decArgo_20170530_012a commit

euroargodev · Nov 24, 2022 · 9719d18 · 9719d18
1 parent 62fea1d
commit 9719d18
Show file tree

Hide file tree

Showing 91 changed files with 5,150 additions and 2,131 deletions.
diff --git a/decArgo_config_floats/argoFloatInfo/argo_floats_information_co.xls b/decArgo_config_floats/argoFloatInfo/argo_floats_information_co.xls
diff --git a/decArgo_doc/decoder_user_manual/_CoriolisArgoFloatVersions_20170410.xlsx b/decArgo_doc/decoder_user_manual/_CoriolisArgoFloatVersions_20170410.xlsx
diff --git a/decArgo_doc/decoder_user_manual/_CoriolisArgoFloatVersions_20170516.xlsx b/decArgo_doc/decoder_user_manual/_CoriolisArgoFloatVersions_20170516.xlsx
diff --git a/decArgo_doc/decoder_versions/_argo_decoder_versions.xlsx b/decArgo_doc/decoder_versions/_argo_decoder_versions.xlsx
diff --git a/decArgo_doc/decoder_versions/_argo_tools_histo_soft.xlsx b/decArgo_doc/decoder_versions/_argo_tools_histo_soft.xlsx
diff --git a/decArgo_soft/config/_configParamNames/_config_param_name_212.csv b/decArgo_soft/config/_configParamNames/_config_param_name_212.csv
@@ -53,7 +53,7 @@ TC24;Coefficient de calibrage pression Coeff A (coefficient de calibration utili
 TC25;Coefficient de calibrage pression Coeff B (coefficient de calibration utilis� pour convertir la pression interne).;TBD;CONFIG_InternalPressureCalibrationCoef2_NUMBER;Second coefficient used to compute float internal pressure in mBars from sensor counts.
 IC00;Nb of day without surface emergence if Ice detected;TBD;CONFIG_IceDetectionSpringInhibitionDelaySinceLastIceEvasion_days;Maximum delay (in days/cycles) since the last ice evasiondate to attempt a surfacing.  This is often called the 'Spring', where the float stays underwater for a time even though the temperature has warmed.
 IC01;Nb of day before surface emergence even with ice detected;TBD;CONFIG_IceDetectionMaxDaysNoTransmission_NUMBER;Maximum delay (in days/cycles) of no transmission due to the ice detection algorithm. This parameter is used to disable the ice detection algorithmand force the float to surface even if ice is detected.
-IC02;Nb of detection to confirm Ice at surface;TBD;CONFIG_IceDetectionConsecutiveDetectionBeforeFloatSurfaceInhibition_Number;Number of consecutive ISA detections before float surface inhibition.If fewer consecutive ice detections are made, then the float will immediately seek the surface if mixed layer temp is warm.
+IC02;Nb of detection to confirm Ice at surface;TBD;CONFIG_IceDetectionConsecutiveDetectionBeforeFloatSurfaceInhibition_NUMBER;Number of consecutive ISA detections before float surface inhibition.If fewer consecutive ice detections are made, then the float will immediately seek the surface if mixed layer temp is warm.
 IC03;Start pressure detection;TBD;CONFIG_IceDetectionMixedLayerPMax_dbar;Maximum sampling pressure used by ice cover detection algorithm. i.e. start pressure threshold for the ice detection algorithm.
 IC04;Stop pressure detection;TBD;CONFIG_IceDetectionMixedLayerPMin_dbar;Minimum sampling pressure used by ice cover detection algorithm.
 IC05;Temperature threshold;TBD;CONFIG_IceDetection_degC;Ice temperature in [degree Celsius/1e3] where profiles are aborted because of ice formation conditions

diff --git a/decArgo_soft/config/_configParamNames/_config_param_name_212.json b/decArgo_soft/config/_configParamNames/_config_param_name_212.json
@@ -436,7 +436,7 @@
       "CONF_PARAM_DEC_ID" : "IC02",
       "CONF_PARAM_LABEL" : "Nb of detection to confirm Ice at surface",
       "CONF_PARAM_DEFINITION" : "TBD",
-      "CONF_PARAM_NAME" : "CONFIG_IceDetectionConsecutiveDetectionBeforeFloatSurfaceInhibition_Number",
+      "CONF_PARAM_NAME" : "CONFIG_IceDetectionConsecutiveDetectionBeforeFloatSurfaceInhibition_NUMBER",
       "CONF_PARAM_DESCRIPTION" : "Number of consecutive ISA detections before float surface inhibition.If fewer consecutive ice detections are made, then the float will immediately seek the surface if mixed layer temp is warm."
    },
    "CONF_PARAM_56" :

diff --git a/decArgo_soft/config/_techParamNames/_tech_param_name_1.csv b/decArgo_soft/config/_techParamNames/_tech_param_name_1.csv
@@ -50,3 +50,5 @@ TECH_PARAM_DEC_ID;TECH_PARAM_MSG_ID;TECH_PARAM_MSG_LABEL;TECH_PARAM_NAME;TECH_PA
 122;34;profile descent stop time;CLOCK_EndDescentToProfile_HHMM;time when float reaches profile pressure  (tenths of an hour since midnight)
 110;35;RTC state indicator ( normal = 0, failure = 1);FLAG_RTCStatus_LOGICAL;real time clock status - 1= OK, 0=not OK
 410;36;number of entrance in profile target range (descent);NUMBER_DescentToProfileEntriesInProfileMargin_COUNT;descent to profile pressure: number of entries in margin around profile pressure target  - specifically, how many times the float enters the band of pressure surrounding the target profile pressure (generally +/- 30db)
+1000;-1;Number of tech messages received;TECH_AUX_NUMBER_TechnicalMessageReceived_COUNT;Number of times technical message has been received.
+1001;-1;Argos data file time span;TECH_AUX_TIME_ArgosReceivedDataTimeSpan_HHMMSS;Time difference between first and last Argos float messages assigned to the cycle.
diff --git a/decArgo_soft/config/_techParamNames/_tech_param_name_1.json b/decArgo_soft/config/_techParamNames/_tech_param_name_1.json
@@ -406,5 +406,21 @@
       "TECH_PARAM_MSG_LABEL" : "number of entrance in profile target range (descent)",
       "TECH_PARAM_NAME" : "NUMBER_DescentToProfileEntriesInProfileMargin_COUNT",
       "TECH_PARAM_DESCRIPTION" : "descent to profile pressure: number of entries in margin around profile pressure target  - specifically, how many times the float enters the band of pressure surrounding the target profile pressure (generally +/- 30db)"
+   },
+   "TECH_PARAM_52" :
+   {
+      "TECH_PARAM_DEC_ID" : "1000",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Number of tech messages received",
+      "TECH_PARAM_NAME" : "TECH_AUX_NUMBER_TechnicalMessageReceived_COUNT",
+      "TECH_PARAM_DESCRIPTION" : "Number of times technical message has been received."
+   },
+   "TECH_PARAM_53" :
+   {
+      "TECH_PARAM_DEC_ID" : "1001",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Argos data file time span",
+      "TECH_PARAM_NAME" : "TECH_AUX_TIME_ArgosReceivedDataTimeSpan_HHMMSS",
+      "TECH_PARAM_DESCRIPTION" : "Time difference between first and last Argos float messages assigned to the cycle."
    }
 }
diff --git a/decArgo_soft/config/_techParamNames/_tech_param_name_11.json b/decArgo_soft/config/_techParamNames/_tech_param_name_11.json
@@ -406,5 +406,21 @@
       "TECH_PARAM_MSG_LABEL" : "number of entrance in profile target range (descent)",
       "TECH_PARAM_NAME" : "NUMBER_DescentToProfileEntriesInProfileMargin_COUNT",
       "TECH_PARAM_DESCRIPTION" : "descent to profile pressure: number of entries in margin around profile pressure target  - specifically, how many times the float enters the band of pressure surrounding the target profile pressure (generally +/- 30db)"
+   },
+   "TECH_PARAM_52" :
+   {
+      "TECH_PARAM_DEC_ID" : "1000",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Number of tech messages received",
+      "TECH_PARAM_NAME" : "TECH_AUX_NUMBER_TechnicalMessageReceived_COUNT",
+      "TECH_PARAM_DESCRIPTION" : "Number of times technical message has been received."
+   },
+   "TECH_PARAM_53" :
+   {
+      "TECH_PARAM_DEC_ID" : "1001",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Argos data file time span",
+      "TECH_PARAM_NAME" : "TECH_AUX_TIME_ArgosReceivedDataTimeSpan_HHMMSS",
+      "TECH_PARAM_DESCRIPTION" : "Time difference between first and last Argos float messages assigned to the cycle."
    }
 }
diff --git a/decArgo_soft/config/_techParamNames/_tech_param_name_12.csv b/decArgo_soft/config/_techParamNames/_tech_param_name_12.csv
@@ -50,3 +50,5 @@ TECH_PARAM_DEC_ID;TECH_PARAM_MSG_ID;TECH_PARAM_MSG_LABEL;TECH_PARAM_NAME;TECH_PA
 122;34;profile descent stop time;CLOCK_EndDescentToProfile_HHMM;time when float reaches profile pressure  (tenths of an hour since midnight)
 110;35;RTC state indicator ( normal = 0, failure = 1);FLAG_RTCStatus_LOGICAL;real time clock status - 1= OK, 0=not OK
 410;36;number of entrance in profile target range (descent);NUMBER_DescentToProfileEntriesInProfileMargin_COUNT;descent to profile pressure: number of entries in margin around profile pressure target  - specifically, how many times the float enters the band of pressure surrounding the target profile pressure (generally +/- 30db)
+1000;-1;Number of tech messages received;TECH_AUX_NUMBER_TechnicalMessageReceived_COUNT;Number of times technical message has been received.
+1001;-1;Argos data file time span;TECH_AUX_TIME_ArgosReceivedDataTimeSpan_HHMMSS;Time difference between first and last Argos float messages assigned to the cycle.
diff --git a/decArgo_soft/config/_techParamNames/_tech_param_name_12.json b/decArgo_soft/config/_techParamNames/_tech_param_name_12.json
@@ -406,5 +406,21 @@
       "TECH_PARAM_MSG_LABEL" : "number of entrance in profile target range (descent)",
       "TECH_PARAM_NAME" : "NUMBER_DescentToProfileEntriesInProfileMargin_COUNT",
       "TECH_PARAM_DESCRIPTION" : "descent to profile pressure: number of entries in margin around profile pressure target  - specifically, how many times the float enters the band of pressure surrounding the target profile pressure (generally +/- 30db)"
+   },
+   "TECH_PARAM_52" :
+   {
+      "TECH_PARAM_DEC_ID" : "1000",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Number of tech messages received",
+      "TECH_PARAM_NAME" : "TECH_AUX_NUMBER_TechnicalMessageReceived_COUNT",
+      "TECH_PARAM_DESCRIPTION" : "Number of times technical message has been received."
+   },
+   "TECH_PARAM_53" :
+   {
+      "TECH_PARAM_DEC_ID" : "1001",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Argos data file time span",
+      "TECH_PARAM_NAME" : "TECH_AUX_TIME_ArgosReceivedDataTimeSpan_HHMMSS",
+      "TECH_PARAM_DESCRIPTION" : "Time difference between first and last Argos float messages assigned to the cycle."
    }
 }
diff --git a/decArgo_soft/config/_techParamNames/_tech_param_name_17.json b/decArgo_soft/config/_techParamNames/_tech_param_name_17.json
@@ -406,5 +406,21 @@
       "TECH_PARAM_MSG_LABEL" : "number of entrance in profile target range (descent)",
       "TECH_PARAM_NAME" : "NUMBER_DescentToProfileEntriesInProfileMargin_COUNT",
       "TECH_PARAM_DESCRIPTION" : "descent to profile pressure: number of entries in margin around profile pressure target  - specifically, how many times the float enters the band of pressure surrounding the target profile pressure (generally +/- 30db)"
+   },
+   "TECH_PARAM_52" :
+   {
+      "TECH_PARAM_DEC_ID" : "1000",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Number of tech messages received",
+      "TECH_PARAM_NAME" : "TECH_AUX_NUMBER_TechnicalMessageReceived_COUNT",
+      "TECH_PARAM_DESCRIPTION" : "Number of times technical message has been received."
+   },
+   "TECH_PARAM_53" :
+   {
+      "TECH_PARAM_DEC_ID" : "1001",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Argos data file time span",
+      "TECH_PARAM_NAME" : "TECH_AUX_TIME_ArgosReceivedDataTimeSpan_HHMMSS",
+      "TECH_PARAM_DESCRIPTION" : "Time difference between first and last Argos float messages assigned to the cycle."
    }
 }
diff --git a/decArgo_soft/config/_techParamNames/_tech_param_name_19.csv b/decArgo_soft/config/_techParamNames/_tech_param_name_19.csv
@@ -51,3 +51,5 @@ TECH_PARAM_DEC_ID;TECH_PARAM_MSG_ID;TECH_PARAM_MSG_LABEL;TECH_PARAM_NAME;TECH_PA
 110;35;RTC state indicator ( normal = 0, failure = 1);FLAG_RTCStatus_LOGICAL;real time clock status - 1= OK, 0=not OK
 410;36;number of entrance in profile target range (descent);NUMBER_DescentToProfileEntriesInProfileMargin_COUNT;descent to profile pressure: number of entries in margin around profile pressure target  - specifically, how many times the float enters the band of pressure surrounding the target profile pressure (generally +/- 30db)
 616;37;oxygen sensor state indicator (normal = 0, failure = 1);FLAG_OptodeStatus_LOGICAL;Sensor status - 1= OK, 0=not OK
+1000;-1;Number of tech messages received;TECH_AUX_NUMBER_TechnicalMessageReceived_COUNT;Number of times technical message has been received.
+1001;-1;Argos data file time span;TECH_AUX_TIME_ArgosReceivedDataTimeSpan_HHMMSS;Time difference between first and last Argos float messages assigned to the cycle.
diff --git a/decArgo_soft/config/_techParamNames/_tech_param_name_19.json b/decArgo_soft/config/_techParamNames/_tech_param_name_19.json
@@ -414,5 +414,21 @@
       "TECH_PARAM_MSG_LABEL" : "oxygen sensor state indicator (normal = 0, failure = 1)",
       "TECH_PARAM_NAME" : "FLAG_OptodeStatus_LOGICAL",
       "TECH_PARAM_DESCRIPTION" : "Sensor status - 1= OK, 0=not OK"
+   },
+   "TECH_PARAM_53" :
+   {
+      "TECH_PARAM_DEC_ID" : "1000",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Number of tech messages received",
+      "TECH_PARAM_NAME" : "TECH_AUX_NUMBER_TechnicalMessageReceived_COUNT",
+      "TECH_PARAM_DESCRIPTION" : "Number of times technical message has been received."
+   },
+   "TECH_PARAM_54" :
+   {
+      "TECH_PARAM_DEC_ID" : "1001",
+      "TECH_PARAM_MSG_ID" : "-1",
+      "TECH_PARAM_MSG_LABEL" : "Argos data file time span",
+      "TECH_PARAM_NAME" : "TECH_AUX_TIME_ArgosReceivedDataTimeSpan_HHMMSS",
+      "TECH_PARAM_DESCRIPTION" : "Time difference between first and last Argos float messages assigned to the cycle."
    }
 }