Sonos no sound

[WadeLuoQ]

Hi dheijl,

I downloaded the 1.10.2 version, and I'm using the Sonos One stereo

I've attached my config (not sure if it helps)

According to the log, everything seems to work but the stereo has no sound at all

Can you please take a look?

Thank you very much!

[dheijl]

Have you tried u32max... and other streamsizes? Is your Sonos the latest firmware? If so, have you tried flac format?

[dheijl]

Also, can you enable the rms monitor so that you can verify that swyh-rs is actually capturing the system audio?

[WadeLuoQ]

Ya, I enabled rms earlier but I don't think it was capturing anything, I'll try change it to 32 later and let you know tmr Btw, the firmware is the latest version Thank you for replying

…

On Thu, Apr 18, 2024, 01:39 dheijl ***@***.***> wrote: Also, can you enable the rms monitor so that you can verify that swyh-rs is actually capturing the system audio? — Reply to this email directly, view it on GitHub <#128 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BH4X5G7JQJ442NGH7AUZ4EDY52XTVAVCNFSM6AAAAABGLW7CYGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRRHA2TIMRSGY> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[dheijl]

If RMS monitor doesn't show any activity than you're not capturing audio so there's nothing to stream to your Sonos.

[WadeLuoQ]

I've tried changing several configs, unfortunately, rms still doesn't capture anything Sonos app on PC indicates it's unable to connect to the IP address Here's how I tried to connect, copy the IP displayed on swyh and add it to the Sonos app as a radio station, is that correct?

…

On Thu, Apr 18, 2024, 03:58 dheijl ***@***.***> wrote: If RMS monitor doesn't show any activity than you're not capturing audio so there's nothing to stream to your Sonos. — Reply to this email directly, view it on GitHub <#128 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BH4X5G33DASAYMFB6YH22T3Y53H47AVCNFSM6AAAAABGLW7CYGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRSGEYTANRWGA> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[WadeLuoQ]

btw, when I used the original swyh, the link ends with .mp3 I was wondering if it has something to do with this, because I read your readme file, your rs version does not support mp3 format dheijl ***@***.***> 於 2024年4月18日週四 上午3:58寫道：

…

If RMS monitor doesn't show any activity than you're not capturing audio so there's nothing to stream to your Sonos. — Reply to this email directly, view it on GitHub <#128 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BH4X5G33DASAYMFB6YH22T3Y53H47AVCNFSM6AAAAABGLW7CYGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRSGEYTANRWGA> . You are receiving this because you authored the thread.Message ID: ***@***.***>

-- United We Rise

[dheijl]

You're barking up the wrong tree. It's useless trying to stream or changing the config until you have found out why the audio isn't captured. The Readme could provide some clues, and I would start with checking the Windows Sound Mixer. When the RMS monitor shows audio activity is when you can start to try the streaming.

[WadeLuoQ]

I see, thank you for pointing that out, I'll try to figure it out later dheijl ***@***.***> 於 2024年4月18日週四 下午2:11寫道：

…

You're barking up the wrong tree. It's useless trying to stream or changing the config until you have found out why the audio isn't captured. The Readme could provide some clues, and I would start with checking the Windows Sound Mixer. When the RMS monitor shows audio activity is when you can start to try the streaming. — Reply to this email directly, view it on GitHub <#128 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BH4X5GZMTD4LKKYZT44KCYDY55P2XAVCNFSM6AAAAABGLW7CYGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRTGA3TKMRVHA> . You are receiving this because you authored the thread.Message ID: ***@***.***>

-- United We Rise

[konyong]

i wonder why your audio source not from virtual cable like in the readme.