Can't find my inverter after install

[lbreggi]

Describe the bug

Hi! I'm getting an error after the instalation of this integration. it completes the instalation but can't find my inverter, meters or battery.

Expected behavior

Be able to add my inverter and the other components of the solar system

Screenshots

Diagnostic File

home-assistant_solaredge_modbus_multi_2024-04-02T18-41-43.830Z.log

Debug logs

No response

Home Assistant Version

2024.3.3

solaredge-modbus-multi Version

2.4.13

Installation Type

HAOS

Read the Instructions

• I have read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki
• My configuration follows https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration
• This issue is not about a template error (template errors should not be reported as an issue, read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Template-Design-Notes)

Additional Context

No response

[WillCodeForCats]

Your inverter stops responding and is timing out the integration:

2024-04-02 13:41:26.298 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Registers received requested : 40 40
2024-04-02 13:41:38.311 DEBUG (MainThread) [custom_components.solaredge_modbus_multi] Finished fetching SolarEdge Coordinator data in 12.345 seconds (success: False)

The long delay between 13:41:26 and 13:41:38 should be where the integration polls the inverter for data.

Try turning off the option "Auto-Detect Additional Entities" under "Configure" button in the integration panel.

[lbreggi]

You are the best! now I was able to detect the meters, but can't find the battery. I believe there is a way to extend the time out query? thanks!!

[WillCodeForCats]

You have battery turned off.

[lbreggi]

yes, the issue is that I'm getting the time out again when I turn the option to look for the battery on

[WillCodeForCats]

Unfortunately that's not an integration problem I can fix, if your inverter does not respond to some modbus registers then that might be a firmware issue.

[lbreggi]

got it.. anyway thanks for your help! just to share I'm running the latest version of the firmware, just in case if someone else face the problem (there is a screenshot with all the versions at the top). thanks again!

[WillCodeForCats]

You should read this discussion where other people have issues with battery related registers not working on some inverter models: Battery integration #63

The "Auto-Detect Additional Entities" setting is related to battery registers, so if that doesn't work then it makes sense that batteries won't work either.

[WillCodeForCats]

Ref: issue #394

[WillCodeForCats]

Ref: PR #416