Embedded Systems | UAV Flight Firmware | Wearable Health Tech | Edge AI
B.Tech CSE (3rd year) at Adamas University, Kolkata
I build hardware and software that work together: flight firmware, sensor-driven wearables and real-time vision on small devices. I am a DGCA-certified drone pilot and the Student Coordinator of the Adamas Robotics & AI Club, where I run UAV and robotics workshops for junior students.
- Porting the ArduCopter flight stack to an indigenous RISC-V board for NIDAR 2026-27 (Team PROJECT DELI)
- Built AyuScan, a wearable patient-monitoring system, and its camera-based extension, AyuScan Contactless
- Completed an embedded firmware internship at C-DAC CINE, IIT Guwahati
- Looking for research and engineering internships in UAV systems, embedded firmware, edge AI and health tech
Code for the AyuScan projects lives in the AyuScan organization.
- Embedded IoT Intern, C-DAC CINE, IIT Guwahati (Jul to Aug 2026): firmware and LVGL touchscreen interfaces for a radiation survey meter on ESP32 and STM32, including Wi-Fi provisioning, live sensor display, configurable thresholds and SD card logging, validated on target hardware.
- Student Coordinator, Adamas Robotics & AI Club (May 2026 to present): lead club operations and run UAV and robotics workshops, covering ArduPilot/PX4, flight controller tuning and drone assembly.
| Area | Tools |
|---|---|
| Languages | Python, C, C++, Embedded C, Java, Bash, JavaScript, HTML5, CSS |
| UAV and flight control | ArduPilot/ArduCopter (porting, HAL, scheduler), PX4, Betaflight, MAVLink, Mission Planner, QGroundControl, SITL, PID tuning |
| Hardware | RISC-V (RV32IM, THEJAS32, ARIES v3), ESP32, STM32, Raspberry Pi 5, Pixhawk, Arduino, BLE, RTOS, UART/I2C/SPI/CAN, PWM |
| Controls and estimation | Complementary filter, DCM, Kalman filter/EKF, biquad filters, sensor fusion |
| AI/ML and vision | YOLO, TinyML, TensorFlow Lite, PyTorch, XGBoost, OpenCV, MediaPipe, edge inference |
| Tools and design | Flask, React, Git, Waf, GCC cross-toolchains, EasyEDA, Fusion 360, SolidWorks, 3D printing (PLA/PETG/TPU) |
- Grand Winner (Healthcare Sector), Project Morpheus 2026, SIT Lonavala
- 1st Prize, National Workshop on Innovative & Sustainable Technologies, IIC Jadavpur University
- 9th Position, Tech Expo 2026, IIT Guwahati
- 1st Position in Robo Soccer and Line Follower (Signifiya 2026) and Robo Terrain (Signifiya 2025)
- Participant, CodeBot Hackathon, ARTPARK IISc Bangalore and TIH IIT Bombay
- DGCA Certified Drone Pilot (Small Category)
I am open to research internships and collaborations in UAV systems, embedded firmware, edge AI and wearable health tech. The best way to reach me is by email or LinkedIn.