v9.4

- Orange Pi 5 Plus | Resolved an issue where the Ethernet interface names eth0/eth1 could swap on (re)boot. We add a udev rule which assures they are named persistently based on the PCI bus identifier. In case you created own udev rules to mitigate the issue, please check whether they conflict and decide whether to use ours or your solution. The DietPi update will also inform you about this change with a prompt. Many thanks to @dirkhh and many others for reporting this issue: #6592

.build/images/dietpi-installer

@@ -2171,6 +2171,15 @@ _EOF_
 SUBSYSTEM=="leds", KERNEL=="wan_led", ACTION=="add", ATTR{trigger}="netdev", ATTR{device_name}="eth0", ATTR{link}="1", ATTR{rx}="1", ATTR{tx}="1", RUN+="/bin/ip l s up dev eth0", RUN+="/bin/ip l s down dev eth0"
 SUBSYSTEM=="leds", KERNEL=="lan1_led", ACTION=="add", ATTR{trigger}="netdev", ATTR{device_name}="eth1", ATTR{link}="1", ATTR{rx}="1", ATTR{tx}="1", RUN+="/bin/ip l s up dev eth1", RUN+="/bin/ip l s down dev eth1"
 SUBSYSTEM=="leds", KERNEL=="user_led", ACTION=="add", ATTR{trigger}="netdev", ATTR{device_name}="wlan0", ATTR{link}="1", ATTR{rx}="1", ATTR{tx}="1", RUN+="/bin/ip l s up dev wlan0", RUN+="/bin/ip l s down dev wlan0"
+_EOF_
+		# Orange Pi 5 Plus
+		elif (( $G_HW_MODEL == 82 ))
+		then
+			G_DIETPI-NOTIFY 2 'Assuring persistent classic Ethernet interface names: /etc/udev/rules.d/99-dietpi-orangepi5plus.rules'
+			cat << '_EOF_' > /etc/udev/rules.d/99-dietpi-orangepi5plus.rules
+SUBSYSTEM=="net", KERNEL=="eth0", KERNELS=="0004:41:00.0", RUN:="/bin/true"
+SUBSYSTEM=="net", KERNEL=="eth1", KERNELS=="0003:31:00.0", NAME="to_eth0", RUN:="/bin/true"
+SUBSYSTEM=="net", KERNEL=="to_eth0", RUN="/bin/ip l s dev eth0 name eth1", RUN+="/bin/ip l s dev to_eth0 name eth0", RUN+="/bin/udevadm trigger -c add /sys/class/net/eth0 /sys/class/net/eth1"
 _EOF_
 		# Orange Pi 3B/Zero 3/Zero 2W: Module does not load automatically, but we want it loaded on first boot in case firstrun setup is done via WiFi
 		elif [[ $G_HW_MODEL =~ ^(83|87|88)$ ]]

.update/patches

@@ -1582,6 +1582,19 @@ Patch_9_4()
 		[[ -f '/etc/modprobe.d/odroid-cloudshell.conf' ]] && G_EXEC rm /etc/modprobe.d/odroid-cloudshell.conf
 		G_EXEC sed --follow-symlinks -Ei '/^[[:blank:]]*(gpioplug-ir-recv|fbtft_device)[[:blank:]]*$/d' /etc/modules
 
+	# Orange Pi 5 Plus
+	elif (( $G_HW_MODEL == 82 ))
+	then
+		G_DIETPI-NOTIFY 2 'Assuring persistent classic Ethernet interface names: /etc/udev/rules.d/99-dietpi-orangepi5plus.rules'
+		G_WHIP_MSG '[ WARN ] Persistent eth0/eth1 interface names will be applied
+\nSince classic interface names are randomly applied among the two onboard Ethernet adapters, we install a udev rule, which assures they remain the same on each (re)boot:
+- /etc/udev/rules.d/99-dietpi-orangepi5plus.rules
+\nIf you applied an own workaround via /etc/network/interfaces or similar, this will not be affected. But if you created own udev rules to mitigate the issue, please check whether those conflict with ours. Of course you can remove or rename above file to maintain status quo.'
+		cat << '_EOF_' > /etc/udev/rules.d/99-dietpi-orangepi5plus.rules
+SUBSYSTEM=="net", KERNEL=="eth0", KERNELS=="0004:41:00.0", RUN:="/bin/true"
+SUBSYSTEM=="net", KERNEL=="eth1", KERNELS=="0003:31:00.0", NAME="to_eth0", RUN:="/bin/true"
+SUBSYSTEM=="net", KERNEL=="to_eth0", RUN="/bin/ip l s dev eth0 name eth1", RUN+="/bin/ip l s dev to_eth0 name eth0", RUN+="/bin/udevadm trigger -c add /sys/class/net/eth0 /sys/class/net/eth1"
+_EOF_
 	# Orange Pi Zero 3 1.5 GiB RAM: Fix lost Ethernet adapter on reboot: https://github.com/MichaIng/DietPi/issues/6938
 	elif (( $G_HW_MODEL == 83 )) && dpkg-query -s 'linux-u-boot-orangepizero3-next' &> /dev/null
 	then

CHANGELOG.txt

@@ -19,6 +19,7 @@ Enhancements:
 Bug fixes:
 - NanoPi NEO3 | Resolved an issue where the Ethernet adapter was not available after reboots. Many thanks to @murraythegoz for reporting this issue: https://github.com/MichaIng/DietPi/issues/6987
 - Orange Pi Zero 3 | Resolved an issue on the 1.5 GiB RAM variant, where the Ethernet adapter was not available anymore after soft/warm reboots.
+- Orange Pi 5 Plus | Resolved an issue where the Ethernet interface names eth0/eth1 could swap on (re)boot. We add a udev rule which assures they are named persistently based on the PCI bus identifier. In case you created own udev rules to mitigate the issue, please check whether they conflict and decide whether to use ours or your solution. The DietPi update will also inform you about this change with a prompt. Many thanks to @dirkhh and many others for reporting this issue: https://github.com/MichaIng/DietPi/issues/6592
 - DietPi-VPN | Resolved an issue where installing the IPVanish config failed, due to a changed URL, and startup failed on Bookworm systems since their configs contain a deprecated option. Many thanks to @DreamPhreak and @Michael-Robson for reporting this issue: https://github.com/MichaIng/DietPi/issues/7043
 - DietPi-Imager | Resolved an issue where the imager could have failed on GPT partitioned images, if either the source image size did not leave space for the GPT backup partition table, or the first usable LBA/sector was above 34. The GPT backup partition table is now created only at the end of the image generation, not anymore additionally at the start, and the required size it takes is correctly obtained. Many thanks to @SelfhostedPro and @disablewong for reporting this issue: https://github.com/MichaIng/DietPi/issues/7024, https://dietpi.com/forum/t/18035
 - DietPi-Config | Resolved a visual-only failure message on non-RPi systems, when enabling Bluetooth, and an actual failure doing so on Orange Pi Zero 3, Orange Pi 3B and Orange Pi Zero 2W, since the required kernel module "sprdbt_tty" was not loaded. Many thanks to @b9AcE for reporting this issue: https://dietpi.com/forum/t/19929/45