You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Put simply, no matter what I try, the engines will NOT run under any circumstances. I have tried manually starting at gate, starting on the runway, starting in the air, nothing at all works. It seams to be an issue with the bleed air system as the valves to the engines wont switch to open on the monitoring display.
My conditions:
To try to rule out my system being the issue I spent an hour reinstalling Microsoft flight simulator (2020) and installed the aircraft using the FBW installer. I started the aircraft using both the "pre-set" feature on the FBW tablet, and manually. I have also disabled all features in the accessibility panel and in the quick access panel. None of Microsoft "AI-Assists" are turned on, everything is set to off"
My setup:
Microsoft Flight Simulator 2020 installed via Steam
RTX 3060 12GB Graphics Card
Ryzen 5800x CPU
NVME SSD
A32NX Installed using the FBW installer
SimBridge enabled
Expected behavior
I expected the engines to start under normal circumstances.
Steps to reproduce
I have used both the FBW tablet to try to start the engines through the pre-set menu, I have also tried starting the engines manually using the Normal Checklist from Airbus for this type.
References (optional)
To demonstrate my issues I have made a video showcasing multiple attempts to start the engines including some information from the dev menu in MSFS, please watch the video as it demonstrates my issues much better than id be able to communicate them through words. There are chapters in the description to skip to the part that you are interested in.
Aircraft Version
Stable
Build info
Describe the bug
Put simply, no matter what I try, the engines will NOT run under any circumstances. I have tried manually starting at gate, starting on the runway, starting in the air, nothing at all works. It seams to be an issue with the bleed air system as the valves to the engines wont switch to open on the monitoring display.
My conditions:
To try to rule out my system being the issue I spent an hour reinstalling Microsoft flight simulator (2020) and installed the aircraft using the FBW installer. I started the aircraft using both the "pre-set" feature on the FBW tablet, and manually. I have also disabled all features in the accessibility panel and in the quick access panel. None of Microsoft "AI-Assists" are turned on, everything is set to off"
My setup:
Expected behavior
I expected the engines to start under normal circumstances.
Steps to reproduce
I have used both the FBW tablet to try to start the engines through the pre-set menu, I have also tried starting the engines manually using the Normal Checklist from Airbus for this type.
References (optional)
To demonstrate my issues I have made a video showcasing multiple attempts to start the engines including some information from the dev menu in MSFS, please watch the video as it demonstrates my issues much better than id be able to communicate them through words. There are chapters in the description to skip to the part that you are interested in.
https://youtu.be/0FUuNlLIYa0
Additional info (optional)
No response
Discord Username (optional)
finn.no
The text was updated successfully, but these errors were encountered: