Improved the filament runout sensor config for thinker SE/SV2.0

Eryone · Nov 20, 2020 · 1b95780 · 1b95780
1 parent fea27f3
commit 1b95780
Show file tree

Hide file tree

Showing 11 changed files with 16,815 additions and 7 deletions.
diff --git a/THINKER V2/Hex File/THINKER SE/THINKER SE TMC2209 with Filament runout.hex b/THINKER V2/Hex File/THINKER SE/THINKER SE TMC2209 with Filament runout.hex
diff --git a/THINKER V2/config/Eryone/THINKER SE/Stock with Bltouch filament runout/Configuration.h b/THINKER V2/config/Eryone/THINKER SE/Stock with Bltouch filament runout/Configuration.h
@@ -134,7 +134,7 @@
 #endif
 
 // Name displayed in the LCD "Ready" message and Info menu
-#define CUSTOM_MACHINE_NAME "Thinker V2_BL"
+#define CUSTOM_MACHINE_NAME "Thinker V2_BL_FL"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like http://www.uuidgenerator.net/version4

diff --git a/THINKER V2/config/Eryone/THINKER SE/Stock with Bltouch filament runout/Configuration_adv.h b/THINKER V2/config/Eryone/THINKER SE/Stock with Bltouch filament runout/Configuration_adv.h
@@ -1729,7 +1729,7 @@
                                                   // This short retract is done immediately, before parking the nozzle.
   #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     30//10  // (mm/s) Unload filament feedrate. This can be pretty fast.
   #define FILAMENT_CHANGE_UNLOAD_ACCEL        16//25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH      450//100  // (mm) The length of filament for a complete unload.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH       25//100  // (mm) The length of filament for a complete unload.
                                                   //   For Bowden, the full length of the tube and nozzle.
                                                   //   For direct drive, the full length of the nozzle.
                                                   //   Set to 0 for manual unloading.

diff --git a/THINKER V2/config/Eryone/THINKER SE/Stock with TMC2209 sensorless Bltouch/Configuration.h b/THINKER V2/config/Eryone/THINKER SE/Stock with TMC2209 sensorless Bltouch/Configuration.h
@@ -1119,7 +1119,7 @@
 //#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
   #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
-  #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor.
   #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   //#define FIL_RUNOUT_PULLDOWN      // Use internal pulldown for filament runout pins.
 

diff --git a/...R V2/config/Eryone/THINKER SE/Stock with TMC2209 sensorless Bltouch/Configuration_adv.h b/...R V2/config/Eryone/THINKER SE/Stock with TMC2209 sensorless Bltouch/Configuration_adv.h
@@ -1729,7 +1729,7 @@
                                                   // This short retract is done immediately, before parking the nozzle.
   #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     30//10  // (mm/s) Unload filament feedrate. This can be pretty fast.
   #define FILAMENT_CHANGE_UNLOAD_ACCEL        16//25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH      450//100  // (mm) The length of filament for a complete unload.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH       26//100  // (mm) The length of filament for a complete unload.
                                                   //   For Bowden, the full length of the tube and nozzle.
                                                   //   For direct drive, the full length of the nozzle.
                                                   //   Set to 0 for manual unloading.

diff --git a/THINKER V2/config/Eryone/THINKER SE/Stock with TMC2209 sensorless/Configuration.h b/THINKER V2/config/Eryone/THINKER SE/Stock with TMC2209 sensorless/Configuration.h
@@ -1119,7 +1119,7 @@
 //#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
   #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
-  #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor.
+  #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor.
   #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   //#define FIL_RUNOUT_PULLDOWN      // Use internal pulldown for filament runout pins.