "25", - "brim_width": "5", - "compatible_printers": [], - "print_sequence": "by layer", - "default_acceleration": "10000", - "bridge_no_support": "0", - "elefant_foot_compensation": "0.1", - "outer_wall_line_width": "0.4", - "outer_wall_speed": "120", - "line_width": "0.45", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "crosshatch", - "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "20", - "gap_infill_speed": "30", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "25%", - "sparse_infill_speed": "50", - "interface_shells": "0", - "detect_overhang_wall": "0", - "reduce_infill_retraction": "0", - "filename_format": "{input_filename_base}.gcode", - "wall_loops": "3", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "40", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "nearest", - "skirt_distance": "2", - "skirt_height": "2", - "minimum_sparse_infill_area": "0", - "internal_solid_infill_line_width": "0.45", - "internal_solid_infill_speed": "40", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_filament": "0", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.15", - "support_interface_loop_pattern": "0", - "support_interface_top_layers": "2", - "support_interface_spacing": "0", - "support_interface_speed": "80", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2", - "support_speed": "40", - "support_threshold_angle": "30", - "support_object_xy_distance": "0.5", - "detect_thin_wall": "0", - "top_surface_line_width": "0.4", - "top_surface_speed": "30", - "travel_speed": "400", - "enable_prime_tower": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0" -} +{ + "type": "process", + "name": "fdm_process_common", + "from": "system", + "instantiation": "false", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "bridge_flow": "0.95", + "bridge_speed": "25", + "brim_width": "5", + "compatible_printers": [], + "print_sequence": "by layer", + "default_acceleration": "10000", + "bridge_no_support": "0", + "elefant_foot_compensation": "0.1", + "outer_wall_line_width": "0.4", + "outer_wall_speed": "120", + "line_width": "0.45", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_line_width": "0.42", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "20", + "gap_infill_speed": "30", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "25%", + "sparse_infill_speed": "50", + "interface_shells": "0", + "detect_overhang_wall": "0", + "reduce_infill_retraction": "0", + "filename_format": "{input_filename_base}.gcode", + "wall_loops": "3", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "40", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "nearest", + "skirt_distance": "2", + "skirt_height": "2", + "minimum_sparse_infill_area": "0", + "internal_solid_infill_line_width": "0.45", + "internal_solid_infill_speed": "40", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "support_filament": "0", + "support_line_width": "0.42", + "support_interface_filament": "0", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.15", + "support_interface_loop_pattern": "0", + "support_interface_top_layers": "2", + "support_interface_spacing": "0", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_speed": "40", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.5", + "detect_thin_wall": "0", + "top_surface_line_width": "0.4", + "top_surface_speed": "30", + "travel_speed": "400", + "enable_prime_tower": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0" +} diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json index e5da6affa15..019d9b87d3a 100644 --- a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json +++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json @@ -1,115 +1,115 @@ -{ - "type": "process", - "name": "fdm_process_ratrig_common", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_common", - "adaptive_layer_height": "0", - "reduce_crossing_wall": "0", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bridge_flow": "0.80", - "bridge_speed": "25", - "internal_bridge_speed" : "70", - "brim_width": "5", - "brim_object_gap": "0.1", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "default_acceleration": "5000", - "top_surface_acceleration": "3000", - "travel_acceleration": "5000", - "inner_wall_acceleration": "5000", - "outer_wall_acceleration": "3000", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.4", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "crosshatch", - "initial_layer_acceleration": "500", - "initial_layer_line_width": "0.45", - "inital_layer_height": "0.2", - "infill_combination": "0", - "sparse_infill_line_width": "0.4", - "infill_wall_overlap": "25%", - "interface_shells": "0", - "ironing_flow": "10%", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "layer_height": "0.2", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "60", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.40", - "wall_loops": "3", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "minimum_sparse_infill_area": "15", - "internal_solid_infill_line_width": "0.4", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.2", - "support_filament": "0", - "support_line_width": "0.4", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "2", - "support_interface_bottom_layers": "2", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2.5", - "support_speed": "150", - "support_threshold_angle": "30", - "support_object_xy_distance": "0.35", - "tree_support_branch_angle": "45", - "tree_support_wall_count": "0", - "detect_thin_wall": "0", - "top_surface_pattern": "monotonicline", - "top_surface_line_width": "0.4", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "initial_layer_speed": "50", - "initial_layer_infill_speed": "105", - "outer_wall_speed": "120", - "inner_wall_speed": "200", - "internal_solid_infill_speed": "200", - "top_surface_speed": "100", - "gap_infill_speed": "100", - "sparse_infill_speed": "200", - "travel_speed": "350", - "enable_prime_tower": "0", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", - "enable_arc_fitting": "0", - "compatible_printers": [ - "RatRig V-Core 3 200 0.4 nozzle", - "RatRig V-Core 3 300 0.4 nozzle", - "RatRig V-Core 3 400 0.4 nozzle", - "RatRig V-Core 3 500 0.4 nozzle", - "RatRig V-Minion 0.4 nozzle", - "RatRig V-Cast 0.4 nozzle", - "RatRig V-Cast 0.6 nozzle" - ], - "exclude_object": "1" -} +{ + "type": "process", + "name": "fdm_process_ratrig_common", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_common", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.80", + "bridge_speed": "25", + "internal_bridge_speed" : "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "3000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "3000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.45", + "inital_layer_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.4", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "60", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.40", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "initial_layer_speed": "50", + "initial_layer_infill_speed": "105", + "outer_wall_speed": "120", + "inner_wall_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "100", + "gap_infill_speed": "100", + "sparse_infill_speed": "200", + "travel_speed": "350", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "enable_arc_fitting": "0", + "compatible_printers": [ + "RatRig V-Core 3 200 0.4 nozzle", + "RatRig V-Core 3 300 0.4 nozzle", + "RatRig V-Core 3 400 0.4 nozzle", + "RatRig V-Core 3 500 0.4 nozzle", + "RatRig V-Minion 0.4 nozzle", + "RatRig V-Cast 0.4 nozzle", + "RatRig V-Cast 0.6 nozzle" + ], + "exclude_object": "1" +} diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json new file mode 100644 index 00000000000..cf831183743 --- /dev/null +++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json @@ -0,0 +1,122 @@ +{ + "type": "process", + "name": "fdm_process_ratrig_common_idex", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_common", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.80", + "bridge_speed": "25", + "internal_bridge_speed" : "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "3000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "3000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.45", + "inital_layer_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.4", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "60", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.40", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + + + "inner_wall_speed": "350", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "100%", + "top_surface_speed": "100%", + "support_speed": "50", + "support_interface_speed": "100%", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "500", + "initial_layer_speed": "50", + "outer_wall_acceleration": "4000", + "inner_wall_acceleration": "8000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "2500", + "initial_layer_acceleration": "1500", + "travel_acceleration": "10000", + "default_acceleration": "10000", + + + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "enable_arc_fitting": "0", + "exclude_object": "1" +} diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json new file mode 100644 index 00000000000..ec099cd2018 --- /dev/null +++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json @@ -0,0 +1,122 @@ +{ + "type": "process", + "name": "fdm_process_ratrig_idex", + "from": "system", + "instantiation": "false", + "inherits": "fdm_process_common", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "0.80", + "bridge_speed": "25", + "internal_bridge_speed" : "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "5000", + "top_surface_acceleration": "3000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "outer_wall_acceleration": "3000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "outer_wall_line_width": "0.4", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.4", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.45", + "inital_layer_height": "0.2", + "infill_combination": "0", + "sparse_infill_line_width": "0.4", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "60", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "inner_wall_line_width": "0.40", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.4", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.4", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + + + "inner_wall_speed": "350", + "small_perimeter_speed": "250", + "outer_wall_speed": "250", + "sparse_infill_speed": "400", + "internal_solid_infill_speed": "400", + "top_surface_speed": "160", + "support_speed": "50", + "support_interface_speed": "50", + "bridge_speed": "50", + "gap_infill_speed": "200", + "travel_speed": "500", + "initial_layer_speed": "50", + "outer_wall_acceleration": "4000", + "inner_wall_acceleration": "8000", + "top_surface_acceleration": "0", + "internal_solid_infill_acceleration": "0", + "sparse_infill_acceleration": "10000", + "bridge_acceleration": "2500", + "initial_layer_acceleration": "1500", + "travel_acceleration": "10000", + "default_acceleration": "10000", + + + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "enable_arc_fitting": "0", + "exclude_object": "1" +} diff --git a/resources/profiles/Ratrig/ratrig-vcore-bed-400-copy-mode.stl b/resources/profiles/Ratrig/ratrig-vcore-bed-400-copy-mode.stl new file mode 100644 index 00000000000..468daa86d1f Binary files /dev/null and b/resources/profiles/Ratrig/ratrig-vcore-bed-400-copy-mode.stl differ diff --git a/resources/profiles/Ratrig/ratrig-vcore-bed-400-mirror-mode.stl b/resources/profiles/Ratrig/ratrig-vcore-bed-400-mirror-mode.stl new file mode 100644 index 00000000000..a3f7401fba7 Binary files /dev/null and b/resources/profiles/Ratrig/ratrig-vcore-bed-400-mirror-mode.stl differ