decArgo_20220922_052a commit

decArgo_soft/config/_configParamNames/_config_param_name_302.csv

@@ -57,7 +57,7 @@ CONF_PARAM_DEC_ID;CONF_PARAM_MSG_ID;CONF_PARAM_MSG_LABEL;CONF_PARAM_NAME;CONF_PA
 608;251;Maximum value of transmitted CTD temperature measurements (in milli-DegC).;CONFIG_CtdMaxTransmittedTemperature_mdegC;Maximum value of transmitted Ctd temperature measurements (in milli-DegC).
 609;251;Minimum value of transmitted CTD salinity measurements (in milli-PSU).;CONFIG_CtdMinTransmittedSalinity_mpsu;Minimum value of transmitted Ctd salinity measurements (in milli-PSU).
 610;251;Maximum value of transmitted CTD salinity measurements (in milli-PSU).;CONFIG_CtdMaxTransmittedSalinity_mpsu;Maximum value of transmitted Ctd salinity measurements (in milli-PSU).
-613;251;Maximum value of transmitted CTD salinity measurements (in milli-PSU).;CONFIG_CtdIgnoreSamplesWhenPumpActive_LOGICAL;Ignore sample measurements acquired while the hydraulic pump is running (Yes=1/No=0). 
+613;251;Maximum value of transmitted CTD salinity measurements (in milli-PSU).;CONFIG_AUX_CtdIgnoreSamplesWhenPumpActive_LOGICAL;Ignore sample measurements acquired while the hydraulic pump is running (Yes=1/No=0). 
 614;251;Maximum value of transmitted CTD salinity measurements (in milli-PSU).;CONFIG_PressureOffsetResetAtSurface_LOGICAL;Reset the surface pressure offset value when the float is at the surface (Yes=1/No=0)
 615;-1; = PC 0 1 4 + 0 if 'raw' = PC 0 1 4 + 0.5 otherwise;CONFIG_CTDPumpStopPressurePlusThreshold_dbar;The sum of CONFIG_CTDPumpStopPressure_dbar plus a pressure threshold or overlap (Poverlap). For PROVOR floats, Poverlap is defined as follows:  Poverlap = bin_size/2 for PROVOR floats with software versions < 5816A00 and ARVOR floats with software versions < 5605A00. Poverlap = 0.5 dbar for PROVOR floats with software versions >= 5816A00 and ARVOR floats with software versions >=5605A00.
 620;251;Minimum value of transmitted OPTODE D phase measurements (in degrees).;CONFIG_OptodeMinTransmittedDPhase_angularDeg;Minimum value of transmitted Optode D phase measurements (in degrees).

decArgo_soft/config/_configParamNames/_config_param_name_302.json

@@ -316,39 +316,39 @@
       "CONF_PARAM_DEC_ID" : "500",
       "CONF_PARAM_MSG_ID" : "251",
       "CONF_PARAM_MSG_LABEL" : "Sampling period of the <Sensor> during the descent to parking pressure in the depth zone #<Z> (in seconds).",
-      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>DepthZone<N>DescentToParkPresSamplingPeriod_seconds",
+      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>DescentToParkPhaseDepthZone<N>SamplingPeriod_seconds",
       "CONF_PARAM_DESCRIPTION" : "Sampling period of the <short_sensor_name> during the descent to parking pressure in the depth zone #<N> (in seconds)."
    },
    "CONF_PARAM_41" :
    {
       "CONF_PARAM_DEC_ID" : "501",
       "CONF_PARAM_MSG_ID" : "251",
       "CONF_PARAM_MSG_LABEL" : "Sampling period of the <Sensor> during the drift at parking pressure in the depth zone #<Z> (in minutes).",
-      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>DepthZone<N>DriftAtParkPresSamplingPeriod_minutes",
+      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>ParkDriftPhaseDepthZone<N>SamplingPeriod_seconds",
       "CONF_PARAM_DESCRIPTION" : "Sampling period of the <short_sensor_name> during the drift at parking pressure in the depth zone #<N> (in minutes)."
    },
    "CONF_PARAM_42" :
    {
       "CONF_PARAM_DEC_ID" : "502",
       "CONF_PARAM_MSG_ID" : "251",
       "CONF_PARAM_MSG_LABEL" : "Sampling period of the <Sensor> during the descent to profile pressure in the depth zone #<Z> (in seconds).",
-      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>DepthZone<N>DescentToProfilePresSamplingPeriod_seconds",
+      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>DescentToProfPhaseDepthZone<N>SamplingPeriod_seconds",
       "CONF_PARAM_DESCRIPTION" : "Sampling period of the <short_sensor_name> during the descent to profile pressure in the depth zone #<N> (in seconds)."
    },
    "CONF_PARAM_43" :
    {
       "CONF_PARAM_DEC_ID" : "503",
       "CONF_PARAM_MSG_ID" : "251",
       "CONF_PARAM_MSG_LABEL" : "Sampling period of the <Sensor> during the drift at profile pressure in the depth zone #<Z> (in minutes).",
-      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>DepthZone<N>DriftAtProfilePresSamplingPeriod_minutes",
+      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>ProfDriftPhaseDepthZone<N>SamplingPeriod_seconds",
       "CONF_PARAM_DESCRIPTION" : "Sampling period of the <short_sensor_name> during the drift at profile pressure in the depth zone #<N> (in minutes)."
    },
    "CONF_PARAM_44" :
    {
       "CONF_PARAM_DEC_ID" : "504",
       "CONF_PARAM_MSG_ID" : "251",
       "CONF_PARAM_MSG_LABEL" : "Sampling period of the <Sensor> during the ascending profile in the depth zone #<Z> (in seconds).",
-      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>DepthZone<N>AscentSamplingPeriod_seconds",
+      "CONF_PARAM_NAME" : "CONFIG_<short_sensor_name>AscentPhaseDepthZone<N>SamplingPeriod_seconds",
       "CONF_PARAM_DESCRIPTION" : "Sampling period of the <short_sensor_name> during the ascending profile in the depth zone #<N> (in seconds)."
    },
    "CONF_PARAM_45" :
@@ -468,7 +468,7 @@
       "CONF_PARAM_DEC_ID" : "613",
       "CONF_PARAM_MSG_ID" : "251",
       "CONF_PARAM_MSG_LABEL" : "Maximum value of transmitted CTD salinity measurements (in milli-PSU).",
-      "CONF_PARAM_NAME" : "CONFIG_CtdIgnoreSamplesWhenPumpActive_LOGICAL",
+      "CONF_PARAM_NAME" : "CONFIG_AUX_CtdIgnoreSamplesWhenPumpActive_LOGICAL",
       "CONF_PARAM_DESCRIPTION" : "Ignore sample measurements acquired while the hydraulic pump is running (Yes=1/No=0). "
    },
    "CONF_PARAM_60" :