Repository navigation
[ciqlts9_6] Multiple patches tested (8 commits) - #1700
Merged
PlaidCat merged 8 commits intoOct 15, 2026
Merged
Conversation
added 8 commits
October 14, 2026 19:37
jira VULN-186187 cve CVE-2026-45910 commit-author Li Zhijian <lizhijian@fujitsu.com> commit 87bf646 I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a race condition between retransmit_timer() and rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping to zero during timer handler execution. It seems this warning is harmless because rxe_qp_do_cleanup() will flush all pending timers and requests. Example of flow causing the issue: CPU0 CPU1 retransmit_timer() { spin_lock_irqsave rxe_destroy_qp() __rxe_cleanup() __rxe_put() // qp->ref_count decrease to 0 rxe_qp_do_cleanup() { if (qp->valid) { rxe_sched_task() { WARN_ON(rxe_read(task->qp) <= 0); } } spin_unlock_irqrestore } spin_lock_irqsave qp->valid = 0 spin_unlock_irqrestore } Ensure the QP's reference count is maintained and its validity is checked within the timer callbacks by adding calls to rxe_get(qp) and corresponding rxe_put(qp) after use. Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Fixes: d946716 ("RDMA/rxe: Rewrite rxe_task.c") Link: https://patch.msgid.link/20260120074437.623018-1-lizhijian@fujitsu.com Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org> (cherry picked from commit 87bf646) Signed-off-by: CIQ Kernel Automation <ciq_kernel_automation@ciq.com>
jira VULN-179903 cve CVE-2026-23442 commit-author Minhong He <heminhong@kylinos.cn> commit 0641379 __in6_dev_get() can return NULL when the device has no IPv6 configuration (e.g. MTU < IPV6_MIN_MTU or after NETDEV_UNREGISTER). Add NULL checks for idev returned by __in6_dev_get() in both seg6_hmac_validate_skb() and ipv6_srh_rcv() to prevent potential NULL pointer dereferences. Fixes: 1ababeb ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)") Fixes: bf355b8 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Minhong He <heminhong@kylinos.cn> Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it> Link: https://patch.msgid.link/20260316073301.106643-1-heminhong@kylinos.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> (cherry picked from commit 0641379) Signed-off-by: CIQ Kernel Automation <ciq_kernel_automation@ciq.com>
jira VULN-186509 cve CVE-2026-46043 commit-author hkbinbin <hkbinbinbin@gmail.com> commit 7244491 rxe_rcv() currently checks only that the incoming packet is at least header_size(pkt) bytes long before payload_size() is used. However, payload_size() subtracts both the attacker-controlled BTH pad field and RXE_ICRC_SIZE from pkt->paylen: payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt) - RXE_ICRC_SIZE This means a short packet can still make payload_size() underflow even if it includes enough bytes for the fixed headers. Simply requiring header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a packet with a forged non-zero BTH pad can still leave payload_size() negative and pass an underflowed value to later receive-path users. Fix this by validating pkt->paylen against the full minimum length required by payload_size(): header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE. Cc: stable@vger.kernel.org Fixes: 8700e3e ("Soft RoCE driver") Link: https://patch.msgid.link/r/20260401121907.1468366-1-hkbinbinbin@gmail.com Signed-off-by: hkbinbin <hkbinbinbin@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> (cherry picked from commit 7244491) Signed-off-by: CIQ Kernel Automation <ciq_kernel_automation@ciq.com>
jira VULN-190411 cve CVE-2026-46133 commit-author Michael Bommarito <michael.bommarito@gmail.com> commit 4c6f86d Even after applying commit 7244491 ("RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv"), a single unauthenticated UDP packet can still trigger panic. That patch handled payload_size() underflow only for valid opcodes with short packets, not for packets carrying an unknown opcode. The unknown-opcode OOB read described below predates that commit and reaches back to the initial Soft RoCE driver. The check added there reads pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The rxe_opcode[] array has 256 entries but is only populated for defined IB opcodes; any other entry (for example opcode 0xff) is zero-initialized, so length == 0 and the check degenerates to pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES which underflows when length == 0 and passes a huge value to rxe_crc32(), causing an out-of-bounds read of the skb payload. Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after rdma link add rxe0 type rxe netdev eth0 A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and QPN=IB_MULTICAST_QPN triggers: BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170 Read of size 1 at addr ... The buggy address is located 0 bytes to the right of allocated 704-byte region Call Trace: crc32_le+0x115/0x170 rxe_icrc_hdr.isra.0+0x226/0x300 rxe_icrc_check+0x13f/0x3a0 rxe_rcv+0x6e1/0x16e0 rxe_udp_encap_recv+0x20a/0x320 udp_queue_rcv_one_skb+0x7ed/0x12c0 Subsequent packets with the same shape fault on unmapped memory and panic the kernel. The trigger requires only module load and "rdma link add"; no QP, no connection, and no authentication. Fix this by rejecting packets whose opcode has no rxe_opcode[] entry, detected via the zero mask or zero length, before any length arithmetic runs. Cc: stable@vger.kernel.org Fixes: 8700e3e ("Soft RoCE driver") Link: https://patch.msgid.link/r/20260414111555.3386793-1-michael.bommarito@gmail.com Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> (cherry picked from commit 4c6f86d) Signed-off-by: CIQ Kernel Automation <ciq_kernel_automation@ciq.com>
jira VULN-186750 cve CVE-2026-46114 commit-author Michael Bommarito <michael.bommarito@gmail.com> commit 1114c87 atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c unconditionally dereferences 8 bytes at payload_addr(pkt): value = *(u64 *)payload_addr(pkt); check_rkey() previously accepted an ATOMIC_WRITE request with pktlen == resid == 0 because the length validation only compared pktlen against resid. A remote initiator that sets the RETH length to 0 therefore reaches atomic_write_reply() with a zero-byte logical payload, and the responder reads sizeof(u64) bytes from past the logical end of the packet into skb->head tailroom, then writes those 8 bytes into the attacker's MR via rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel tailroom per probe (the other 4 bytes are the packet's own trailing ICRC). IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is protocol-invalid. Hoist a strict length check into check_rkey() so the responder never reaches the unchecked dereference, and keep the existing WRITE-family length logic for the normal RDMA WRITE path. Reproduced on mainline with an unmodified rxe driver: a sustained zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer bytes into the attacker's MR, including recognisable kernel strings and partial kernel-direct-map pointer words. With this patch applied the responder rejects the PDU and the MR stays all-zero. Cc: stable@vger.kernel.org Fixes: 034e285 ("RDMA/rxe: Make responder support atomic write on RC service") Link: https://patch.msgid.link/r/20260418162141.3610201-1-michael.bommarito@gmail.com Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> (cherry picked from commit 1114c87) Signed-off-by: CIQ Kernel Automation <ciq_kernel_automation@ciq.com>
jira VULN-193286 cve CVE-2026-63920 commit-author Qi Tang <tpluszz77@gmail.com> commit dd43367 ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR} cmsgs (and their IPV6_2292* legacy counterparts) by trusting the on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length. The length was validated only at parse time (ipv6_parse_hopopts(), etc.). An nftables payload-write expression can rewrite hdrlen after parsing and before the skb reaches recvmsg; the write itself is in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040 bytes from an 8-byte header. nftables is reachable from an unprivileged user namespace, so this is an unprivileged slab-out-of-bounds read: BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540 put_cmsg+0x3ac/0x540 udpv6_recvmsg+0xca0/0x1250 sock_recvmsg+0xdf/0x190 ____sys_recvmsg+0x1b1/0x620 Add ipv6_get_exthdr_len() which validates that at least two bytes are accessible before reading the hdrlen field, then checks the computed length against skb_tail_pointer(skb), returning 0 on failure. Extension headers are kept in the linear skb area by pskb_may_pull() during input, so skb_tail_pointer() is the correct bound. Use ipv6_get_exthdr_len() at all non-AH call sites: the five standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR) and the three standard cases in the extension-header walk loop (DSTOPTS, ROUTING, default). AH retains an inline bounds check because its length formula differs ((ptr[1]+2)<<2). The walk loop also gets a pre-read bounds check at the top to validate ptr before any case accesses ptr[0] or ptr[1]. When the walk loop detects a corrupted header, return from the function instead of continuing to process later socket options. Cc: stable@vger.kernel.org Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Qi Tang <tpluszz77@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260523143245.2281415-1-tpluszz77@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> (cherry picked from commit dd43367) Signed-off-by: CIQ Kernel Automation <ciq_kernel_automation@ciq.com>
jira VULN-195858 cve CVE-2026-63984 commit-author Rahul Chandelkar <rc@rexion.ai> commit 9d5e7a4 ipv6_rpl_srh_decompress() computes: outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3); hdrlen is __u8. For n >= 127 the result exceeds 255 and silently truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16): (128 * 16) >> 3 = 256, truncated to 0 as __u8 The caller in ipv6_rpl_srh_rcv() then places the compressed header at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8, but the decompressed region occupies buf[0..2055] (8-byte header plus 128 full addresses). The compressed header overlaps the decompressed data, and ipv6_rpl_srh_compress() writes into this overlap, corrupting the routing header of the forwarded packet. The existing guard at exthdrs.c:546 checks (n + 1) > 255, which prevents n+1 from overflowing unsigned char (the segments_left field), but does not prevent the computed hdrlen from overflowing __u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not fit. Tighten the bound to (n + 1) > 127. This caps n at 126, giving hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly past the decompressed region (buf[0..2039]). No overlap. 127 segments is well beyond any realistic RPL deployment. Fixes: 8610c7c ("net: ipv6: add support for rpl sr exthdr") Signed-off-by: Rahul Chandelkar <rc@rexion.ai> Link: https://patch.msgid.link/20260525154031.2290876-1-rc@rexion.ai Signed-off-by: Jakub Kicinski <kuba@kernel.org> (cherry picked from commit 9d5e7a4) Signed-off-by: CIQ Kernel Automation <ciq_kernel_automation@ciq.com>
jira VULN-194643 cve CVE-2026-64383 commit-author Zhao Zhang <zzhan461@ucr.edu> commit 4be31c9 SMB2_flush() keeps its response buffer bookkeeping across replay attempts. If a replayable flush response is received and the retry then fails before cifs_send_recv() stores a replacement response, flush_exit will free the stale response pointer a second time. Reinitialize resp_buftype and rsp_iov at the top of the replay loop so cleanup only acts on response state produced by the current attempt. This fixes a double-free without changing replay handling for successful requests. Fixes: 4f1fffa ("cifs: commands that are retried should have replay flag set") Cc: stable@vger.kernel.org Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Assisted-by: Codex:GPT-5.4 Acked-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Zhao Zhang <zzhan461@ucr.edu> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Steve French <stfrench@microsoft.com> (cherry picked from commit 4be31c9) Signed-off-by: CIQ Kernel Automation <ciq_kernel_automation@ciq.com>
ciq-kernel-automation
Bot
added
the
created-by-kernelci
|
🤖 Validation Checks In Progress Workflow run: https://github.com/ctrliq/kernel-src-tree/actions/runs/38656982262 |
🔍 Diffofdiffs: 1 of 8 backports differs from upstreamOpen to anyone signed in to GitHub. Report expires 2027-01-12 23:47 UTC.
Checked PR revision |
|
✅ Validation checks completed successfully View full results: https://github.com/ctrliq/kernel-src-tree/actions/runs/38656982262 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Summary
This PR has been automatically created after successful completion of all CI stages.
Commit Message(s)
Test Results
✅ Build Stage
✅ Boot Verification
✅ Kernel Selftests
✅ LTP Results
🤖 This PR was automatically generated by GitHub Actions
Run ID: 38627412483