[WIP] 振る舞いテストの追加

.rspec

@@ -0,0 +1,3 @@
+--color
+--require spec_helper
+-r turnip/rspec

Gemfile

@@ -3,7 +3,14 @@ source 'https://rubygems.org'
 ruby '2.1.5'
 
 gem 'rails', '4.1.8'
-gem 'sqlite3', group: [:development, :test]
+group :development, :test do
+  gem 'sqlite3'
+  gem 'turnip'
+  gem 'rspec-rails'
+  gem 'capybara'
+  gem 'poltergeist'
+end
+
 gem 'pg', group: :production
 gem 'sass-rails', '~> 4.0.3'
 gem 'uglifier', '>= 1.3.0'

Gemfile.lock

@@ -42,6 +42,13 @@ GEM
       sass (~> 3.2)
       thor
     builder (3.2.2)
+    capybara (2.4.4)
+      mime-types (>= 1.16)
+      nokogiri (>= 1.3.3)
+      rack (>= 1.0.0)
+      rack-test (>= 0.5.4)
+      xpath (~> 2.0)
+    cliver (0.3.2)
     coderay (1.1.0)
     coffee-rails (4.0.1)
       coffee-script (>= 2.2.0)
@@ -50,8 +57,11 @@ GEM
       coffee-script-source
       execjs
     coffee-script-source (1.8.0)
+    diff-lcs (1.2.5)
     erubis (2.7.0)
     execjs (2.2.2)
+    gherkin (2.12.2)
+      multi_json (~> 1.3)
     hike (1.2.3)
     i18n (0.6.11)
     icalendar (2.2.1)
@@ -68,12 +78,20 @@ GEM
     mem (0.1.5)
     method_source (0.8.2)
     mime-types (2.4.3)
+    mini_portile (0.6.1)
     minitest (5.5.0)
     multi_json (1.10.1)
     neat (1.5.1)
       bourbon (>= 3.1)
       sass (~> 3.2.19)
+    nokogiri (1.6.5)
+      mini_portile (~> 0.6.0)
     pg (0.17.1)
+    poltergeist (1.5.1)
+      capybara (~> 2.1)
+      cliver (~> 0.3.1)
+      multi_json (~> 1.0)
+      websocket-driver (>= 0.2.0)
     pry (0.10.1)
       coderay (~> 1.1.0)
       method_source (~> 0.8.1)
@@ -107,6 +125,26 @@ GEM
     rake (10.4.2)
     rdoc (4.2.0)
       json (~> 1.4)
+    rspec (3.1.0)
+      rspec-core (~> 3.1.0)
+      rspec-expectations (~> 3.1.0)
+      rspec-mocks (~> 3.1.0)
+    rspec-core (3.1.7)
+      rspec-support (~> 3.1.0)
+    rspec-expectations (3.1.2)
+      diff-lcs (>= 1.2.0, < 2.0)
+      rspec-support (~> 3.1.0)
+    rspec-mocks (3.1.3)
+      rspec-support (~> 3.1.0)
+    rspec-rails (3.1.0)
+      actionpack (>= 3.0)
+      activesupport (>= 3.0)
+      railties (>= 3.0)
+      rspec-core (~> 3.1.0)
+      rspec-expectations (~> 3.1.0)
+      rspec-mocks (~> 3.1.0)
+      rspec-support (~> 3.1.0)
+    rspec-support (3.1.2)
     sass (3.2.19)
     sass-rails (4.0.5)
       railties (>= 4.0.0, < 5.0)
@@ -133,6 +171,9 @@ GEM
     tilt (1.4.1)
     turbolinks (2.5.3)
       coffee-rails
+    turnip (1.2.4)
+      gherkin (>= 2.5)
+      rspec (>= 2.14.0, < 4.0)
     tzinfo (1.2.2)
       thread_safe (~> 0.1)
     uglifier (2.6.0)
@@ -142,28 +183,37 @@ GEM
       kgio (~> 2.6)
       rack
       raindrops (~> 0.7)
+    websocket-driver (0.5.1)
+      websocket-extensions (>= 0.1.0)
+    websocket-extensions (0.1.1)
+    xpath (2.0.0)
+      nokogiri (~> 1.3)
 
 PLATFORMS
   ruby
 
 DEPENDENCIES
   bitters
   bourbon
+  capybara
   coffee-rails (~> 4.0.0)
   icalendar
   jbuilder (~> 2.0)
   jquery-rails
   mem
   neat
   pg
+  poltergeist
   pry-rails
   rails (= 4.1.8)
   rails_12factor
   refills!
+  rspec-rails
   sass-rails (~> 4.0.3)
   sdoc (~> 0.4.0)
   spring
   sqlite3
   turbolinks
+  turnip
   uglifier (>= 1.3.0)
   unicorn

spec/rails_helper.rb

@@ -0,0 +1,52 @@
+# This file is copied to spec/ when you run 'rails generate rspec:install'
+ENV["RAILS_ENV"] ||= 'test'
+require 'spec_helper'
+require File.expand_path("../../config/environment", __FILE__)
+require 'rspec/rails'
+require 'turnip_helper'
+
+# Add additional requires below this line. Rails is not loaded until this point!
+
+# Requires supporting ruby files with custom matchers and macros, etc, in
+# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
+# run as spec files by default. This means that files in spec/support that end
+# in _spec.rb will both be required and run as specs, causing the specs to be
+# run twice. It is recommended that you do not name files matching this glob to
+# end with _spec.rb. You can configure this pattern with the --pattern
+# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
+#
+# The following line is provided for convenience purposes. It has the downside
+# of increasing the boot-up time by auto-requiring all files in the support
+# directory. Alternatively, in the individual `*_spec.rb` files, manually
+# require only the support files necessary.
+#
+# Dir[Rails.root.join("spec/support/**/*.rb")].each { |f| require f }
+
+# Checks for pending migrations before tests are run.
+# If you are not using ActiveRecord, you can remove this line.
+ActiveRecord::Migration.maintain_test_schema!
+
+RSpec.configure do |config|
+  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
+  config.fixture_path = "#{::Rails.root}/spec/fixtures"
+
+  # If you're not using ActiveRecord, or you'd prefer not to run each of your
+  # examples within a transaction, remove the following line or assign false
+  # instead of true.
+  config.use_transactional_fixtures = true
+
+  # RSpec Rails can automatically mix in different behaviours to your tests
+  # based on their file location, for example enabling you to call `get` and
+  # `post` in specs under `spec/controllers`.
+  #
+  # You can disable this behaviour by removing the line below, and instead
+  # explicitly tag your specs with their type, e.g.:
+  #
+  #     RSpec.describe UsersController, :type => :controller do
+  #       # ...
+  #     end
+  #
+  # The different available types are documented in the features, such as in
+  # https://relishapp.com/rspec/rspec-rails/docs
+  config.infer_spec_type_from_file_location!
+end

spec/spec_helper.rb

@@ -0,0 +1,85 @@
+# This file was generated by the `rails generate rspec:install` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause this
+# file to always be loaded, without a need to explicitly require it in any files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # This option will default to `true` in RSpec 4. It makes the `description`
+    # and `failure_message` of custom matchers include text for helper methods
+    # defined using `chain`, e.g.:
+    # be_bigger_than(2).and_smaller_than(4).description
+    #   # => "be bigger than 2 and smaller than 4"
+    # ...rather than:
+    #   # => "be bigger than 2"
+    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended, and will default to
+    # `true` in RSpec 4.
+    mocks.verify_partial_doubles = true
+  end
+
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # These two settings work together to allow you to limit a spec run
+  # to individual examples or groups you care about by tagging them with
+  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
+  # get run.
+  config.filter_run :focus
+  config.run_all_when_everything_filtered = true
+
+  # Limits the available syntax to the non-monkey patched syntax that is recommended.
+  # For more details, see:
+  #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
+  #   - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+  #   - http://myronmars.to/n/dev-blog/2014/05/notable-changes-in-rspec-3#new__config_option_to_disable_rspeccore_monkey_patching
+  config.disable_monkey_patching!
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = 'doc'
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+=end
+end

spec/turnip_helper.rb

@@ -0,0 +1,24 @@
+require 'turnip'
+require 'turnip/capybara'
+require 'turnip/rspec'
+require 'capybara'
+require 'capybara/poltergeist'
+
+Capybara.register_driver :poltergeist do |app|
+  Capybara::Poltergeist::Driver.new(app, { js_error: false,
+    default_wait_time: 30, timeout: 100 } )
+end
+
+Capybara.register_driver :pc do |app|
+  Capybara::RackTest::Driver.new(app,
+    headers:  { 'HTTP_USER_AGENT' => 'Mozilla/5.0 (Macintosh; Intel Mac OS X)' } )
+end
+
+Capybara.configure do |config|
+  config.default_driver = :pc
+  config.javascript_driver = :poltergeist
+  config.ignore_hidden_elements = true
+  config.default_wait_time = 30
+end
+
+Dir.glob('spec/steps/*.steps.rb') { |f| load f, true }