Fix printer gcode setting bed temp to nozzle temp Raise3D Pro3 (#7756)

* Fix start gcode setting bed temp to nozzle temp for Raise3D Pro3 Plus left nozzle

Edited Raise3D Pro3 Plus 0.4 nozzle (Left).json
Replaced S{nozzle_temperature_initial_layer[0]} with S[bed_temperature_initial_layer_single] for M140 and M190

* Fix start gcode setting bed temp to nozzle temp for Raise3D Pro3 left nozzle

Edited Raise3D Pro3 0.4 nozzle (Left).json
Replaced S{nozzle_temperature_initial_layer[0]} with S[bed_temperature_initial_layer_single] for M140 and M190

* Update Raise3D Pro3 Plus 0.4 nozzle (Left).json

---------

Co-authored-by: SoftFever <[email protected]>

resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Left).json

@@ -143,10 +143,10 @@
 	"default_filament_profile": [
 		"Raise3D Generic PLA"
 	],
-	"machine_start_gcode": ";Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}\n\nM104 T0 S{nozzle_temperature_initial_layer[0] - 20} ; raise left extruder temp\nM140 S{nozzle_temperature_initial_layer[0]} ; raise bed temp\nM190 S{nozzle_temperature_initial_layer[0]} ; wait for bed temp\nM109 T0 S{nozzle_temperature_initial_layer[0] - 20} ; wait for left extruder temp\nM104 T0 S[nozzle_temperature_initial_layer] ; set left extruder temp\nM109 T0 S[nozzle_temperature_initial_layer] ; wait for left extruder temp\nT0\nG21\nG90\nM82\nM107\nM106 P2 S0\nG1 Z0.3 F500\nG92 E0\nG1 Z0.3 F400\nG1 X100 Y{random(2,8)} F1000\nG1 X170 Y{random(2,8)} E15 F200\nG1 Z5 E15 F200\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 Y30 F2000 ; move away from purge line\nG1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print\nM117 Printing...\nM1001",
+	"machine_start_gcode": ";Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}\n\nM104 T0 S{nozzle_temperature_initial_layer[0] - 20} ; raise left extruder temp\nM140 S[bed_temperature_initial_layer_single] ; raise bed temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 T0 S{nozzle_temperature_initial_layer[0] - 20} ; wait for left extruder temp\nM104 T0 S[nozzle_temperature_initial_layer] ; set left extruder temp\nM109 T0 S[nozzle_temperature_initial_layer] ; wait for left extruder temp\nT0\nG21\nG90\nM82\nM107\nM106 P2 S0\nG1 Z0.3 F500\nG92 E0\nG1 Z0.3 F400\nG1 X100 Y{random(2,8)} F1000\nG1 X170 Y{random(2,8)} E15 F200\nG1 Z5 E15 F200\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 Y30 F2000 ; move away from purge line\nG1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print\nM117 Printing...\nM1001",
 	"machine_end_gcode": "M1002\nM221 T0 S100\nM104 S0\nM140 S0\nM107\nM106 P2 S0\nG91\nG1 E-1 F300\nG1 Z+0.5 E-5 X-20 Y-20 F9000.00\nG28 X0 Y0\nM84\nG90\n",
 	"toolchange_gcode": "; layer [layer_num] tool change",
 	"before_layer_change_gcode": "; before layer [layer_num] change\nG92 E0\n{if layer_z <= initial_layer_print_height + layer_height * 2}\nM109 T0 S{nozzle_temperature_initial_layer[0]}\nM140 S[bed_temperature_initial_layer_single]\n{else}\nM109 T0 S{nozzle_temperature[0]}\nM140 S{bed_temperature[0]}\n{endif}\n{if (filament_type[0] ==\"PLA\" or filament_type[0] ==\"PETG\")}\n{if layer_z >= initial_layer_print_height + layer_height * 2}\nM106 P2 S150\n{elsif layer_z >= initial_layer_print_height + layer_height * 1}\nM106 P2 S100\n{else}\nM106 P2 S0\n{endif}\n{endif}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
-}
+}

resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Left).json

@@ -143,10 +143,10 @@
 	"default_filament_profile": [
 		"Raise3D Generic PLA"
 	],
-	"machine_start_gcode": ";Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}\n\nM104 T0 S{nozzle_temperature_initial_layer[0] - 20} ; raise left extruder temp\nM140 S{nozzle_temperature_initial_layer[0]} ; raise bed temp\nM190 S{nozzle_temperature_initial_layer[0]} ; wait for bed temp\nM109 T0 S{nozzle_temperature_initial_layer[0] - 20} ; wait for left extruder temp\nM104 T0 S[nozzle_temperature_initial_layer] ; set left extruder temp\nM109 T0 S[nozzle_temperature_initial_layer] ; wait for left extruder temp\nT0\nG21\nG90\nM82\nM107\nM106 P2 S0\nG1 Z0.3 F500\nG92 E0\nG1 Z0.3 F400\nG1 X100 Y{random(2,8)} F1000\nG1 X170 Y{random(2,8)} E15 F200\nG1 Z5 E15 F200\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 Y30 F2000 ; move away from purge line\nG1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print\nM117 Printing...\nM1001",
+	"machine_start_gcode": ";Bounding Box: {digits(first_layer_print_min[0],0,2)} {if(first_layer_print_max[0]>300)}{300}{else}{digits(first_layer_print_max[0],0,2)}{endif} {digits(first_layer_print_min[1],0,2)} {if(first_layer_print_max[1]>300)}{300}{else}{digits(first_layer_print_max[1],0,2)}{endif}\n\nM104 T0 S{nozzle_temperature_initial_layer[0] - 20} ; raise left extruder temp\nM140 S[bed_temperature_initial_layer_single] ; raise bed temp\nM190 S{bed_temperature_initial_layer_single} ; wait for bed temp\nM109 T0 S{nozzle_temperature_initial_layer[0] - 20} ; wait for left extruder temp\nM104 T0 S[nozzle_temperature_initial_layer] ; set left extruder temp\nM109 T0 S[nozzle_temperature_initial_layer] ; wait for left extruder temp\nT0\nG21\nG90\nM82\nM107\nM106 P2 S0\nG1 Z0.3 F500\nG92 E0\nG1 Z0.3 F400\nG1 X100 Y{random(2,8)} F1000\nG1 X170 Y{random(2,8)} E15 F200\nG1 Z5 E15 F200\nG92 E0\nG1 Z10 F2000 ; move up from purge line\nG1 Y30 F2000 ; move away from purge line\nG1 X{(first_layer_print_max[0] + first_layer_print_min[0])/2} Y{(first_layer_print_max[1] + first_layer_print_min[1])/2} Z{initial_layer_print_height} ; move to center of print\nM117 Printing...\nM1001",
 	"machine_end_gcode": "M1002\nM221 T0 S100\nM104 S0\nM140 S0\nM107\nM106 P2 S0\nG91\nG1 E-1 F300\nG1 Z+0.5 E-5 X-20 Y-20 F9000.00\nG28 X0 Y0\nM84\nG90\n",
 	"toolchange_gcode": "; layer [layer_num] tool change",
 	"before_layer_change_gcode": "; before layer [layer_num] change\n{if layer_z <= initial_layer_print_height + layer_height * 2}\nM109 T0 S{nozzle_temperature_initial_layer[0]}\nM140 S[bed_temperature_initial_layer_single]\n{else}\nM109 T0 S{nozzle_temperature[0]}\nM140 S{bed_temperature[0]}\n{endif}\n{if (filament_type[0] ==\"PLA\" or filament_type[0] ==\"PETG\")}\n{if layer_z >= initial_layer_print_height + layer_height * 2}\nM106 P2 S150\n{elsif layer_z >= initial_layer_print_height + layer_height * 1}\nM106 P2 S100\n{else}\nM106 P2 S0\n{endif}\n{endif}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
-}
+}