Skip to content

Commit

Permalink
optimize snapmaker config
Browse files Browse the repository at this point in the history
  • Loading branch information
@meiliang1123
meiliang1123 committed Aug 20, 2024
1 parent 84fac16 commit d23034d
Show file tree
Hide file tree
Showing 11 changed files with 284 additions and 464 deletions.
119 changes: 37 additions & 82 deletions resources/profiles/Snapmaker/filament/fdm_filament_abs.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,85 +4,40 @@
"instantiation": "false",
"name": "fdm_filament_abs",
"inherits": "fdm_filament_common",
"hot_plate_temp": [
"90"
],
"hot_plate_temp_initial_layer": [
"90"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_fan_speed": [
"80"
],
"close_fan_the_first_x_layers": [
"3"
],
"filament_flow_ratio": [
"0.93"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_cooling_layer_time": [
"30"
],
"filament_cost": [
"50"
],
"filament_density": [
"1.04"
],
"filament_max_volumetric_speed": [
"16"
],
"filament_retraction_length": [
"0.6"
],
"filament_z_hop": [
"0.7"
],
"nozzle_temperature_initial_layer": [
"260"
],
"nozzle_temperature": [
"260"
],
"temperature_vitrification": [
"189"
],
"fan_max_speed": [
"80"
],
"fan_min_speed": [
"15"
],
"slow_down_min_speed": [
"20"
],
"slow_down_layer_time": [
"3"
],
"enable_pressure_advance": [
"1"
],
"pressure_advance": [
"0.015"
],
"filament_type": [
"ABS"
],
"nozzle_temperature_range_low": [
"240"
],
"nozzle_temperature_range_high": [
"280"
],
"default_filament_colour": [
"#682D35"
],
"filament_notes": [
"eSUN ABS+\nSunlu ABS+\n"
]
}

"default_filament_colour": ["#FF0000"],
"filament_cost": ["100"],
"filament_density": ["1.04"],
"filament_max_volumetric_speed": ["16"],
"filament_settings_id": ["Snapmaker_ABS"],
"filament_type": ["ABS"],
"hot_plate_temp": ["80"],
"hot_plate_temp_initial_layer": ["80"],
"is_custom_defined": "0",

"nozzle_temperature": ["255"],
"nozzle_temperature_initial_layer": ["265"],
"pressure_advance": ["0.03"],
"temperature_vitrification": ["100"],

"overhang_fan_threshold": ["25%"],
"overhang_fan_speed": ["80"],
"close_fan_the_first_x_layers": ["3"],
"filament_flow_ratio": ["0.93"],
"reduce_fan_stop_start_freq": ["1"],
"fan_cooling_layer_time": ["30"],

"filament_retraction_length": ["0.6"],
"filament_z_hop": ["0.7"],

"fan_max_speed": ["80"],
"fan_min_speed": ["15"],
"slow_down_min_speed": ["20"],
"slow_down_layer_time": ["3"],
"enable_pressure_advance": ["1"],

"nozzle_temperature_range_low": ["240"],
"nozzle_temperature_range_high": ["280"],

"filament_notes": ["eSUN ABS+\nSunlu ABS+\n"]
}
103 changes: 33 additions & 70 deletions resources/profiles/Snapmaker/filament/fdm_filament_petg.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,73 +4,36 @@
"instantiation": "false",
"name": "fdm_filament_petg",
"inherits": "fdm_filament_common",
"hot_plate_temp": [
"70"
],
"hot_plate_temp_initial_layer": [
"70"
],
"overhang_fan_threshold": [
"25%"
],
"overhang_fan_speed": [
"90"
],
"filament_flow_ratio": [
"0.95"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_cooling_layer_time": [
"30"
],
"filament_cost": [
"30"
],
"filament_density": [
"1.27"
],
"filament_max_volumetric_speed": [
"10"
],
"filament_retraction_minimum_travel": [
"0"
],
"filament_retraction_length": [
"1.8"
],
"nozzle_temperature_initial_layer": [
"255"
],
"nozzle_temperature": [
"245"
],
"temperature_vitrification": [
"160"
],
"fan_max_speed": [
"90"
],
"fan_min_speed": [
"40"
],
"slow_down_min_speed": [
"20"
],
"enable_pressure_advance": [
"1"
],
"default_filament_colour": [
"#DF6734"
],
"filament_type": [
"PETG"
],
"nozzle_temperature_range_low": [
"220"
],
"nozzle_temperature_range_high": [
"270"
]
}

"default_filament_colour": ["#FF0000"],
"filament_cost": ["100"],
"filament_settings_id": ["Snapmaker_PETG "],

"hot_plate_temp": ["75"],
"hot_plate_temp_initial_layer": ["80"],
"is_custom_defined": "0",
"nozzle_temperature": ["230"],
"nozzle_temperature_initial_layer": ["240"],
"pressure_advance": ["0.03"],
"temperature_vitrification": ["70"],

"overhang_fan_threshold": ["25%"],
"overhang_fan_speed": ["90"],
"filament_flow_ratio": ["0.95"],
"reduce_fan_stop_start_freq": ["1"],
"fan_cooling_layer_time": ["30"],

"filament_density": ["1.27"],
"filament_max_volumetric_speed": ["10"],
"filament_retraction_minimum_travel": ["0"],
"filament_retraction_length": ["1.8"],

"fan_max_speed": ["90"],
"fan_min_speed": ["40"],
"slow_down_min_speed": ["20"],
"enable_pressure_advance": ["1"],

"filament_type": ["PETG"],
"nozzle_temperature_range_low": ["220"],
"nozzle_temperature_range_high": ["270"]
}
96 changes: 35 additions & 61 deletions resources/profiles/Snapmaker/filament/fdm_filament_pla.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -4,64 +4,38 @@
"instantiation": "false",
"name": "fdm_filament_pla",
"inherits": "fdm_filament_common",
"overhang_fan_threshold": [
"0%"
],
"close_fan_the_first_x_layers": [
"1"
],
"filament_flow_ratio": [
"0.98"
],
"reduce_fan_stop_start_freq": [
"1"
],
"fan_cooling_layer_time": [
"100"
],
"filament_cost": [
"60"
],
"filament_density": [
"1.24"
],
"filament_max_volumetric_speed": [
"14"
],
"filament_retraction_length": [
"1.2"
],
"nozzle_temperature_initial_layer": [
"220"
],
"nozzle_temperature": [
"210"
],
"temperature_vitrification": [
"154"
],
"fan_min_speed": [
"100"
],
"slow_down_min_speed": [
"15"
],
"enable_pressure_advance": [
"1"
],
"default_filament_colour": [
"#F8C827"
],
"filament_type": [
"PLA"
],
"nozzle_temperature_range_low": [
"190"
],
"nozzle_temperature_range_high": [
"240"
],
"additional_cooling_fan_speed": [
"70"
]
}

"default_filament_colour": ["#FFFFFF"],
"filament_cost": ["100"],
"filament_flow_ratio": ["0.98"],
"filament_retraction_length": ["2"],
"filament_retraction_speïed": ["60"],
"filament_settings_id": ["Snapmaker_PLA"],

"hot_plate_temp": ["65"],
"hot_plate_temp_initial_layer": ["70"],

"nozzle_temperature": ["215"],
"pressure_advance": ["0.02"],
"temperature_vitrification": ["65"],

"overhang_fan_threshold": ["0%"],
"close_fan_the_first_x_layers": ["1"],

"reduce_fan_stop_start_freq": ["1"],
"fan_cooling_layer_time": ["100"],

"filament_density": ["1.24"],
"filament_max_volumetric_speed": ["14"],

"nozzle_temperature_initial_layer": ["220"],

"fan_min_speed": ["100"],
"slow_down_min_speed": ["15"],
"enable_pressure_advance": ["1"],

"filament_type": ["PLA"],
"nozzle_temperature_range_low": ["190"],
"nozzle_temperature_range_high": ["240"],
"additional_cooling_fan_speed": ["70"]
}
Loading

0 comments on commit d23034d

Please sign in to comment.