Update default profile (& removal of most stock ArtillerySlicer X3 pr…

…ints)

live/Artillery/0.0.8.ini

@@ -55,15 +55,15 @@ variants = 0.4
 technology = FFF
 bed_model = bed-x3-plus.stl
 bed_texture = bed-x1.png
-default_materials = Generic PLA @Artillery; Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
+default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
 
 [printer_model:X3 Pro]
 name = Artillery Sidewinder X3 Pro
 variants = 0.4
 technology = FFF
 bed_model = bed-x3-pro.stl
 bed_texture = bed-x1.png
-default_materials = Generic PLA @Artillery; Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
+default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3
 
 [printer_model:X4 Plus]
 name = Artillery Sidewinder X4 Plus
@@ -224,15 +224,15 @@ use_volumetric_e = 0
 variable_layer_height = 1
 wipe = 0
 z_offset = 0
-start_gcode = M140 S[first_layer_bed_temperature] ; start bed heating\nG90 ; use absolute coordinates\nM82 ; use absolute distances for extrusion\nG21 ; set units to millimeters\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\nG92 E0 ; Reset Extruder\nG28 ; home all axes\nG29 P7 ; perform bed leveling\nM420 S1 Z2 ; enable auto bed leveling\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nG12 C2 ; Clean Nozzle \nG1 Z5 F3000 ; move z up little to prevent scratching of surface\nG1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\nG1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line\nG1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little\nG1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM140 S[first_layer_bed_temperature] ; start bed heating\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\n\n; Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; perform bed leveling\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Wait for final heating\nG1 Z10 F3000 ; move z up little to prevent scratching of surface\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\n\n; Сlean nozzle\nG92 E0 ; reset extruder\nG1 X150 Y{print_bed_size[1]-0.25} Z0.25 F5000.0 ; move to start position\nG1 X100 Y{print_bed_size[1]-0.25} Z0.25 F1500.0 E30 ; draw the first line\nG1 Z10 F3000 ; move z up little to prevent scratching\nG12 C2 ; clean nozzle\nG1 X25 Y{print_bed_size[1]-0.5} Z0.25 F5000.0 ; move to side a little\nG1 X90 Y{print_bed_size[1]-0.5} Z0.25 F1500.0 E15 ; draw the second line\nG92 E0 ; reset extruder\n\nM221 S{if layer_height<0.075}100{else}95{endif}\n
 
 [printer:*common_X3*]
 inherits = *common_X3_X4*
-default_filament_profile = Generic PLA @Artillery
+default_filament_profile = Artillery PLA @X3
 default_print_profile = X3 Default (0.20mm) @Artillery
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-end_gcode = G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n
+end_gcode = ; After G-Code\nG4 ; wait\nG92 E0 ; prepare to retract\nG1 E-1.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM84 ; disable motors\n
 gcode_flavor = marlin2
 machine_max_acceleration_travel = 3000,1250
 machine_max_acceleration_x = 3000,1000
@@ -314,14 +314,14 @@ inherits = *common_X3*
 printer_model = X3 Plus
 bed_shape = 0x0,300x0,300x300,0x300
 max_print_height = 400
-printer_notes = PRINTER_VENDOR_Artillery
+printer_notes = 
 
 [printer:Artillery Sidewinder X3 Pro]
 inherits = *common_X3*
 printer_model = X3 Pro
 bed_shape = 0x0,240x0,240x240,0x240
 max_print_height = 260
-printer_notes = PRINTER_VENDOR_Artillery
+printer_notes = 
 
 [printer:Artillery Sidewinder X4 Plus]
 inherits = *common_X4*
@@ -684,30 +684,30 @@ solid_infill_speed = 150
 top_solid_infill_speed = 150
 
 [print:X3 Default (0.20mm) @Artillery]
-inherits = *0.20mm*
-external_perimeter_speed = 35
-fill_density = 10%
-fill_pattern = grid
-first_layer_height = 0.25
-gap_fill_speed = 45
-infill_speed = 150
-infill_only_where_needed = 1
-perimeter_speed = 80
-perimeters = 2
-solid_infill_speed = 150
-top_solid_infill_speed = 50
-travel_speed = 250
-compatible_printers_condition = printer_model=~/(X3).*/ and nozzle_diameter[0]==0.4
-
-[print:ArtillerySlicer X3 ABS&PETG&PLA_Silk @Artillery]
-inherits = *common_x3*
-external_perimeter_speed = 50%
-infill_speed = 150
-
-[print:ArtillerySlicer X3 PLA&PLA_HS @Artillery]
 inherits = *common_x3*
-external_perimeter_speed = 50%
-infill_speed = 200
+first_layer_height = 0.2
+perimeters = 2
+seam_position = random
+fill_density = 50%
+infill_anchor = 400%
+small_perimeter_speed = 50%
+external_perimeter_speed = 120
+support_material_speed = 200
+bridge_speed = 70
+gap_fill_speed = 120
+overhang_fan_speed_0 = 80%
+overhang_fan_speed_1 = 50
+overhang_fan_speed_2 = 30
+overhang_fan_speed_3 = 10
+travel_speed = 350
+first_layer_speed = 50
+first_layer_acceleration = 1000
+extrusion_width = 0.4
+first_layer_extrusion_width = 0.5
+perimeter_extrusion_width = 0.4
+infill_overlap = 35%
+resolution = 0.012
+gcode_resolution = 0.012
 
 [print:ArtillerySlicer X3 TPU @Artillery]
 inherits = *common_x3*
@@ -873,7 +873,7 @@ compatible_prints_condition =
 cooling = 1
 enable_dynamic_fan_speeds = 0
 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
+extrusion_multiplier = 0.98
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #E2E2E2
@@ -1096,7 +1096,7 @@ extrusion_multiplier = 1.16
 [filament:Artillery ABS @X3]
 inherits = *common_x3*
 bed_temperature = 100
-compatible_prints = ArtillerySlicer X3 ABS & PETG & PLA_Silk @Artillery
+compatible_prints = X3 Default (0.20mm) @Artillery
 filament_density = 1.04
 filament_retract_length = 1
 filament_retract_speed = 40
@@ -1108,7 +1108,7 @@ temperature = 250
 [filament:Artillery PETG @X3]
 inherits = *common_x3*
 bed_temperature = 90
-compatible_prints = ArtillerySlicer X3 ABS & PETG & PLA_Silk @Artillery
+compatible_prints = X3 Default (0.20mm) @Artillery
 filament_density = 1.26
 filament_retract_length = 1.1
 filament_retract_speed = 40
@@ -1120,8 +1120,8 @@ temperature = 245
 [filament:Artillery PLA @X3]
 inherits = *common_x3*
 bed_temperature = 60
-compatible_prints = ArtillerySlicer X3 PLA & PLA_HS @Artillery
-filament_density = 1.2
+compatible_prints = X3 Default (0.20mm) @Artillery
+filament_density = 1.24
 filament_retract_length = 1
 filament_retract_speed = 60
 filament_type = PLA
@@ -1132,7 +1132,7 @@ temperature = 210
 [filament:Artillery PLA HS @X3]
 inherits = *common_x3*
 bed_temperature = 60
-compatible_prints = ArtillerySlicer X3 PLA & PLA_HS @Artillery
+compatible_prints = X3 Default (0.20mm) @Artillery
 filament_density = 1.2
 filament_retract_length = 1.2
 filament_retract_speed = 60
@@ -1144,7 +1144,7 @@ temperature = 210
 [filament:Artillery PLA Silk @X3]
 inherits = *common_x3*
 bed_temperature = 70
-compatible_prints = ArtillerySlicer X3 ABS & PETG & PLA_Silk @Artillery
+compatible_prints = X3 Default (0.20mm) @Artillery
 filament_density = 1.2
 filament_retract_length = 1
 filament_retract_speed = 40