v8.25

- Orange Pi 3B | Add support

.build/images/dietpi-build

@@ -131,6 +131,7 @@ case $HW_MODEL in
 	84) iname='Star64' HW_ARCH=11 root_size=639;;
 	85) iname='ROCK5A' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=752;;
 	86) iname='ASUSTB2' HW_ARCH=3 partition_start=16 root_size=752;;
+	87) iname='OrangePi3B' HW_ARCH=3 PTTYPE='gpt' partition_start=16 root_size=752;;
 	*) G_DIETPI-NOTIFY 1 "Invalid hardware model \"$HW_MODEL\" passed, aborting..."; exit 1;;
 esac
 

.build/images/dietpi-installer

@@ -388,6 +388,7 @@ _EOF_
 						'77' ': ROCK 3A'
 						'78' ': ROCK 5B'
 						'85' ': ROCK 5A'
+						'87' ': Orange Pi 3B'
 						'80' ': Orange Pi 5'
 						'82' ': Orange Pi 5 Plus'
 						'83' ': Orange Pi Zero 3'
@@ -586,7 +587,7 @@ _EOF_
 			G_EXEC mv "DietPi-$G_GITBRANCH/.build/images/U-Boot/99-dietpi-uboot" /etc/initramfs/post-update.d/99-dietpi-uboot
 			G_EXEC sed --follow-symlinks -i 's/arm64/arm/' /etc/initramfs/post-update.d/99-dietpi-uboot
 
-		elif [[ $G_HW_MODEL =~ ^(12|15|16|40|42|43|44|45|46|47|48|52|54|55|56|57|58|59|60|62|63|64|65|66|67|68|72|73|74|77|78|80|82|83|85|86)$ ]]
+		elif [[ $G_HW_MODEL =~ ^(12|15|16|40|42|43|44|45|46|47|48|52|54|55|56|57|58|59|60|62|63|64|65|66|67|68|72|73|74|77|78|80|82|83|85|86|87)$ ]]
 		then
 			armbian_repo=1
 			G_EXEC mv "DietPi-$G_GITBRANCH/.build/images/U-Boot/boot.cmd" /boot/boot.cmd
@@ -627,7 +628,7 @@ setenv rootuuid "true"' /boot/boot.cmd
 				(( $G_HW_MODEL == 15 )) && G_EXEC eval 'echo '\''meson_rng'\'' > /etc/modules-load.d/dietpi-hwrng.conf'
 
 			# Rockchip 64-bit (configs work with Amlogic OOTB)
-			elif [[ $G_HW_MODEL =~ ^(42|43|46|47|55|56|58|68|72|73|77|78|80|82|85|86)$ ]]
+			elif [[ $G_HW_MODEL =~ ^(42|43|46|47|55|56|58|68|72|73|77|78|80|82|85|86|87)$ ]]
 			then
 				G_EXEC sed --follow-symlinks -Ei '/^setenv (kernel|fdt)_addr_r/d' /boot/boot.cmd
 				G_CONFIG_INJECT 'setenv scriptaddr ' 'setenv scriptaddr "0x9000000"' /boot/boot.cmd
@@ -645,6 +646,7 @@ setenv rootuuid "true"' /boot/boot.cmd
 					77) G_CONFIG_INJECT 'fdtfile=' 'fdtfile=rockchip/rk3568-rock-3a.dtb' /boot/dietpiEnv.txt;;
 					78) G_CONFIG_INJECT 'fdtfile=' 'fdtfile=rockchip/rk3588-rock-5b.dtb' /boot/dietpiEnv.txt;;
 					85) G_CONFIG_INJECT 'fdtfile=' 'fdtfile=rockchip/rk3588s-rock-5a.dtb' /boot/dietpiEnv.txt;;
+					87) G_CONFIG_INJECT 'fdtfile=' 'fdtfile=rockchip/rk3566-orangepi-3b.dtb' /boot/dietpiEnv.txt;;
 					*) :;;
 				esac
 				case $G_HW_MODEL in
@@ -1071,6 +1073,7 @@ _EOF_
 				82) model='orangepi5-plus' kernel='rk35xx' branch='legacy';;
 				85) model='rock-5a' kernel='rk35xx' branch='legacy';;
 				86) model='tinkerboard-2' kernel='rockchip64';;
+				87) model='orangepi3b' kernel='rockchip64'; branch='edge';;
 				*) :;;
 			esac
 			# Download and pre-install U-Boot hosted on dietpi.com where it has not been ported to the Armbian Bookworm repo or has been removed completely
@@ -1960,7 +1963,7 @@ _EOF_'
 			/boot/dietpi/func/dietpi-set_hardware serialconsole enable ttyGS0
 
 		# ROCKPro64, ROCK64, Pinebook Pro, NanoPi R4S, Quartz64, ASUS Tinker Board, NanoPi R2S, NanoPi NEO3, NanoPi M4V2, NanoPi M4/T4/NEO4, ROCK 4, ROCK 3A, ASUS Tinker Board 2
-		elif [[ $G_HW_MODEL =~ ^(42|43|46|47|49|52|55|56|58|68|72|77|86)$ ]]
+		elif [[ $G_HW_MODEL =~ ^(42|43|46|47|49|52|55|56|58|68|72|77|86|87)$ ]]
 		then
 			/boot/dietpi/func/dietpi-set_hardware serialconsole enable ttyS2
 

.meta/dietpi-survey_report

@@ -90,6 +90,7 @@ shopt -s extglob
 		[84]='Star64'
 		[85]='ROCK 5A'
 		[86]='ASUS Tinker Board 2'
+		[87]='Orange Pi 3B'
 	)
 
 	## Benchmark data arrays: aBENCH_XX[$HW_MODEL,${aBENCH_XX_INDEX[$HW_MODEL]}]

CHANGELOG.txt

@@ -2,8 +2,8 @@ v8.25
 (2023-12-16)
 
 New images:
-- Star64
-- Orange Pi 3B
+- Star64 | Support for the RISC-V StarFive VisionFive 2 clone from PINE64 has been added to DietPi. The images are highly experimental, like software support for the architecture in general. Find our images here, before they are added to our download page soon: https://dietpi.com/downloads/binaries/testing/
+- Orange Pi 3B | Support for this RK3566 SBC has been added to DietPi. Find our images here, before they are added to our download page soon: https://dietpi.com/downloads/binaries/testing/
 
 Enhancements:
 - Raspberry Pi | We applied preparations for supporting the new official Raspberry Pi firmware and kernel packages, which implies support for Raspberry Pi 5. A script allows to the migration to the new package set, including the switch for the boot mountpoint from /boot to /boot/firmware. Please see the following topic about how to apply the script. Note that it is in beta stage for now, since the change might cause issues among our scripts which we did not detect yet: https://github.com/MichaIng/DietPi/issues/6676

dietpi/func/dietpi-obtain_hw_model

@@ -12,6 +12,7 @@
 	# - Generates /boot/dietpi/.hw_model
 	# - Called from /boot/dietpi/preboot, called by /etc/systemd/system/dietpi-preboot.service
 	#
+	# G_HW_MODEL 87 Orange Pi 3B
 	# G_HW_MODEL 86 ASUS Tinker Board 2
 	# G_HW_MODEL 85 ROCK 5A
 	# G_HW_MODEL 84 Star64
@@ -316,7 +317,12 @@
 
 			G_HW_MODEL=$(mawk 'NR==1' "$FP_G_HW_MODEL_IDENTIFIER")
 
-			if (( $G_HW_MODEL == 86 )); then
+			if (( $G_HW_MODEL == 87 )); then
+
+				G_HW_MODEL_NAME='Orange Pi 3B'
+				G_HW_CPUID=9
+
+			elif (( $G_HW_MODEL == 86 )); then
 
 				G_HW_MODEL_NAME='ASUS Tinker Board 2'
 				G_HW_CPUID=3

dietpi/func/dietpi-set_hardware

@@ -1567,7 +1567,7 @@ Do you want to continue and disable the serial login console?' || return 1
 				elif (( $DIETPIENV || $G_HW_MODEL == 49 || $G_HW_MODEL == 76 || $G_HW_MODEL == 79 ))
 				then
 					local baudrate='115200'
-					if [[ $G_HW_MODEL =~ ^(42|43|46|47|49|55|56|58|68|72|77)$ && $INPUT_ADDITIONAL == 'ttyS2' ]] || [[ $G_HW_MODEL == 73 && $INPUT_ADDITIONAL == 'ttyS'[012] ]] || [[ $G_HW_MODEL =~ ^(76|78|79|80|82|85)$ && $INPUT_ADDITIONAL == 'ttyFIQ0' ]]
+					if [[ $G_HW_MODEL =~ ^(42|43|46|47|49|55|56|58|68|72|77|87)$ && $INPUT_ADDITIONAL == 'ttyS2' ]] || [[ $G_HW_MODEL == 73 && $INPUT_ADDITIONAL == 'ttyS'[012] ]] || [[ $G_HW_MODEL =~ ^(76|78|79|80|82|85)$ && $INPUT_ADDITIONAL == 'ttyFIQ0' ]]
 					then
 						baudrate='1500000'
 						[[ -d /etc/systemd/system/serial-getty@$INPUT_ADDITIONAL.service.d ]] || G_EXEC mkdir "/etc/systemd/system/serial-getty@$INPUT_ADDITIONAL.service.d"