2.0.1 #41
Replies: 2 comments 10 replies
-
|
Hi, i have a meter. 2022-10-03 16:23:35.176 Elec: device: Inverter values: { |
Beta Was this translation helpful? Give feedback.
-
|
I found a project on GitHub that can read from that charger and store the information in a database: https://github.com/Schueder/keContact Looking at this, I would not add it to this plugin, but build a new plugin specific for that charger. |
Beta Was this translation helpful? Give feedback.
-
|
Hello, Before I had the SE16K Inverter as Master which I read out through Modbus After Upgrading the plugin, the Master Inverter and the Meter are shown properly in Domoticz. In order to try to troubleshoot the Battery, I tried local cloned Plugin version where I uncommented the Battery part. Unfortunately, this seems not to work for the moment (Raspian 11 32bit with python 3.7). I also saw in this configuration, solar_modbus is only supported until 0.7.0 ... I will try next to install everything on a Python3.9 environment (solar_modbus 0.7.2, Python3.9, Domoticz Beta) -> Results of the errors below here 2022-12-19 22:17:53.386 Error: SolarEdge Modbus: Call to function 'onStart' failed, exception details: Verbose Log of Domoticz for the known (working devices) : 2022-12-19 21:57:22.207 "c_model": "SE6000H-RWS00BNO4", |
Beta Was this translation helpful? Give feedback.
-
|
Hi @janreimen, I am more than happy to help out, but I need to know what your inverter is reporting. Then share the output of that here; this allows me to understand your configuration and help you out. |
Beta Was this translation helpful? Give feedback.
-
|
Hi @addiejanssen, As requested the results of the example.py for both IP Adresses of both inverters : The System Master (Modbus ID = 1) is well recognized under Domoticz (Beta), Python 3.7, your plugin version 2.0.2 2022-12-27 17:34:47.190 SolarEdge WR Batt: device: Inverter values: { pi@raspberry4:~/solaredge_modbus $ ./example.py 192.168.178.102 1502 --json |
Beta Was this translation helpful? Give feedback.
-
|
Hi @janreimen, I have created a new discussion from your reply. |
Beta Was this translation helpful? Give feedback.
-
|
In your plugins, I can't find the consumption data of the house. I can see the production, export, import data, but not the consumption data. |
Beta Was this translation helpful? Give feedback.
-
|
That is correct. The plugin will only report the values returned by the inverter and meter. |
Beta Was this translation helpful? Give feedback.
-
This is a pre-release of the 2.x.x version of the plugin which will support reading
meterandbatterydata next to theinverterdata.This is a major rewrite of the plugin and is only tested by a very small group of users so far.
And although it was tested by them, we may not yet have found all issues with it.
We would love to receive feedback on this version in the Discussions before we are going to release it to the public!
We need your help!
Do you have a meter or battery connected to your inverter that is not listed in the table below?
Then please set the log level to verbose and share the output of your inverter with us!
This allows us to make sure that we have valid/real life data that the plugin should be able to work with.
Enjoy!
Addie
This discussion was created from the release 2.0.1.
Beta Was this translation helpful? Give feedback.
All reactions