Skip to content

Latest commit

 

History

History
52 lines (37 loc) · 2.92 KB

connection.md

File metadata and controls

52 lines (37 loc) · 2.92 KB

SIBOOR-Voron-2.4-AUG

Octopus Pro(446)+BTT Pi + CAN RP2040

SSH

login as: biqu
password: biqu

OS image

  • The latest system image is here

WIFI Settings

  • After the OS writes to the SD card, there is a FAT32 partition named BOOT, open system.cfg file with Notpad, Notpad++ or VSCode.

  • Set WIFI_SSID as your actual wifi name and WIFI_PASSWD as your actual wifi password, The space character can be parsed normally without additional escape character.


  • Then power on the btt pi, go to the backend of your router, look for a device named BTT-CB1, remember this IP address,
    and use tools such as putty or MobaXterm.

  • Make ssh connection

Connect the motherboard and EBB

  • Connect the motherboard to the Pi using a USB cable
    • Connect via ssh and enter the following command
      cd ~/CanBoot/scripts
      python3 flash_can.py -i can0 -q



  • The UUID displayed at this time is the UUID of the motherboard canbus.
    • Copy it and paste it into our cfg document.



  • Then connect to EBB canbus and enter this command again
    • Use RJ11 adapter to connect, pay attention to the position of green and yellow.




    • It should be noted that the EBB canbus needs to be shorted to 120R, otherwise it cannot be connected.


    • python3 flash_can.py -i can0 -q



  • This is the UUID of EBB canbus, Copy it and paste it here.



  • Then press this button, save and restart, and the device connection is completed.